Unicontrol 10 nakup rabljenega (30.079)

Stanje: delavnici obnovljeno (rabljeno), Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW Psdoxpi Duspfx Altsgp spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Pgodjvwdmwjpfx Altep

Stanje: rabljeno, Slotted spindle, 2 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus Weinig Unicontrol 10 NC window production line, optionally with extensive tooling ----- Optionally available (with additional surcharge): IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors Technical manufacturer's description: ----- Pos. 1: Weinig Unicontrol 10 NC window production line ----- Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Podpfx Ajzawizeltjgp Radial adjustment pneumatically to 8 positions for edge rounding from above Horizontal rounding unit, bottom ----- Axial adjustment mechanically coupled to cross-cut saw 1st tenon and slot spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment via NC axis Home position below table: 5–10 mm Radial adjustment: fixed 2nd tenon and slot spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial adjustment via NC axis Radial adjustment via NC axis Home position below table: 5–10 mm 1st profile spindle (climb and counter climb) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Horizontal top profile milling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 130 mm Adjustment pneumatically to 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Vertical profile milling unit right, machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Adjustment pneumatically to 8 axial and radial positions Further accessories -----...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: Pgsdpfx Alsfzzhyjtop - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: rabljeno, Aggregate 10 Spindle diameter 40 and 50 mm Motor: 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) angle device for the production of windows, elements, and doors. Suitable for frame production, series production, or single-piece manufacturing with 2 tenoning and mortising spindles including Oertli tool set. - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profiling milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling milling unit, vertical right, 3 kW 9. Profiling milling unit, vertical right from above, 3 kW 10. Profiling milling unit, horizontal from below, NC axis, 3 kW - Double piece package - Rebating package with rebating carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Edge rounding unit from below with crosscut saw - Glazing bar support strip Podpev Ag Tdjfx Altogp - Incl. extraction pipe system - Incl. Oertli tool set - Further technical data and tool drawings available on request.

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 10, suitable for spare parts or for building a new control cabinet. Contents include, among others: - Siemens Simatic S5 Podpfxerrk I He Altegp - Siemens EMG 45

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Pgedpexmr N Iofx Altjp Interval-controlled sash support Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 100 mm, pomik po osi Z: 142 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: WS 400-20, CNC machining centre from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It is equipped with a powerful crosscut saw with spindle speeds of up to 3,000 rpm and a tenoning spindle motor output of 15 kW. If you are looking for high-quality CNC machining capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm Pjdjy Ixpaopfx Altjgp • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Crosscut saw motor power: 3.7 kW • Crosscut saw spindle speed: 2,800–3,000 rpm • Max. tool diameter for crosscut saw: 400 mm • Crosscut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Max. tool diameter for tenoning spindle: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (cutting circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of top horizontal profiling unit: 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Max. tool diameter for horizontal profiling unit: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 83406, Obdelovalni center za okna Weinig Unicontrol 10, letnik izdelave 1998 Psdpfoy Sxlpox Altogp

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter • Feed unit (cross processing) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm Pgedpfox S Sk Ejx Altjp • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Pgedpfx Alstq U A Ietop

