Motorizirane valjčne krivilke za pločevino nad 14 mm debeline nakup rabljenega (116)

Stanje: novo, Sheet thickness: 45 Bending length: 2600 Top roller diameter: 460 Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Four rollers arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roller positioning - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 5,858 - Material feed table EUR 5,100 - Oil cooler STD. - Center support EUR 18,750 Hfjdpfx Aod Ab Rhsh Den - Side supports EUR 12,500 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: dober (rabljeno), Leto izdelave: 2001, Bending length: 4000 mm Bending thickness: 45 mm Pre-bending (cold): 38 mm Drive power: 100 kW Number of rollers: 4 Adjustable rollers: 3 Roll adjustment type: hydraulic Top roll diameter: 710 mm Bottom roll diameter: 640 mm Side roll diameter: 520 mm Hfodpfx Ahsxnk Sqe Den Working speed: 2+4 m/min (up to 8 m/min) Machine weight (with roller): 78 t Additional equipment: Electronic synchronization Air-cooled oil cooler Upper support device Lateral cylinder support device (10 t) Infeed table (20 t) Hydraulic bladder accumulator Cone bending device

Stanje: rabljeno, Leto izdelave: 2007, Dolžina pregibanja 3050 mm Hfsdpfexhgqiex Ah Don Maks. zmogljivost predpregiba 13 mm Maks. zmogljivost valjanja 16 mm Premer zgornjega valja 340 mm Premer spodnjega valja 340 mm Premer stranskega valja 240 mm 4-valjni Popolnoma hidravličen Hidravlični nosilni ležaj Digitalno odčitavanje položajev valjev Opremljen z: Zgornja podpora Stranska podpora

Leto izdelave: 1980, Stanje: dober (rabljeno), with pre-bending Technical Data: Bending length: 2000 mm Max. sheet thickness: 20 mm Pre-bending capacity: 15/11 mm Lower roll diameter: 280 mm Upper roll diameter: 300 mm Main drive power: 16.2 kW Upper roll positioning drive power: 4.8 kW Hfsdpfxjkzg E Ao Ah Dsn Lower roll positioning drive power: 3.7 kW Weight approx.: 14,200 kg Technical data, accessories, and machine description are subject to change and not binding.

Leto izdelave: 1985, Stanje: rabljeno, številka stroja/vozila: 112-176, Technical data: - Bending operation, motorized, with automatic or manual mode - Bending capacity for square steel ST 37 up to approx. 25 mm - Bending capacity for flat steel ST 37 up to approx. 30 x 8 mm - Bending length between rotation units adjustable up to approx. 1000 mm - Faceplate with various profile hole mountings - Tailstock / counter support - Preselection for bending time / preselection for torsion bending length Hsdpfxec I Snzj Ah Defn - Clockwise and counterclockwise operation - Space requirement approx. W 1750 x H 1100 x D 500 mm - Drive 400 V / 0.75 kW - Weight approx. 150 kg

