Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 Baler Year 2008-2009, Price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive motor output: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding type: wire Pressable materials: film, mixed paper, cardboard, die-cut waste, textiles, big bags, EPS HSM V-Press 860 Plus Baler, Year 2013-2015, Price: €7,500 HSM V-Press 860 L Baler, Year 2015, Price: €9,000 HSM V-Press 860 Plus Baler, Year 2019, Price: €9,000 HSM V-Press 860 Plus Baler, Year 2024, Price: €10,000 HSM V-Press 860 New, Showroom Model, Year 2020, Price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H in mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H in mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B Baler, Year 2020, Price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400V/50Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: Manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Nodjra Rbgopfx Advjcp Binding type: wire Pressable materials: film, cardboard Idle cycle time: 25 s

Stanje: pripravljen za uporabo (rabljen), Model balirnega stiskalnika HSM V-press 1160 plus Pritisk (kN): 532 Teža bale, odvisno od materiala, do 550 kg Najv. dimenzija bale (mm): 1200x1100x1000-1200 Ncodpfx Adjra Nyuevsp Dimenzije D x Š x V (mm): 1780x1150x2985 Moč (kW): 7,5 Teža (kg): 2300 Letnik 2007–2010 cena 5800 EUR Letnik 2011–2013 cena 6000 EUR LETNIK 2018 STANE 6000 EUR Na voljo imamo tudi balirne stiskalnike HSM v press 1160 max letnik 2014–2015

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, Technical data: Press force: 1,000 kN Specific press force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Maximum bale weight: 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with associated shaft covers - 1 support structure and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500 kg soft wire coils - 10 wire reel trolleys Ncsdsygud Aopfx Advop - 1 multi-control system for the baler - Full set of design documentation and maintenance history - Maintained and serviced by the manufacturer Commissioning upon request. Weight: 33,000 kg Binding type: Wire Processable materials: Plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The system is operational and can be inspected while running. The machine will be dismantled on 16.02. and can be inspected at our premises thereafter. Available immediately!

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2017, Leto izdelave 2017 Ncjdsytf Avopfx Advep 25 m³ brez vrat

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Právě dorazilo Lis na balíky Dixi 80 SLD, s výklopným a zdvihacím zařízením, poloautomatický, rok výroby 2020 Výrobce: Dixi Typ: Dixi 80 SLD Rok výroby: 2020 Příkon: 11 kW, 400 V / 32 A Plnicí otvor: 1 040 x 1 110 mm (š x d) Lisovací síla: 80 t Lisovací cyklus: cca 35 s Kapacita: cca 1 000 kg/h Velikost balíku: 1 120 x 1 120 x 1 200 mm (š x v x d) Hmotnost balíku: cca 500–600 kg Vázání: 4násobné, ruční Rozměry stroje: cca 4 320 x 1 830 x 2 620 mm (d x š x v) Hmotnost stroje: cca 8 000 kg Materiály: papír, karton, fólie Ncedpfx Adsygk Hgovep Upozornění: Veškeré technické údaje vycházejí z informací výrobce. Neručíme za správnost uvedených údajů ani možné chyby. Nabídka je nezávazná, s výhradou předchozího prodeje a může být kdykoliv stažena. Prohlídka možná po dohodě. Prodej probíhá pouze proti platbě předem, ze závodu a bez záruky či garance.

Stanje: dober (rabljeno), Bramidan B 20 Baler Bale dimensions - WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of bindings: 4 Year of manufacture: 2012 - 2017 Bramidan X25 – Efficient Waste Baler Suitable for various materials, including stretchable ones Large, wide chamber Locks to prevent expansion of material inside the chamber Short cycle time allows quick disposal of waste TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS polystyrene Steel cans Nedpev Aku Sjfx Advscp BALE DIMENSIONS: 1200 x 800 x 800 mm PRESSING FORCE: 25 t BALE WEIGHT: Cardboard (kg): 200-300 Plastic foil (kg): 250-350 Year of manufacture: 2012-2018 Price: 5,500 EUR ORWAK 3410 For paper, foil, cans, PET bottles. Pressing force: 24 tons Power supply: 3-phase, 400 V, 50 Hz Bale dimensions: Width: 1200 mm Depth: 800 mm Height: 1000 mm Bale weight: up to 400 kg Year of manufacture: 2010-2013 Price: 4,000 EUR