Stanje: novo, Leto izdelave: 2026, nosilnost: 10.000 kg, Stična dvigalna naprava s stebrom, nosilnost 10 ton, na voljo kot komplet ali posamezno Pogon na 2 straneh Stroj se prodaja kot komplet, sinhrono ali posamezno Naprava za obračanje/pozicioniranje Protec Syncrolift Dvojni steber, upravljanje na daljavo, brezžično in ročno Nastavitev stebra, 2-krat električna (doplačilo) Nosilnost 10.000 kg, 360° Minimalna delovna višina: 800 mm Maksimalna delovna višina: 1700 mm Hitrost: 0,5 vrt/min Premer pritrdilne plošče: 900 mm Psdpfswtq Dtex Altjgp Rotacijski pogon: 2 x 2,2 kW Navor: 18950 Nm Stroj je na voljo tudi posamezno kot enojni model (ceneje) Na zahtevo z fleksibilno prirobnico (kardanska prirobnica)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 137.000 mm, višina police: 5.000 mm, število vrst polic: 10, prosta razpetina: 3.300 mm, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 137.000 mm, dolžina opore: 3.300 mm, 2 enojne vrste paletnih regalov + 4 dvojne vrste paletnih regalov vsak 13,7 m dolg, 5 m visok, 1,1 m globok, vsaka 4 polja, širina polja 3,3 m, vsaka 3 nivoji prečk, nosilnost na prostor 3250 kg. - 50 okvirjev (RM5011 - RAL5019) vključno s talnimi ploščami, podložnim materialom in vijaki - 40 distančnikov/povezovalnikov za dvojne vrste (ZAbh20) - 200 talnih sider (ZZBA1210) - 240 posameznih prečk (T33135 - RAL2008) - 10 zaščit proti trku/odbojem (ZRS40901) - 10 tabel z nosilnostjo (BSMcP) Okvirji so privijačeni, ne predmontirani Psdozm Ek Eopfx Altsgp Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava brezplačno na gradbišče/mesto montaže - razklad s tovornjaka izvede kupec z lastno dvižno napravo - dostava po celotnem delu Zvezne republike Nemčije, razen otokov! - Dostave v države EU po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Prodam motorno reduktor Lenze GSN04-1NHAR s trifaznim motorjem Lenze/WEG DERA071-32, moči 0,37 kW. Naprava je v 100-odstotno delovnem stanju, preizkušena in pripravljena za uporabo. Tehnično stanje je zelo dobro. Vizualno ima normalne znake uporabe, ki izhajajo iz delovanja, kar je razvidno iz fotografij. Zaradi kompaktne konstrukcije in spiralnega prenosa je motorno reduktor idealen za pogon tekočih trakov, podajalnikov, proizvodnih strojev, pakirnih strojev, mešalnikov in številnih drugih industrijskih naprav. Tehnični podatki: Proizvajalec reduktorja: Lenze Model reduktorja: GSN04-1NHAR Proizvajalec motorja: Lenze / WEG Tip motorja: DERA071-32 Moč: 0,37 kW Napajanje: 3×220–240/380–415 V AC Frekvenca: 50 Hz Hitrost motorja: 1370 vrt/min Izhodna hitrost: 133 vrt/min Navor: 22,6 Nm Prestavno razmerje: i = 10 Stopnja zaščite: IP55 Razred izolacije: F Pedpfx Aoznclcsltegp Način delovanja: S1 Stanje: 100-odstotno delujoče – preizkušeno. Normalni znaki uporabe, vidni na ohišju. Prodaja se natančno v stanju, kot je prikazano na fotografijah.

Stanje: zelo dobro (rabljeno), Na prodaj je motor-reduktor Lenze s pužnim prenosom. Naprava je v 100-odstotnem delovnem stanju, preizkušena in pripravljena za uporabo. Tehnično stanje je zelo dobro, vidne so le običajne sledi uporabe, ki izhajajo iz delovanja. Idealno se prilega za pogon tekočih trakov, podajalnikov, industrijskih strojev, mešal in drugih naprav, ki zahtevajo zanesljiv pogon z visokim navorom. Tehnični podatki: Proizvajalec: Lenze Podpoznb Ivjfx Altsgp Tip motorja: DERA 071-22E Tip prenosa: GSN04-1NHAR Moč: 0,37 kW (50 Hz) Napajanje: 3×230/400 V Frekvenca: 50 Hz Število vrtljajev motorja: 1400 vrt/min Izhodna hitrost: 140 vrt/min Prenosno razmerje: i = 10 Navor: 22 Nm Stopnja zaščite: IP55 Razred izolacije: F Proizvajalec: Lenze, Avstrija Stanje: 100-odstotno delovno – preizkušeno. Običajne sledi uporabe. Prodaja se v enakem stanju, kot je prikazano na slikah.

