Čistilec nakup rabljenega (268)

Stanje: dober (rabljeno), Trail Jet 30 500 barov, 30 litrov 2600 delovnih ur Kodpoxcx Tfsfx Abbewt

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L102 Fully automatic hot water washing machine for parts, featuring basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Complete system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature – 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Washing time timer freely adjustable (minutes and hours) Entire cleaning machine (inner workings and exterior cladding) manufactured from stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Operating hours counter Steam extraction including condensate recirculation Parts washing machine is as new (pilot plant/technical center machine) Kwjdpsdz Dy Hsfx Abbet OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is subject to change and non-binding. Modifications, errors, and prior sale expressly reserved.

Leto izdelave: 2024, Stanje: novo,

Leto izdelave: 2017, obratovalne ure: 31 h, Stanje: zelo dobro (rabljeno), occasion et très peu utilisée – installation vapeur à haute température du leader du marché HEATWEED - Solution écologique et sans produits chimiques pour éliminer les mauvaises herbes, la mousse et la végétation indésirable - Adaptée au transport par chariot élévateur via fourches à palette - Utilisation possible dans les domaines privé, professionnel et communal - Complément idéal pour l'aménagement paysager et les prestataires de nettoyage de voiries - HEATWEED 22/8 - Moteur essence économique Kwjdpfx Absw Nx E Njbot - Année de fabrication : 2017 - Seulement 31 heures de fonctionnement - Température de l'eau toujours comprise entre 98° et 99°C - Réservoir d'eau de 500 litres - Lance désherbeuse - Enrouleur de tuyau de 15 m - Utilisable et extensible jusqu'à 45 m - Capacité de nettoyage quotidienne de 1700 à 2500 m² - Consommation d'eau jusqu'à 8 litres/minute - Pression réglable en continu jusqu'à 50 bar - Niveau sonore : 76 dB - Réservoir de 31 litres - Poids à vide : 310 kg - Châssis combiné pour groupe moteur et réservoir - Dimensions (L x l x H) : 1050 x 800 x 1035 mm - Documentation technique disponible - Prix neuf : 19 800 € HT Expédition sur palette possible

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 210 letvica, lastna masa: 62 kg, vhodna napetost: 400 V, gorivo: elektrika, trajanje garancije: 6 meseci, KÄRCHER HD 10/21-4S KALTWASSER-HOCHDRUCKREINIGER Dieses Gerät verfügt über neues Zubehör, darunter eine deutsche R+M-Pistole, eine Edelstahl-Lanze, einen stahlumflochtenen Hochdruckschlauch sowie eine verstellbare Düse. Der langlebige Pumpenkopf aus Messing mit neuen Keramikkolben und Dichtungen garantiert einen langen und störungsfreien Betrieb. Ein hocheffizienter Drehstrommotor sorgt für einen stabilen Betrieb, auch bei längerem Einsatz. Mit Betriebsparametern von 210 bar und 1.000 l/h eignet sich die Maschine optimal für schwere Reinigungsarbeiten im Baugewerbe, in der Logistik und in der Landwirtschaft. Jedes angebotene Gerät wird einzeln fotografiert – Sie kaufen exakt das abgebildete Produkt. TECHNISCHE DATEN: Stromversorgung: 3-phasig - 400 V - 50 Hz Förderleistung (l/h): 1.000 Arbeitsdruck (bar): 210 Maximaldruck (bar): 250 Anschlussleistung (kW): 8 Gewicht (kg): 62 Kwodex Tt Saspfx Abbot Abmessungen (L x B x H) (mm): 560 x 500 x 1.090 Schlauchlänge (m): 10 AUSSTATTUNG: NEUE, langlebige Hochdruckpistole der deutschen Marke R+M NEUE Edelstahl-Lanze NEUER verstärkter 10 m Hochdruckschlauch mit Stahlgeflecht NEUE verstellbare Düse WASSERFILTER UND GEKA-KLAUENKUPPLUNGEN – GRATIS WICHTIGE MERKMALE: Offenes Ölsystem – unbegrenzte Betriebsdauer Integrierter Chemikalientank ermöglicht die direkte Dosierung von Reinigungsmitteln über das Gerät Sehr übersichtliches und intuitives Bedienfeld Einfache Bauweise und guter Zugang zu den einzelnen Komponenten unter dem Gehäuse machen das Gerät besonders benutzerfreundlich und wartungsfreundlich