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9484, Husmann izmenljivi zabojnik Ncjdpswcdr Nefx Advsp Razkladalna vrata / drsni zapah predelan za L&M KBW-TS

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Ludden & Mennekes swap body container Specifically designed for paper/cardboard Compatible with Ludden & Mennekes KBW stationary baler. This container features an opening at the container’s interface (front side). Paper and cardboard are pressed into the container from the front. As the container is conically shaped towards the discharge door, the material can be emptied very easily. In contrast to 'standard' swap body containers, unloading is thus much simpler. Ncsdpfx Ajwcdtgsdvsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 141 h, Funkcionalnost: popolnoma funkcionalen, Presse verticale à balles HSM V-Press 860 plus B, année de fabrication 2019 Données techniques : Fabricant : HSM Modèle : V-Press 860 plus B Année de fabrication : 2019 Heures de fonctionnement : 141 Force de pressage : 60 t Puissance motrice : 4 kW Ouverture de remplissage : 1500 x 651 mm Hauteur de remplissage : 1129 mm Dimensions des balles : env. 1500 x 1200 x 780 mm Poids des balles : 550 kg Liaison : manuelle Temps de cycle théorique à vide : 25 s Performance théorique de pressage : 32,5 m³/h Dimensions : 2099 x 1245 x 2985 mm (L x P x H) Poids : 2340 kg Matériaux : film, papier, cartons Nodpfsyr Dp Eex Advjcp Veuillez noter : Toutes les données techniques se basent sur les informations du fabricant. Nous déclinons toute responsabilité quant aux informations fournies ainsi que pour d'éventuelles erreurs. Offres sans engagement, sous réserve de vente préalable ou de retrait à tout moment. Visites possibles sur rendez-vous. Vente en l'état, sans garantie ni assurance. Nos conditions de paiement : 100% paiement anticipé.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 1.200 mm, višina bale: 750 mm, teža bale: 450 kg, Oprema: dokumentacija / priročnik, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The unit has undergone service and maintenance by an authorized HSM Service Center with a branch in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wire. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 – 1200 mm Dimensions (L x W x H): 6661 x 3994 x 2583 mm Machine weight: 10.2 t Pressed material: film, mixed paper, cardboard, punching waste Bale tying: 4-fold wire binding We also have other balers in stock. Transport costs depend on weight, volume, and especially distance. For inquiries, the following information is required: delivery address (postal code and town/city). For further details, a telephone contact is necessary. Therefore, please inquire about transport costs and other shipping methods by contacting us by phone. Our contact details can be found in the seller's legal notice. Nedpoyn Hk Rjfx Advjcp We sell and export worldwide and, thanks to our large storage capacity, can deliver larger quantities flexibly and quickly. We issue intra-community invoices – without VAT. Opening hours Mon-Fri: 8:00–16:00 Sat: closed

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Ncsdpfx Adoyxcfaovsp Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm × 65 cm Condition: Excellent! Checked for full functionality. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote without obligation. With FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you have the right machine quickly. You are very welcome to visit us and inspect the machines on site. Our address: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can dedicate time to inform you thoroughly and show you the right machines. We are happy to assist you further! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm × 65 cm Ncsdpjyxcdvofx Advjp Condition: Very good! Fully tested and operational. FLITS Rental & Sales service: With every machine we supply one bundle of tying wire (120 wires). Need more tying wire bundles? Please request a non-binding quote. Choose FLITS Rental & Sales for speed, transparency and reliability. We think along with you, respond immediately, and ensure you have the right machine quickly. You are very welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to inform you thoroughly and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 386, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.110 mm, dolžina polnilne odprtine: 1.050 mm, širina bale: 1.050 mm, višina bale: 730 mm, teža bale: 425 kg, skupna širina: 2.100 mm, skupna višina: 3.100 mm, skupna dolžina: 5.000 mm, skupna masa: 6.800 kg, transportna višina: 2.400 mm, moč: 22 kW (29,91 KM), Stiskalnica je bila zamenjana z večjo. Do demontaže je bila normalno v uporabi. Funkcija je bila popolnoma zagotovljena. Stiskalnica stoji na naslovu 09212 Limbach-Oberfrohna, Chemnitzer Str. 96. Ncjdoypb Awopfx Advop