Stanje: zelo dobro (rabljeno), Na prodaj je trifazni motor s freno SEW-Eurodrive RF32DT80K4BMG/HF/TF. Naprava je 100-odstotno delujoča, preizkušena in pripravljena za uporabo. Pred prodajo je bil motor temeljito pregledan in deluje brezhibno. Na ohišju so vidne običajne sledi uporabe in lokalne odrgnine barve, ki so prikazane na slikah. Te ne vplivajo na pravilno delovanje ali tehnične parametre naprave. Tehnični podatki: Proizvajalec: SEW-Eurodrive Tip: RF32DT80K4BMG/HF/TF Moč: 0,55 kW Napetost: 3×230/400 V AC, 50 Hz Število vrtljajev: 1360 vrt/min Navor motorja: 10 Nm Prestavna enota: RF32 Elektromagnetna zavora: 230 V AC Nazivni tok: 3,05 A (230 V Δ) / 1,76 A (400 V Y) Izkoristek (cos φ): 0,77 Stopnja zaščite: IP54 Pgjdpfxozna Tks Altep Razred izolacije: H Način delovanja: S1 Masa: 18,57 kg

Stanje: zelo dobro (rabljeno), Na prodaj je spiralni motorreduktor Lenze GSN04-1NHAR s trifaznim motorjem WEG AL71-4, moči 0,37 kW. Naprava je v celoti delujoča, preizkušena in pripravljena za uporabo. Motorreduktor je v dobrem tehničnem in vizualnem stanju. Vidne so le običajne sledi uporabe, ki izhajajo iz delovanja. Zaradi kompaktne in robustne konstrukcije je idealen za uporabo kot pogon v industrijskih strojih, transporterjih, proizvodnih linijah, napravah za pakiranje in avtomatskih sistemih. Serija GSN04 so kompaktni motorreduktorji, namenjeni za uporabo v aplikacijah, ki zahtevajo zanesljiv prenos pogona. Tehnični podatki: Proizvajalec reduktorja: Lenze Model reduktorja: GSN04-1NHAR Proizvajalec motorja: WEG Tip motorja: AL71-4 Moč: 0,37 kW Napetost: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Hitrost motorja: 1370 vrt/min Izhodna hitrost: 140 vrt/min Prestavno razmerje: i = 10 Izhodni navor: 22 Nm Stopnja zaščite: IP55 Pgedpfxezmyybj Altop Razred izolacije: F Način delovanja: S1 (neprekinjeno delovanje) Obseg prodaje vključuje natančno to, kar je prikazano na fotografijah.

Stanje: zelo dobro (rabljeno), KATALOGNA ŠTEVILKA 6969 TEHNIČNI PODATKI Krožna žaga: - največji premer žaginega lista: 300 mm Podpfozc Iv Dex Altsgp - vreteno: 30 mm - največja višina reza: 60 mm - list nastavljiv naprej/nazaj - motor: 2,4 kW Rezkar: vreteno za čepanje: - premer vretena: 40 mm - delovna višina vretena: 190 mm - blokirano vreteno - največji premer rezkarja: 360 mm - motor: 7,5 kW - 2 hitrosti vrtenja - vpenjanje materiala - bočni pomični voziček nastavljiv gor/dol, naprej/nazaj - kotnik - izvlečna podpora iz mize - ročni pomik vozička - premer sesalnih priključkov: 80 mm, 160 mm - mere d/š/v: 1910 x 1960 x 1800 mm - teža: 830 kg – proizvedeno na Poljskem – kompletna tehnična dokumentacija (DTR) – zgornja nadzorna plošča – rabljeni stroj za čepanje, zelo dobro ohranjen Neto cena: 13.900 PLN Neto cena: 3.300 EUR Neto cena izračunana glede na tečaj 4,2 PLN/EUR (ob večjih valutnih nihanjih se lahko cena spremeni)

Stanje: zelo dobro (rabljeno), Ponujam na prodajo profesionalni RF signalni generator Agilent 83651B Synthesized Sweeper, namenjen laboratorijski, raziskovalni in razvojni ter servisni uporabi. Naprava se uporablja pri testiranju mikrovalnih in telekomunikacijskih sistemov ter pri merjenjih visokih frekvenc. Model 83651B ponuja širok frekvenčni razpon od 10 MHz do 50 GHz, zaradi česar je idealen za laboratorije, ki se ukvarjajo z elektroniko, mikrovalno tehniko in telekomunikacijami. Naprava je opremljena s številnimi merilnimi in upravljalnimi priključki, vmesnikom GPIB, referenčnimi vhodi in izhodi 10 MHz ter možnostjo povezave z drugimi merilnimi napravami. Naprava izvira iz demontaže laboratorija. Ni bila preizkušena in se prodaja kot rabljena naprava. Vizualno stanje je prikazano na priloženih fotografijah. Pgedpfezl H Ddsx Altsp Tehnični podatki Proizvajalec: Agilent Technologies Model: 83651B Tip: Synthesized Sweeper / RF signalni generator Frekvenčni razpon: 10 MHz – 50 GHz Napajanje: 230 V AC, 48–66 Hz Komunikacijski vmesnik: GPIB (IEEE-488) Referenčni vhod in izhod 10 MHz Upravljalni vhodi in izhodi (Trigger, Sweep, FM, AM, Pulse) Uporaba: laboratoriji, raziskave in razvoj, telekomunikacije, mikrovalna tehnika, merjenje RF Stanje Rabljena naprava. Ni bila preizkušana. Vizualno stanje je dobro, ima običajne sledi uporabe, ki so vidne na fotografijah. Prodaja se v stanju, kot je prikazano na fotografijah.

