Unicontrol 10 nakup rabljenega (71.174)

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Takoj na voljo na lokaciji: Hidravlične škarje za pločevino Hera Tip TK 3000 / 10 Kedpfxjx Icbgo Ah Ajfa Letnik 1998, zelo malo delujoča (kot nova) Motoriziran zadnji naslon Krmljeni zadnji naslon 1000 mm Krmiljenje Siemens Simatic CP 7 Dolžina reza 3050 mm Debelina materiala do 10 mm Pogon 15 kW Teža 8 t Cena 13.500,— EUR + DDV na lokaciji

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good and well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 cavities and 10 heating modules. Operates with a variety of bottle sizes and designs from 0.25 to 3 liters. Two-stage PET stretch blow molding machines from Sidel require pre-manufactured preforms to be fed into the machine. Separating the processes for producing bottles and preforms allows for production optimization, greater operational flexibility, and provides a higher production capacity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom of support ring) Minimum ID of neck: 19 mm Maximum OD of neck: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle capacity: 0.25 – 3 liters TYPICAL PREFORM WEIGHTS (for still and carbonated liquids) 0.25 liter bottle: 14-20 grams 0.50 liter bottle: 20-33 grams 1.00 liter bottle: 26-40 grams 1.50 liter bottle: 35-51 grams 2.00 liter bottle: 44-58 grams 3.00 liter bottle: 68-84 grams BLOW WHEEL Height: 3.5 meters Number of cavities: 6 Clamping force: 10 tons Item height (below neck) at discharge: approx. 1.4 meters Machine DC drive motor power: 4 kW Kfedpfsg Ailcjx Ah Asa HEATING UNIT Height: 2 meters Number of oven heaters: 10 Number of heating zones per module: 8 Maximum power: 170 kW ELECTRICAL REQUIREMENTS Maximum supplied power: 200 kW Average consumption: 100–150 kWh (varies with bottle produced) COMPRESSED AIR Available supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies with bottle produced) Blow pressure – Standard base: up to 25 bar Blow throughput – Standard base: 110–550 Nm3/h Blow pressure – Petaloid base: up to 35 bar Blow throughput – Petaloid base: 155–770 Nm3/h CHILLED WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 m3/h Heat dissipation: up to 16,000 kcal/h WEIGHT Blow wheel with molds: 8 tons Heating unit: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING UNIT The preforms are transported with the necks facing upward to the heating unit. This module ensures that preforms are rotated before passing neck-down in front of the heating elements, and again afterward. During the heating phase, the preforms are rotated and the necks are shielded from heat to optimize thermal distribution without distorting the neck. Heating is performed via 10 heating modules. Each module can accommodate up to 8 horizontally-stacked IR lamps, with air-cooled ends. The heating output of the 8 zones—matching the 8 lamp rows—is adjustable to optimize the temperature profile. These zones are regulated across all SBO models. After heating, an IR camera monitors preform temperature, enabling automatic adjustment of the controlled zones to maintain the required temperature at all times.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 25 m/min, največja debelina roba: 3 mm, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min Kedpfx Ajxw T H Neh Aofa MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Milling Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE certification

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 9.000 kg, največja višina reza: 1.200 mm, največja širina rezanja: 1.100 mm, premer valja: 1.400 mm, skupna širina: 2.100 mm, skupna dolžina: 2.400 mm, vhodna napetost: 220 V, dolžina tračnega lista: 10.450 mm, širina tračne žage: 206 mm, moč: 90 kW (122,37 KM), lastna masa: 19.000 kg, hitrost rezanja: 40.000 mm/min, Oprema: kabina, Prodamo celotno žagalno linijo z vertikalno tračno žago VTZ 1400 PLUS proizvajalca Mebor. Ponudba vsebuje: - Vertikalna tračna žaga VTZ 1400 PLUS proizvajalca Mebor Kedpfexq Rgyex Ah Ajfa - Robusten transporter za hlodovino z nakladalnimi rokami - Freza za hlode - kanter BM900 proizvajalca Mebor - Kabino za operaterja vertikalne tračne žage - Valjčne in verižne transporterje - Linijo za robljenje VR800 S proizvajalca Mebor s servo vodenim, visokohitrostnim pozcioniranjem krožnih žag - Dvoosno večlistno krožno žago VC 900 D proizvajalca Mebor - Linijo za odpadke - Sekirasti drobilec odpadkov TH200/500/3 proizvajalca Rudnick & Enners - Linija za sortiranje 47-14 proizvajalca Holzmatic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 2006 CIMC 40FT FLATRACK FLUSH FOLDING Zložljiv, mogoče zlagati Kfedpfsx I R E Tox Ah Aea Lastna teža: 5.100 kg Največja nosilnost: 39.800 kg Največja bruto masa: 50.000 kg CSC: 12/2027 = Dodatne informacije = Leto izdelave: dec. 2006 Modelno leto: 2006 Lastna teža: 5.100 kg Nosilnost: 39.800 kg Dovoljena skupna masa: 44.900 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij kontaktirajte Arne Honingh.