Stanje: rabljeno, Leto izdelave: 2005, skupna širina: 1.250 mm, skupna višina: 2.000 mm, skupna dolžina: 4.000 mm, Lastna teža: 5.000 kg Cena: Po dogovoru - Leto izdelave: 2005 - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Serijska številka: 310 - Transportne mere: 4000mm x 1250mm x 2000mm (d x š x v) Nsdpfx Adoyr H S Aovscp - Transportna teža [kg]: 5000kg - Transportni paketi [kos]: 1 Finančne informacije: DDV: Navedena cena je brez DDV DDV/diferencirana obdavčitev: DDV je odbiten za podjetja Dostava in odkup sta možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2005, skupna širina: 1.250 mm, skupna višina: 2.000 mm, skupna dolžina: 4.000 mm, Lastna teža: 5.000 kg Cena: Na zahtevo - Leto proizvodnje: 2005 - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Serijska številka: 309 - Transportne mere: 4000 mm x 1250 mm x 2000 mm (d x š x v) - Transportna teža [kg]: 5000 kg Ncedpfxjyr H Svo Advep - Transportni paketi [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je za podjetja odbiten Dostava in odkup možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 433 h, Funkcionalnost: popolnoma funkcionalen, Vertikalna balirna stiskalnica HSM V-Press 860 plus, letnik 2019 Tehnični podatki: Proizvajalec: HSM Tip: V-Press 860 plus Leto izdelave: 2019 Delovne ure: 433 Pritisk stiskanja: 60 t Pogonska moč: 4 kW Polnilna odprtina: 1195 x 645 mm Višina polnjenja: 1114 mm Velikost bale: pribl. 1200 x 1200 x 780 mm Teža bale: 480 kg Vezanje: ročno Teoretični prosti takt: 25 s Teoretična zmogljivost stiskanja: 12 m³/h Ncedpeyrngnofx Advop Dimenzije: 1800 x 1253 x 2990 mm (ŠxGxV) Teža stroja: 2213 kg Obdelovani materiali: folija, papir, karton, izseki, tekstil, big bag vreče, stiropor Opomba: Stiskalnica je v zelo dobrem stanju. Prosimo, upoštevajte: Vsi tehnični podatki temeljijo na informacijah proizvajalca. Za morebitne napake ali netočnosti ne prevzemamo nobene odgovornosti. Ponudbe so nezavezujoče, pravica do prodaje vmes pridržana, ponudba se lahko kadarkoli umakne. Ogled je možen po predhodnem dogovoru. Prodaja poteka na lokaciji stroja, brez garancije in jamstva. Naši plačilni pogoji: 100% predplačilo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 311 h, Funkcionalnost: popolnoma funkcionalen, Vertikalna balirna stiskalnica HSM V-Press 860 plus, letnik 2019 Tehnični podatki: Proizvajalec: HSM Tip: V-Press 860 plus Nodpfxeyrnfke Advscp Letnik izdelave: 2019 Delovne ure: 311 Tlačna sila: 60 t Pogonska moč: 4 kW Dimenzije polnilne odprtine: 1195 x 645 mm Višina polnjenja: 1114 mm Velikost bale: pribl. 