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 230 letvica, lastna masa: 67 kg, vhodna napetost: 400 V, gorivo: elektrika, trajanje garancije: 6 meseci, The high-pressure cleaner Kärcher HD 10/23-4 SX is a highly efficient machine, suitable even for the toughest jobs in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly checked the machine’s functionality. All mechanical parts showing wear and tear were replaced with new components, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting, trouble-free operation without any need for future investment in the machine. Product benefits: The unit comes with new accessories, including a German-made R+M spray gun, stainless steel lance, steel-braided hose, and nozzle. The integrated hose reel with 20m hose facilitates storage and daily use. A robust brass pump head with new ceramic pistons and seals guarantees a long service life and reliable operation. Thanks to its operating parameters of 230 bar and 1,000 l/h, the machine is perfect for heavy-duty work in construction, logistics, and agriculture. Each unit we offer comes with custom photos – you buy exactly the machine you see. Technical data: Model: HD 10/23-4 SX Power supply: 3-phase – 400 V – 50 Hz Pump capacity (l/h): 1,000 Operating pressure (bar): 230 Max. pressure (bar): 253 Power rating (kW): 7.8 Weight (kg): 67 Kwodpfx Asx Ttzusbbet Hose length (m): 20 Dimensions (L x W x H) (mm): 556 x 500 x 1090 Features: NEW R+M (Germany) spray gun NEW 900 mm stainless steel lance NEW reinforced 20 m steel-braided hose NEW nozzle Water filter and GEKA coupling are included free of charge.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, lastna masa: 155 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, temperatura: 155 °C, The Kärcher HDS 1195 S Eco high-pressure cleaner is a highly efficient machine, suitable even for the toughest tasks in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical components showing wear or signs of use were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long and trouble-free operation, without the need for further investment in the machine in the future. Product advantages: The unit comes with brand new accessories, including a R+M professional spray gun made in Germany, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A robust brass pump head with new ceramic pistons and seals guarantees long-lasting, reliable operation. The powerful and efficient 3-phase electric motor ensures excellent performance. With operating parameters of 180 bar pressure and 1200 l/h flow rate, the machine is ideally suited for heavy-duty applications in construction, logistics, and agriculture. Every unit we offer includes individually taken photographs; you will receive exactly the machine shown. Technical specifications: Supply voltage [V]: 400 ~ 3 phase Pump output [l/h]: 1200 Working pressure [bar]: 180 Max. heating temperature [°C]: 85 / 155 Power consumption [kW]: 8.2 Kodsx Tr Duopfx Abbewt Hose length [m]: 10 Fuel tank capacity [l]: 25 Chemical tanks [l]: 20+17 Weight [kg]: 155 Equipment included: NEW R+M pressure gun (made in Germany) NEW 900 mm stainless steel pressure lance NEW reinforced, 10 m steel-braided hose NEW 25° power nozzle Water filter and GEKA connection included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 170 letvica, lastna masa: 96 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, temperatura: 155 °C, The Kärcher HDS 798 C Eco high-pressure cleaner is a highly efficient machine, suitable even for the toughest jobs in large-scale installations. During a comprehensive inspection and refurbishment, our service team thoroughly checked every function of the unit. All mechanical components showing wear or signs of use were replaced with new parts, including ceramic plungers, seals, bearings, and all O-rings. This ensures long-term, reliable operation without the need for additional future investment in the machine. Product advantages: The unit is supplied with brand-new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a hose with steel braiding, and a 25° power nozzle. A robust brass pump head with new ceramic plungers and seals guarantees a long, trouble-free service life. The powerful and efficient 3-phase motor delivers outstanding performance. Thanks to its working parameters of 170 bar and 750 l/h, the machine is perfectly suited for demanding tasks in construction, logistics, and agriculture. Each unit we offer comes with custom-made photos—you buy exactly the machine you see. Technical specifications: Supply voltage [V]: 400 ~ 3-phase Pump output [l/h]: 750 Operating pressure [bar]: 30–170 Max. heating temperature [°C]: 80 / 155 Power rating [kW]: 5.6 Hose length [m]: 10 Weight [kg]: 96 Dimensions (L x W x H mm): 940 x 600 x 740 Kwedpfx Asx Tf Rhsbbst Equipment: NEW R+M German-brand spray gun NEW 900mm stainless steel spray lance NEW 10m reinforced hose with steel braiding NEW 25° power nozzle Water filter and GEKA coupling included in the set free of charge.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, lastna masa: 159 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, temperatura: 155 °C, The Kärcher HDS 8/18-4M high-pressure cleaner is a highly efficient device, suitable even for the toughest tasks in large-scale installations. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for every function. All mechanical components showing signs of wear were replaced with new ones, including ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting, trouble-free operation without the need for further investment in the machine in the future. Product advantages: - The device comes with brand new accessories, including a German-made R+M spray gun, stainless steel lance, high-pressure hose with steel mesh, and a 25° power nozzle. - Robust brass head with new ceramic pistons and seals guarantees long and reliable operation - The powerful and efficient 3-phase motor delivers excellent performance - Thanks to operating parameters of 180 bar and 800 l/h, the machine is well-suited for demanding jobs in construction, logistics, and agriculture - Each machine we offer features unique photos—you receive exactly the machine shown Technical data: Model: HDS 8/18-4M Supply voltage: 400V ~ 3 phases Pump performance (l/h): 400 – 800 Working pressure (bar): 30 – 180 Max. water heating temperature (°C): 80–155 Power consumption (kW): 5.5 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 159 Kwsdpfx Asx Td I Sjbbet Dimensions (L x W x H mm): 1330 x 750 x 1060 Equipment: - NEW pressure gun from German manufacturer R+M - NEW 900 mm stainless steel pressure lance - NEW reinforced 10 m steel-mesh hose - NEW 25° power nozzle - Water filter and GEKA coupler included free in the set.