Leto izdelave: 1973, Stanje: skoraj kot novo (rabljeno), Uporabljeni težko-vgradni začetni valji BRONX – Pinch Pyramid. Leto izdelave: 1973. STROJ JE BIL PREJ NAMEŠČEN V PODJETJU ROLLS ROYCE PLC V DERBYJU, VB. TAKOJ ZA PRODAJO IN TRENUTNO SE NAHAJA V BELGIJI, KJER JE MOŽEN OGLED. SPECIFIKACIJA KAPACITETA Dva niza dimenzij "Predgibanje in valjanje" ter "Samo valjanje": Material: navadna konstrukcijska jekla Natezna trdnost: 28/32 ton/palec² Maksimalna širina: 3350 mm (11’) Maksimalna debelina pri tej širini: - Predgibanje in valjanje: 50 mm (2”) - Samo valjanje: 63,5 mm (2½”) Minimalni notranji premer valjanega valja pri maksimalni kapaciteti: - Predgibanje in valjanje: 762 mm (30”) - Samo valjanje: 953 mm (37 ½“) Maksimalna debelina pločevine pri vročem valjanju (dokončna temperatura valjanja 850°C): - Predgibanje in valjanje: 102 mm (4”) - Samo valjanje: 127 mm (5”) Minimalni notranji premer valjanega valja pri maksimalni zmogljivosti vročega valjanja: - Predgibanje in valjanje: 1016 mm (40”) - Samo valjanje: 1270 mm (50”) GLAVNE ZNAČILNOSTI Premer vseh valjev: 686 mm (27”) Dolžina valjev – osnovni del: 3403 mm (11’2”) Hitrost valjanja: 3600 mm/min (12 f.p.m.) Glavni pogonski motor: 150 KM, tip z drsnimi obroči Dva motorja za nastavitev spodnjega valja, vsak: 50 KM, tip z drsnimi obroči Kombinirano upravljanje izvlečnega ležaja in uravnovešenja zgornjega valja: hidravlično Motor hidravlične enote: 10 KM Elektrooprema je primerna za napetost: 400/440 V, 3-fazni, 50 Hz DODATNA OPREMA ZA VALJANJE KLINASTIH (KONIČNIH) OBLIK: Za valjanje stožčastih oz. koničnih oblik je na notranji strani ohišja brez pogona pritrjena drsna plošča. ELEKTRO OPREMA Motorji: - Glavni pogon: 150 KM, polurna nazivna moč, zaščiten pred prahom, talna vgradnja, tip z drsnimi obroči - Nastavitev spodnjega valja: 50 KM, polurna nazivna moč, zaščiteni, talna vgradnja - Motor hidravlične enote: 10 KM, neprekinjeno delujoč, tip "veverični kletki", zaščiten, talna vgradnja Krmilna oprema: - Glavni pogon: reverzibilno bobensko krmilje z uporovnimi grelci, projektirano za 100% obremenitev v vsakem položaju, z blokado v izklopu in končnimi omejitvami, kjer je potrebno - Nastavitev spodnjega valja: enako kot zgoraj - Hidravlična enota: direktno vezan kontaktorski zaganjalnik, vklop preko tipkovnice Elektromagnetni ventili za cilindrično upravljanje se upravljajo s pritiskom na gumb. Opomba: vsa omenjena oprema je zaščitena z odklopnikom, z vgrajeno zaščito proti preobremenitvi in izgubi napetosti. ZNAČILNOSTI IN OPREMA Rezervni valj je priložen stroju. DIMENZIJE Dolžina: podatki v pripravi Širina: podatki v pripravi Višina: podatki v pripravi Teža: 95 ton Hsdpfx Aeh U Rzgsh Dofn OPOMBA: Navedene informacije so podane v dobri veri, vendar zaradi morebitnih napak ali izpustov niso zavezujoče glede točnosti.

Stanje: novo, Bending length: 2600 mm Sheet thickness: 16 mm Top roll diameter: 300 mm Technical specifications: Hfedpod Ab S Usfx Ah Djn - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable from the control panel - All rolls driven by hydraulic motor and planetary gear - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 We have numerous references!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1978, številka stroja/vozila: 4303, Working width: 3000 mm Sheet thickness: 15 mm Sheet thickness for bending: 10 mm Hjdpfx Ahod D Nxxj Djfn Top roll diameter: 320 mm Bottom roll diameter: 310 mm Working speed: approx. 5.5 m/min Electrical connection: 380 V kW Weight: approx. 17,000 kg Space requirement: 5450 x 2100 x 2450 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, A STURDY GIANT FOR BENDING GAS PIPELINES Hodjgurb Hspfx Ah Defn Key Features: • Maximum sheet width: 12,000 mm • Maximum rolling thickness (steel): 12,000 x 28 mm • 3 rolls with variable axis adjustment • Preloading for the top roll • Support for the side rolls • 3-roll drive system • Automatic ejection system Performance for material with a yield strength of 360 N/mm² 12,000 x 17 mm at D= 1,500 mm 12,000 x 15 mm at D= 550 mm 6,000 x 22 mm at D= 1,500 mm 6,000 x 19 mm at D= 550 mm Option to equip the machine with additional exchangeable shafts to achieve a capacity of over 12,000 x 23 mm or for minimal diameters starting from 400 mm. Available for immediate delivery ex works!