1200 x 1200 x 780 mm Teža bale: 480 kg Vezanje: ročno Teoretičen čas cikla v prostem teku: 25 s Teoretična zmogljivost stiskanja: 12 m³/h Mere: 1800 x 1253 x 2990 mm (ŠxGxV) Teža: 2213 kg Obdelovani materiali: folija, papir, karton, izseki, oblačila, big bagi, stiropor Opomba: Stiskalnica je v zelo dobrem stanju. Prosimo upoštevajte: Vsi tehnični podatki temeljijo na navedbah proizvajalca. Za navedene podatke ter morebitne napake ne prevzemamo nobene odgovornosti. Ponudba je nezavezujoča, možnost predhodne prodaje in preklica ponudbe kadarkoli. Ogled možen po predhodnem dogovoru. Prodaja se izvaja iz lokacije, brez garancije in jamstva. Način plačila: 100 % predplačilo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, Vertikalna balirna preša HSM V-Press 860 plus B, letnik 2019 Tehnični podatki: Proizvajalec: HSM Tip: V-Press 860 plus B Letnik: 2019 Delovne ure: 119 Pritisk: 60 t Pogonska moč: 4 kW Polnilna odprtina: 1500 x 651 mm Višina polnjenja: 1129 mm Velikost bale: pribl. 1500 x 1200 x 780 mm Teža bale: 550 kg Vezava: ročna Teor. cikel v prostem teku: 25 s Teor. zmogljivost stiskanja: 32,5 m³/h Ncedpfoyrfl Isx Advop Dimenzije: 2099 x 1245 x 2985 mm (ŠxGxV) Teža: 2340 kg Materiali: folija, papir, karton Opomba: Preša je v zelo dobrem stanju. Prosimo, upoštevajte: Vsi tehnični podatki temeljijo na navedbah proizvajalca. Za navedene podatke in morebitne napake ne prevzemamo odgovornosti. Ponudba ni zavezujoča, vmesna prodaja in preklic je možen kadarkoli. Ogled je mogoč po dogovoru. Prodaja poteka iz skladišča, brez garancije in jamstva. Naš plačilni pogoj: 100% predplačilo.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The BTS-MF40 is the ideal baler for compacting your loose cardboard and film waste into a bale of up to 40 kg. The baler impresses with its simple and safe operation, making it optimal for small material volumes and for producing compact, easy-to-handle bales. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and properly return the material to the recycling loop. Pressing force: 2 tonnes Bale weight: up to 40 kg (material dependent) Bale size: 600 H (var.) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Feed opening: 522 W x 490 H mm Press cycle time: 20 seconds Motor: 1.5 kW, 13 amps Power supply: 220 – 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for bale removal Retainers to reduce material spring-back Holder for strapping bands A quality product "Made in Europe" Ncsdpsvahudjfx Advop Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Light recyclables Additional options: Annual maintenance with UVV inspection Machine colour as per RAL Can pressing insert Automatic control with automated press cycle Strapping bands Power supply 380 – 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recyclables press, waste compactor, rubbish press, residual waste compactor