Stanje: pripravljen za uporabo (rabljen), čistilec hladilne tekočine Kodpfx Aox Ur E Uobbowt

Leto izdelave: 2024, Stanje: kot nova (razstavni stroj), Rolleri C-UP-1500 EVO Support Bar Cleaner for cleaning support slats on flatbed laser machines Milling unit with pneumatic pull device for bridge widths of 3 and 4 mm Kwodpfxjwtqqyo Abbjt Handle length 2000 mm for laser systems with a working width of 2000 mm Demonstration unit

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 1.800 h, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 300 letvica, Falch T3H 300 bar 21 l/min Vroča voda Prva registracija 2007 1812 delovnih ur Nov servis 08/25 Kedjycc Rvepfx Abbswt Generator NOV

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 158 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, ARX-2000 Air Purifier Filter – USED – 157 HOURS AND 58 MINUTES The Arx-2000 air treatment system is an air purifier filter designed for CO2 laser machines; it is specifically dimensioned for MT-1613, MT-2513, and CO2 Conveyor Laser Machines. Equipped with practical casters for easy mobility. Kedpfjt Ua Arox Abbowt Our Arx systems significantly reduce pollutants and odors, ensuring excellent working environment comfort with low noise levels, making for an efficient and effective air treatment system. The Arx-2000 air purifier for laser machines features a filtration system with Glass Fiber and Polyester filters, with the option to add 12 Cylindrical Activated Carbon cartridges and rigid-pocket HEPA filters. A touch screen controller allows easy activation or shutdown of the purifier, monitoring filter status and operating hours. Airflow: 2000 m³/h Motor Power: 2200 W Power Supply Voltage: 220 V Frequency: 50 Hz Inlet Connection: 2 x 150 mm Outlet Connection: 200 mm Filters: Fiber, Polyester (Activated Carbon and HEPA optional)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, WORKSHOP PRESSURE WASHER MP150 Kodpevugwmofx Abbswt Features: Washing is performed in a closed circuit using a cleaning liquid. The detergent is dispensed from the gun nozzle at pressures up to 8 bar, which enables thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils. The washer is ideally suited for turbocharger refurbishment and for cleaning heavily soiled components made of steel, cast iron, aluminium, and other alloys. The washer lid is equipped with pneumatic actuators, enhancing safety and work quality. The cabin is standardly equipped with work area lighting. The washer features a dual-function gun capable of dispensing either air only or air mixed with the cleaning agent. The cleaned item can be dried with compressed air. * Please note: the washer is supplied for self-assembly. Technical data Capacity: 160L Detergent tank capacity: 8-14 L Operating pressure: 5-8 bar Weight: 29 kg Air regulation Pneumatic spray gun Illuminated cabin Work ventilation Dimensions: 770x610x700mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, A workshop parts washer is a versatile tool that should be present in every service shop, garage, or workshop. This indispensable equipment ensures fast and cost-effective removal of dirt and grime. A major advantage is the ability to use the washer indoors. A cabin parts washer guarantees effective removal of all contaminants—from oils to hard-to-reach deposits—while ensuring the safety and long-term performance of your components. The applied technology not only ensures cleanliness but also provides protection against corrosion. Please note that cleaning results will depend on the type of detergents used. The parts washer is designed to use up to 90 litres of cleaning agent, with a maximum tank capacity of 140 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates within a flow rate range of 2.7 to 3.6 litres per minute, providing thorough cleaning of surfaces, including fine cracks, with a powerful jet. The cleaning fluid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer is equipped with four legs for stable operation and an optimised working height. The lid locks automatically when opened. Additionally, the unit features a work surface below the basin level, useful for placing cleaning accessories or washed parts to let them dry. The unit requires self-assembly. Kodorh Ey Repfx Abbowt Technical specifications: Tank capacity: 140 L Max. cleaning fluid volume: 90 L Max. pump capacity: 2.7–3.6 L/min Power supply: 230 V Dimensions: 1130x540x885 mm Tray dimensions: 800x500 mm Weight: 43 kg Power supply: 230 V Self-assembly required. Price shown is NET, exclusive of transport costs. For more information, please contact us by phone or email. Feel free to visit our website to explore our full offer.