Stroj za čiščenje delov

Perkute PF100

Leto izdelave: 1998, stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Isdpfx Asd Dhw Njbxjic Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Used Machine – Mitutoyo Crysta Apex C7106 Here I am offering a very well-maintained 3D coordinate measuring machine (CMM) from Mitutoyo. The machine was manufactured in 2004 and was exclusively operated in a climate-controlled measuring room. This is a top-of-the-line, fully equipped machine, so you can start working with it immediately! We can, of course, organize transport, installation, commissioning, and calibration (factory or DAkkS certification) for you, so you do not have to worry about any of the logistics. Machine configuration can be tailored to your requirements upon request. Typically, these machines are equipped with a rotary and swivel head, including the corresponding probe and modules. A probe rack can also be offered if not already included. We can also provide a software upgrade if required. For specifications, please refer to the PDF or images. Leasing available on request. Iiodpfevpdhxox Abxec (All prices are net plus VAT.)

Stanje: dober (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B, letnik 1991, 3-osni digitalni prikazovalnik, višina konic 160 mm, razdalja med konicama 650 mm, hitrost vretena do 2.500 obr/min, konjiček, set napenjalnih tulec, vpenjalna glava, nosilec, 1 komplet ležiščnih vodil. Iiodpoyn Auxefx Abxoc

Stanje: novo, Table length 330 mm Table width 220 mm Iodpjupw Twofx Abxoic X-travel 210 mm Y-travel 125 mm Table height 150 mm T-slots 12 mm Weight 33 kg Dimensions (L x W x H) 0.41 x 0.35 x 0.22 m Cross table with rotary plate

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (W x D x H): 945 x 830 x 1025 mm External dimensions (W x D x H, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Iijdsxiwc Sopfx Abxjc Spray rate: 4,200 l/h Load capacity: 100 kg The contaminated items to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the wash medium in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump assemblies draw the wash medium from the wash tank and feed it through six stainless steel spray pipes equipped with overlapping flat-jet nozzles. During uniform rotation of the basket, which is driven by the nozzle spray, the cleaning items are thoroughly treated from all sides with the hot solution. When the cleaning cycle is complete, the unit switches off automatically. Advantages - 1 pump, horizontally arranged - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating wash basket made from stainless steel, water-jet driven - Steam extraction - Stainless steel sieve plate with filter intakes above the wash tank - Water shortage protection

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters. Ijdjfg E Hzjpfx Abxsic

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 Iiedpsv Tm Aysfx Abxoc 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Stanje: novo, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Ijdpfx Aolf Tu Uebxsic Total power requirement: 4.0 kW Machine weight approx. 2,800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cuts, especially in difficult-to-machine materials and solid stock. With this machine, MEP offers you a technologically state-of-the-art solution that, thanks to the use of premium materials, features an exceptionally robust and torsion-resistant structure. An extremely sturdy saw frame made of cast iron ensures the necessary stability for outstanding cutting results, and the heavy-duty cast iron columns—over which the saw frame glides on preloaded linear guides—ensure maximum cutting precision even under peak loads. The advanced machine control (MEP NC 5.0) offers the operator maximum ease of use and ensures trouble-free operations (real-time monitoring/evaluation/correction). MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) allow for efficient cutting under all conditions. > The control allows you to store up to 100 cutting programs with different quantities and lengths, minimizing programming time for recurring jobs. > Automatic detection of the saw head start position reduces setup times. > The saw head feed via linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings reduces mechanical vibration during cutting and increases stability. > The automatic alignment of the front saw blade guide head according to the dimensions of the stock to be cut reduces processing time. > Saw blade tensioning is controlled by a brushless motor and is continuously monitored and automatically adjusted to the preset minimum value. EXTREMELY FLEXIBLE > The feed system with a 600 mm stroke is repeatable and able to cut all lengths. > The vertical roller pair allows any type of bar or bundle being fed to be held and aligned. > The vector inverter for infinitely variable adjustment of the blade speed from 15 to 100 m/min enables cutting of all materials. > The motorized chip conveyor can be mounted either to the right or left of the cutting area. FEATURES: Fully automatic control – NC 5.0 - Innovative (Windows CE-based) touch screen control with additional soft-touch buttons for frequent operations - USB port - Joystick for manual axis control (X-Y) - Controlled saw head descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of the preset torque, and precise feed rate adjustment in mm/min - Adjustable/infinite preselection of band speed in m/min - Saw band tensioning with tension monitoring and display via an electronic transducer - Automatic detection of cut start - Large 7" color touch screen for display and selection of all machine functions and parameters, with rapid programming. Displays detailed alarm and error messages - Numerous...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, A single-spindle pick-up lathe is available: maximum swing diameter 250 mm, work spindle nose ASA 6 inch, spindle diameter at front bearing 110 mm, maximum chuck diameter 250 mm, weight 13 t, operating hours: 82,400 h, with documentation. On-site inspection possible. Iiedperdhh Sofx Abxjc

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Precision cross table with leadscrew cover, featuring dovetail slideways that significantly increase table rigidity and allow for backlash elimination in feed movements. Iijdevu Uwuopfx Abxsc Description of the cross table: - The cross table is robustly constructed from high-quality materials. - Perfectly supports operations on drills, milling machines, etc., providing precise positioning during boring or drilling processes. - The leadscrew cover prevents chips from entering the feed drive mechanism. - An additional advantage is the rack scale, which ensures constant visual inspection of the table position along the X and Y axes. - Vernier scale: 4 mm/0.02 mm.