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The BTS-MF40 is the ideal baler for compacting your loose cardboard and film waste into a bale of up to 40 kg. The baler stands out for its simple and safe operation, making it perfect for low material volumes and for producing compact, easy-to-handle bales. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly cut your disposal costs, and return the material properly to the recycling process. Pressing force: 2 tons Bale weight: up to 40 kg (material dependent) Nedpfx Aeu Iwgvjdvocp Bale size: 600 H (var.) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Feed opening: 522 W x 490 H mm Pressing time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for bale removal Retainer to reduce material spring-back Holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting: Cardboard Plastic film Cans and light metal containers Canisters and lightweight plastic containers Textiles Light recyclables Additional options: Annual maintenance with safety inspection (UVV) Custom machine colour (RAL) Can press insert AUTO control with automatic press cycle Strapping bands Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, compactor, recycling press, waste compactor, refuse baler

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-1100 waste compactor is ideal for compacting your 1100 L waste and recycling bins. It enables you to easily and safely compress bulky waste and recyclable materials to a minimum of their original size. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 75%, significantly reducing your disposal costs and also creating a safer and cleaner working environment. Pressing force: 3.5 tons Compaction: up to 75% (depending on material) Machine dimensions: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Press cycle time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly and safe two-hand lever operation Optimized use of waste bins Reduces the number of waste bins required No need to enter the waste container Reduces the frequency of waste collection A quality product 'Made in Europe' Nedpjn Argijfx Advjcp Suitable for compacting: - Residual waste - Recyclables - Paper and cardboard - Green waste - Light recyclables Additional options: - Annual maintenance with UVV inspection - Machine color available in any RAL shade - Machine available galvanized - Compaction plate for 660 and 770 L bins - Power supply 380 - 400 V (three phase) Baling press, paper press, waste paper press, cardboard baler, cardboard press, film press, paper baler, waste baling press, waste press, recyclable material press, waste compactor, waste press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-240 waste compactor is ideal for compacting your 240 L waste and recycling bins. It allows bulky waste and recyclables to be compacted quickly and safely down to a minimum of their original volume. Nsdpfx Adsbqg Rfovjcp By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 75%, significantly lower your disposal costs, and also create a safe and clean working environment. Pressing force: 2 tons Compaction: up to 75% (depending on material) Machine dimensions: 2360 H x 780 W x 780 D mm Machine weight: 234 kg Transport height: 2360 / 1754 mm (as required) Pressing time: 20 seconds Motor: 1.5 kW, 13 amps Power supply: 220 - 240 V (single phase) Noise emission: 68 dB User-friendly lever operation Optimal utilisation of waste containers Reduces the number of bins needed No need to enter waste containers Decreases waste collection frequency A quality product "Made in Europe" Suitable for compacting: Residual waste Recyclables Paper and cardboard Green waste Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL AUTO control with automatic pressing cycle and E-stop with key Press insert for refuse sacks Bin press, waste compactor, refuse press, residual waste press, baler, paper press, cardboard press, film press, waste baler, value material press, refuse compactor, bin compactor, residual waste compactor.

Stanje: rabljeno, Leto izdelave: 2005, skupna širina: 1.300 mm, skupna višina: 3.850 mm, skupna dolžina: 2.200 mm, Cena: Na zahtevo Njdjyrtcuepfx Advjcp - Leto izdelave: 2005 - Dokumentacija na voljo: Ne - Prisotna CE-oznaka: Da - Prisoten CE-certifikat: Ne - Serijska številka: 308 - Transportne mere: 2200 mm x 1300 mm x 3850 mm (d x š x v) - Prevozni paketi [kos]: 1 Finančne informacije DDV: Prikazana cena je brez DDV DDV/obdavčitev razlike: DDV je odbit za podjetnike Dostava in menjava možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS Drum Press auto is ideally suited for compacting steel drums from 30 to 220 liters, but can also easily compress plastic and cardboard drums. In many cases, the compressed recyclables can even be remarketed afterward. This drum press is especially notable for its reliable and easy operation. By compacting these waste or recyclable materials, you achieve a volume reduction of up to 90%, significantly lowering your disposal costs and returning the material properly into the recycling cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3 phase) Ncjdpfx Ajc Spguedvep Noise level: 68 dB AUTO control with automatic press cycle 30-liter drip tray with drain valve Press ram with spikes for venting drums during the pressing process Maximum safety standards thanks to a fully enclosed housing Suitable for 30 to 220-liter steel tight-head drums, plastic drums, and cardboard drums A quality product “Made in Europe” Suitable for compacting: Steel drums Plastic drums Cardboard drums Fiber drums and paper drums Optional features: Annual maintenance with UVV inspection Machine color according to RAL Press insert for cans, oil and air filters

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS drum press is ideally suited for compacting 30 to 220 litre steel drums, but it can also compress plastic and cardboard drums effortlessly. In many cases, these compacted recyclable materials can even be remarketed. The drum press is particularly distinguished by its reliability and ease of operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the material to the recycling cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Ncsdpfxozdr To Advep Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW, 32 amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever operation 30-litre drip tray with drain tap Platen with spikes for venting drums during compression Maximum safety standards thanks to fully encapsulated housing Suitable for 30 to 220 litre tight-head steel barrels, plastic drums and cardboard drums A quality product "Made in Europe" Suitable for compacting: Steel drums Plastic drums Cardboard drums Fibre drums and paper drums Additional options: Annual maintenance with safety inspection (UVV) Custom machine colour according to RAL AUTO control with automatic pressing cycle Press insert for cans, oil and air filters Drum press for steel drums / plastic drums