Stanje: dober (rabljeno), Leto izdelave: 2019, premer zgornjega valja: 390 mm, delovna širina: 2.500 mm, najv. debelina jeklene pločevine: 28 mm, delovna dolžina: 2.500 mm, Manufacturer: FACCIN Model: 4HEL 2538 Control: Siemens TOUCH Year of manufacture: 2019 Top support Side support with in-feed fingers Fully hydraulic machine Central lubrication Hardened rolls Specifications Metric / US Standard Roll width: 2,500 mm Plate thickness at 3x top roll Ø: 24 mm Plate thickness at 5x top roll Ø: 28 mm Plate thickness during pre-bending: 24 mm Top roll diameter: 390 mm Lower roll diameter: 370 mm Side roll diameter: 300 mm Number of rolls: 4 Bending speed: 0–5 Lower roll adjustment: 0–200 mm/min Side roll adjustment: 0–200 mm/min Control: SIEMENS PGS Classic TOUCH Hfedpfx Aev Tbcboh Dsn Top support: Yes Side support: Yes Number of driven rolls: Yes Dimensions (approximate) Length: 6,200 mm Width: 2,400 mm Height: 3,800 mm Weight: 24,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system Hfedpfxsxd S T Uj Ah Dsn OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Valjarna za pločevino, kapaciteta 3000 mm, H. Vuillot 3000 mm, rabljeni stroj Proizvajalec: H. Vuillot Kapaciteta pločevine: 3000 x 27 mm Hfsdpfowcqpnjx Ah Den Premer zgornjega valja: Ø445 mm Premer spodnjih valjev: Ø330 mm Leto izdelave: 1972

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Three-roll plate bending machine with variable axes Manufacturer: FACCIN, Model HAV/S 3145 Hfsdpfxoc S N Nqj Ah Djn Technical specifications: Number of rolls: Three Side roll geometry: variable Working width: 3000 mm Top roll diameter: 450 mm Variable three-roll plate bending machine

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, moč: 16,5 kW (22,43 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Lower and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * The hydraulically opening head and the automatic upward-moving shaft allow easy removal of the bent workpiece * Easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet unloading system * Precision-ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Hfodjxd S Npjpfx Ah Den Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, FACCIN 4HEP S54 Four-Roller Plate Bending Machine Electronically controlled, electric drive, four-roller plate bending machine Technical Specifications: Number of rollers: Four Side roller geometry: Lever-arm guided Working width: 3,000 mm Top roller diameter: 300 mm Bottom roller diameter: 280 mm Side roller diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500 mm Width: 1,400 mm Height: 1,600 mm Guaranteed Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 18 mm Pre-bending capacity (full working width): 12 mm From pipe diameter: 1,500 mm Hfodpfxsiivgre Ah Djn Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 10 mm From pipe diameter: 450 mm Standard Equipment: Electric drive for the top roller Lever-arm adjustment of the side rollers Extra heavy-duty, double-pinned drop-end bearing Electronic Parallelism System (EPS) Hardened rollers for high wear resistance Cone bending device Mobile control panel 3 digital readouts for side and lower roller positions Safety cable with emergency stop and CE certification

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium gauge, aluminum, or stainless steel materials - Ideal for bending materials into round shapes and various diameters - Bottom and side rolls are hydraulically moved up and down with direct linear motion - Protected against overload - The top roll is driven by an electric motor with a planetary gearbox; the bottom roll is driven through a cardan shaft coupling; two rolls are rotation-driven - Three digital displays allow easy reading of the roll positions - The hydraulically opening head enables easy removal of the bent workpiece - Very easy operation with mobile control panel - Welded steel construction frame - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending system - Hydraulic balancing system for parallel movement of rolls - Complies with EU safety standards and bears CE marking - User manual OPTIONAL EQUIPMENT - Remote assistance via NC control - Overhead crane (elevator) for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual-speed adjustment system - Infinitely variable speed adjustment - Rotation via hydraulic motor drive - Ejector system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Hsdpfx Ahexd S Aie Dsfn Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3500 mm Width: 1500 mm Height: 1370 mm Weight: 4650 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Max. rolling capacity (cold forming): mm 32 Max. bending capacity (cold forming): mm 24 For pipe diameter: mm 2050 For material with yield strength: N/mm² 260 Usable length: mm 3050 Number of rollers: four Top roller diameter: mm 410 Bottom roller diameter: mm 390 Driven rollers: two Rotation speed: 5 m/min Rolling speed: hydraulic Installed power: 30 HP Voltage: 400V, 50Hz, 3Ph Includes: - Hardened & polished rollers Hedpfx Aof T Rzfsh Djfn - Cone bending device - Electronic roller parallelism - Siemens PLC control - CE marking with corresponding drive brake - Mobile control panel