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables quick and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. The washing process is performed in a closed circuit, using a cleaning fluid heated up to 70°C. The solution is delivered through a spray gun nozzle at a pressure of up to 8 bar, thoroughly cleaning even hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oil. Both temperature and cleaning fluid significantly increase washing effectiveness. The unit features adjustable feet for leveling. The washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made of steel, cast iron, aluminum or other alloys. The washer lid is equipped with pneumatic cylinders, enhancing safety and ease of use. The washer features a dual-function spray gun: it can deliver only air or air mixed with cleaning fluid. Cleaned parts can be dried using compressed air. The washer is equipped with an intuitive control panel. - Adjustable water temperature - Smooth air pressure regulation - Manometer - Separate switch for detergent/water heating - Separate power switch Technical specifications: - Capacity: 160 L - Detergent heating: up to 70°C - Fluid tank capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg Kodpfxsuc Tn Ae Abbewt - Dimensions: 770 × 600 × 1330 mm - Adjustable air supply - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: the parts washer is supplied for self-assembly. Price does not apply to machines purchased in Poland.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: Special offer valid only for customers who attended a demonstration before purchase – in the Otinus Machinery Showroom in Bydgoszcz. Kjdpfer Eqbyex Abbowt Handheld Laser Cleaner “3000W LCH-3000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to either vaporize or dissolve. Laser cleaners are used in various industries, from automotive to heritage conservation. These machines stand out for their high efficiency, minimal waste, and minimal interference with the surface of the cleaned object. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A one-day training session and machine installation – up to 8 hours: installation and training relating to the control unit. Choice of MAX Photonics The brand “MAX Photonics” was established in 2004. The company originated with the production of light and optical sources for scientific institutes. Top priority was given to product quality and operational stability. The company quickly realised that the future of laser technology is closely linked to fiber optics. Research and development, begun in 2007, led to the market introduction of their first 500 CW source in 2014. Since then, the company has been expanding its technologies intensively in the areas of laser cutting, welding, marking, and engraving. Currently, the company offers sources with output up to 40,000 W. At present, its goal is to become a leader in the production of high-power industrial lasers. Raycus “Wuhan Raycus Fiber Laser” was founded in 2007. The company focused on independent research and development, strengthened by mergers with other enterprises. It manufactures laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who attended a demonstration before purchase – at the Otinus machinery showroom in Bydgoszcz. Handheld Laser Cleaner “1500W LCH-1500-N” The laser cleaner is an innovative device for precise and efficient surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from the automotive sector to heritage conservation. These devices are distinguished by their high efficiency, minimal waste, and limited interference with the surface of the cleaned object. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. Kwedpfxsthitps Abbet The following services are included in the machine price: A one-day training session and machine installation, 1 day up to 8 hours – installation and training related to the control unit Options MAX Photonics The “MAX Photonics” brand was established in 2004. The company’s origins lie in the production of light and optics sources for scientific institutes. Quality and stability of product operation were set as the primary goals. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development that began in 2007 led to the 2014 market launch of their first 500-CW source. Since then, the company has actively expanded its technologies in laser cutting, welding, marking, and engraving. Currently, the company offers sources with an output of up to 40,000 W. At present, the company strives to become a leader in the production of ultra-high-power industrial lasers. Raycus The company “Wuhan Raycus Fiber Laser” was founded in 2007. It is focused on independent research and development, bolstered by mergers with other companies. They manufacture laser sources for a wide range of applications – i.e., cutting, welding, soldering, marking, and engraving. Devices of this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who attended a demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz. Handheld Laser Cleaner “1000W LCH-1000-N” The laser cleaner is an innovative device designed for precise and efficient surface cleaning. It focuses a laser beam on contaminants, causing them to vaporize or disintegrate. Laser cleaners are used across various industries, ranging from the automotive sector to heritage conservation. These units are distinguished by high efficiency, minimal waste, and limited interference with the surface of the object being cleaned. Compared to traditional cleaning methods, a laser cleaner can be more precise and economical. The following services are included in the machine price: A 1-day training and machine installation, 1 day up to 8 hours – installation and training related to the control unit Choice of Laser Source Ksdpfx Abothithsbjwt MAX Photonics The brand "MAX Photonics" was established in 2004. The company initially specialized in the production of light and optical sources for scientific institutes. Top priorities were set on product quality and operational reliability. MAX Photonics quickly recognized that the future of laser technology was closely linked to fiber optics. Research and development initiated in 2007 led to the market launch of their first 500-CW source in 2014. Since then, the company has been rapidly developing its technologies in laser cutting, welding, marking, and engraving. The current product range includes sources with output power up to 40,000 W. At present, the company aims to become a leader in the field of ultra-high-power industrial laser production. Raycus Founded in 2007, Wuhan Raycus Fiber Laser focuses on independent research and development, leveraging mergers with other companies. The company manufactures laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free: Special offer only for customers who participated in a demonstration before purchase – in the Otinus machine showroom in Bydgoszcz. Handheld Laser Cleaner “2000W LCH-2000-N” Ksdpfethittsx Abbowt The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or disintegrate. Laser cleaners are used in a wide range of industries, from automotive to monument restoration. These systems are characterized by high efficiency, minimal waste production, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can offer greater precision and cost-effectiveness. The following services are included in the machine price: A one-day training session and machine installation; 1 day, up to 8 hours – installation and training concerning the control unit. Options MAX Photonics The “MAX Photonics” brand was founded in 2004. The company’s roots lie in the production of light and optical sources for scientific institutions. Quality and stability of product performance were defined as top priorities. The company quickly realized that the future of laser technology is closely linked to fiber optics. Research and development began in 2007, leading to the launch of its first 500W continuous wave source in 2014. Since then, the company has significantly expanded its technologies in the fields of laser cutting, welding, marking, and engraving. The company currently offers sources with output powers up to 40,000 W. At present, the company aims to be a leader in manufacturing industrial lasers with ultra-high power. Raycus “Wuhan Raycus Fiber Laser” was established in 2007. The company focuses on independent research and development, resulting from mergers with other firms. They produce laser sources for a wide range of applications including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. Kodpfjxgq I Nsx Abbswt

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Ksdjxgr Rfjpfx Abbswt Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Ksdpfx Ajxgtrqebbswt Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), Throughput depending on material type approx. 0.5–2 t/h Drive power 30 kW Kjdpfxoxgttzj Abbewt A total of four dryers of this model are available.

Stanje: rabljeno, Dry cleaner/friction cleaner with 110 kW drive power. Throughput up to 4 t/h, depending on type of plastic and material thickness. Kedpsxgq Sbjfx Abbjwt