Stanje: dober (rabljeno), Perfecta SL-10 P, dvigalo za zvitke papirja s stransko zaščito. Naprava je v odličnem tehničnem in vizualnem stanju. Praktično nerabljena. Pedpfx Aljzlag Sjtjgp Opremljena z nastavljivo stransko zaščito za enostavno zlaganje. Moderna zasnova. Nosilnost: 1000 kg Velikost plošče: 900 x 1300 mm Napetost: 380 V Teža: 650 kg Dvigalo je zelo enostavno za premikanje, nameščeno na kolesih. Nadzorna plošča je nastavljiva v levo in desno. Dvižni mehanizem se upravlja s fotočlenom. Tih hidravlična enota.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 11/2024, Leto izdelave: 2024, Primerno gradbeno gradivo: beton. Pgedpfxjzfy Nyo Altop Davek na dodano vrednost/davčni sistem na podlagi razlike: davek na dodano vrednost je odbitljiv. Za dodatne informacije se obrnite na Haruna Cevika, Jamilo Azzi, Henrija Omeragica ali Denisa Omeragica.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Complete microbrewery for sale: Brewhouse 10 HL: High-quality Schulz brewing kettle, double-walled with chocolate process, lauter tun and whirlpool, complete piping, hoses. Mash automation with switchgear cabinets, control for hot water heating, malt mill, small equipment. Fermentation cellar: Wort cooler, ice water tank, 5 open fermentation tanks 10 HL, 5 storage tanks 20 HL, 3 dispensing tanks 10 HL. Wort pump, hoses, temperature control. Kieselguhr filter, yeast pan. Keg cellar: High-quality KEG cleaner with Siemens PLC, steam generator. Bottling cellar: Fully automatic inline bottle filler (8 heads), soft wheel, round bottle washer. Pjdpfx Aljf Ni Rvstogp Lots of accessories, small parts, hoses etc. Dismantling not included, cranes and lifting gear available.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, STROJ ZA RAVNO BRUŠENJE STEKLA Pgodpfx Aezgvl Holtjp

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, Stebrna dvižna in vrtljiva naprava s nosilnostjo 10 ton, na voljo kot set ali posamično. Pogon na obeh straneh. Stroj se ponuja kot sinhroniziran set ali posamično. Protec obračalna naprava / pozicioner Syncrolift. Dvojni steber, ročni daljinski upravljalnik brezžični in ročni. Nastavitev stebrov 2x električno prestavljiva. Nosilnost 10.000 kg, 360°. Minimalna delovna višina: 800 mm. Maksimalna delovna višina: 1700 mm. Hitrost 0,5 obr/min. Premer vpenjalne plošče: 900 mm. Vrtljivi pogon: 2 x 2,2 kW. Navor: 18.950 Nm. Stroj je na voljo tudi samostojno kot Mono model (cenovno ugodnejši). Po želji z zglobno prirobnico (kardanska prirobnica). Pgodpfx Aswtxxrjltjp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, nosilnost: 10.000 kg, Special price: 6 months used, as new, with warranty. Self-centering complete set, dual drive, synchronous operation. Includes hand remote control with digital display and foot remote control. Suitable for diameters from 300 mm to 3500 mm. Drive roller diameter: 300 mm. Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm. Infinitely variable speed: 200 - 1200 mm/min. Pgsdpew D Rhaofx Altop Motor: AC 380 V.