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons Hfodpoxbzr Usfx Ah Don * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Hsdet Akt Ropfx Ah Defn Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system Hjdpfx Aexbzptoh Dofn * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, FACCIN HAV 3293 Plate Width: 3200 mm Top Roll Diameter: 930 mm Side Roll Diameter: 800 mm Machine Weight: 150 tons Rolling Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 155 mm Hfodeiivg Sspfx Ah Don Pre-bending Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 115 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Machine weight (guaranteed) Kg 19,000 Hjdpfx Ajgd T R Deh Dsfn Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, FACCIN 4HEP 3135 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Hfsdpfx Asiivc Dsh Dsn Technical Specifications: Number of rolls: Four Side rolls geometry: Lever arm guidance Working width: 3,000 mm Top roll diameter: 350 mm Bottom roll diameter: 330 mm Side roll diameter: 250 mm Installed power (guaranteed): 14.4 kW Maximum rotation speed (guaranteed): 5 m/min Machine weight (guaranteed): 13,000 kg Length: 5,700 mm Width: 1,800 mm Height: 2,100 mm Guaranteed Performance Data: For material with yield strength 260 N/mm² Rolling capacity (full working width): 20 mm Pre-bending capacity (full working width): 15 mm Minimum rollable diameter: from 1,750 mm Rolling capacity (full working width): 14 mm Pre-bending capacity (full working width): 12 mm Minimum rollable diameter: from 455 mm Standard Equipment: Lever arm movement of side rolls Extra heavy, double-supported drop end bearing Electronic Parallelism System (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, FACCIN 4HEP 3163 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Data: Number of rolls: Four Side roll geometry: Swinging lever guide Working width: 3,000 mm Top roll diameter: 630 mm Bottom roll diameter: 570 mm Side roll diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800 mm Width: 3,600 mm Height: 3,550 mm Guaranteed Performance: for material yield strength of 260 N/mm² Rolling capacity (full working width): 70 mm Pre-bending capacity (full working width): 60 mm from tube diameter: 3,150 mm Hfsdpjiivfqofx Ah Djn Rolling capacity (full working width): 55 mm Pre-bending capacity (full working width): 50 mm from tube diameter: 820 mm Standard Equipment: Swinging lever adjustment of the side rolls Extra heavy-duty, double-supported drop end bearing Electronic parallelism system (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for the side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, FACCIN HAV 3162 Variable 3-Roll Plate Bending Machine Electronically controlled, hydraulic 3-roll plate bending machine Technical Data: Number of rolls: Three Side roll geometry: Variable Working width: 3,050 mm Top roll diameter: 620 mm Side roll diameter: 550 mm Pressing force against top roll: 630 tonnes Working pressure at rated force: 250 bar Guaranteed installed power: 55 kW (75 HP) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600 mm Width: 3,700 mm Height: 3,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full width): 75 mm Pre-bending capacity (full width): 48 mm Hedpfeiivgyjx Ah Defn From pipe diameter: 3,100 mm Rolling capacity (full width): 55 mm Pre-bending capacity (full width): 40 mm From pipe diameter: 805 mm Standard Equipment: Variable geometry with linear guides for roll movement Extra-long drop-end bearing for increased frame stability Electronic Parallelism System (EPS) Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hi-tech hydraulic and electrical package Simultaneous rotation and roll movement Safety pull cord with emergency stop and CE certification Centralised lubrication Water cooling for hydraulic system Cone bending device Prepared for retrofit of supports and roller tables FACCIN Advantage Package AP