Stanje: rabljeno, prevoženi kilometri: 845.000 km, moč: 338 kW (459,55 KM), konfiguracija osi: 4x2, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, meglenke, tempomat, = Dodatne možnosti in oprema = Kodpfxewc Ukcj Ah Asfa - 12-voltna vtičnica - Daljinsko centralno zaklepanje - Nizka raven hrupa - Omejevalnik hitrosti - Sredinski naslon za roke - Filter delcev - Radio - Kamera za vzvratno vožnjo - Senčnik = Dodatne informacije = Splošne informacije Število vrat: 2 Tehnične informacije Število valjev: 6 Prostornina motorja: 12.900 ccm Vrsta goriva: zemeljski plin Teže Lastna teža: 7.977 kg Nosilnost: 11.023 kg Dovoljena skupna masa: 19.000 kg Največja dovoljena vlečna masa: 41.882 kg Notranjost Število sedežev: 2 Stanje Število ključev: 3 (2 daljinska upravljalnika)

Stanje: novo, Leto izdelave: 2024, Panhans Mortising Machine Type: 116/10 - Maximum drilling depth: 145 mm - Maximum drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Colour: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight: approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Stationary table, smooth-running, mobile drilling motor Mobility unit for increased versatility Cast table 700 x 380 mm, thick-walled and heavily ribbed Smooth-running cross slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation via left and right adjustable side stops Drill motor output 1.3 kW / 1.8 HP with motor brake and practical tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling unit for row drilling with indexing roller 16, 22, 25, and 32 mm; high-precision machined indexing, fixing via spring-loaded indexing pin Plug-in frame stop with indexing pin for positions: centre, left, right Ksdpfx Aor Eli Tjh Ajfa CE-compliant GS-tested Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Širina tira ± 600 mm Skupna električna moč: 33 kW Toplotni priključek: NW32 2x5 plasti Maks. višina proizvoda: ± 100 mm Čas kuhanja min/maks: 4-40 min Kodox Af Hlepfx Ah Asfa Maks. temperatura: 200°C Avtomatsko dvigalo S sistemom za pranje traku Primerno za CIP čiščenje Primerno za parno injekcijo (ogrevanje, izkoristek proizvoda): 4-8 bar, priključek: NW 40 Vrtenje v levo

Stanje: rabljeno, številka stroja/vozila: 006064, Formatna krožna žaga: Stroj 1 in 2 Maksimalna višina panela: 85 mm Maksimalna podajalna hitrost: 26 m/min Kodpelw A D Tofx Ah Aofa Razdalja med kavlji: 1000 mm

Stanje: dober (rabljeno), Leto izdelave: 1996, Razdalja med žagami pri 90° maks.: 4000 mm Višina reza pri 90°: 200 mm Širina reza: 130 mm Kfjdogixvwopfx Ah Aja Moč: 5,1 kW Teža: 1260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 2008 CIMC 40FT FLATRACK FLUSH FOLDING Zložljiv, podložno zlaganju Lastna teža: 5.100 kg Maksimalna nosilnost: 39.800 kg Največja bruto teža: 50.000 kg CSC: 12/2027 = Dodatne informacije = Leto izdelave: avg. 2008 Modelno leto: 2008 Lastna teža: 5.100 kg Nosilnost: 39.800 kg Skupna dovoljena masa: 44.900 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij se obrnite na Arne Honingh. Kodpfx Ajx I R Egsh Aefa

Stanje: rabljeno, prevoženi kilometri: 210.000 km, moč: 206 kW (280,08 KM), prva registracija: 04/1987, vrsta goriva: dizel, lastna masa: 12.800 kg, največja dovoljena obremenitev: 11.200 kg, skupna masa: 24.000 kg, konfiguracija osi: 6x4, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: noben, vzmetenje: jeklo, število sedežev: 2, Oprema: hidravlika, kabina, servovolan, zapora diferenciala, Lokacija vozila: Bovenden, jeklena nadgradnja, 1x zračni sedež, 16-stopenjski menjalnik, pomožni pogon, zapora diferenciala. Nadgradnja: MEILLER jeklena prekucna keson približno 10 m³. Stanje števca kilometrov ni mogoče natančno določiti, ker je žica števca pretrgana. INFORMACIJE O DODATNI OPREMI BREZ JAMSTVA, pridržane so spremembe, vmesna prodaja in napake! Kfsdpfjxyxizjx Ah Aja

Stanje: rabljeno, Leto izdelave: 1996, Material width: 500 mm Coil weight: 2.5 t Material thickness: 0.2 - 3.0 mm Coil inner diameter: 480 - 530 mm Coil outer diameter: 1300 mm Material cross-section: 1000 mm² Number of straightening rollers: 10 Roller diameter: 80 mm Number of feeder rollers: 2 Feeder roller diameter: 120 mm Speed: 20 m/min Drive power: 4.0 + 1.1 kW Kfsdpfx Asvut Raeh Aja Straightening machine weight: 2.3 t Straightening machine dimensions (W x D x H): 1.4 x 2.2 x 2.0 m Decoiler weight: 0.95 t Decoiler dimensions (W x D x H): 1.5 x 1.5 x 1.95 m Straightening machine type: BRMS 4/500/10, with infinitely adjustable drive Decoiler type: BSH 3-500, with main motor with constant speed, disengageable auxiliary drive, pneumatic pressing device Loop control: light barrier Can be offered as-is, either commissioned or uncommissioned Video prior to dismantling available from seller

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Single-sided laser and PU edge banding machine incl. panel return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edgebanding material, rolls: 0.3 – 3 mm Edgebanding material, strips: 0.4 – 20 mm PC22 control Control system: Powertouch Units & Gluing Jointing milling unit S2 Automatic horizontal adjustment for jointing Automatic vertical adjustment for jointing Lasertec activation unit Performance Basic gluing unit A20, extension module Magazine upgrade to 6 rolls Horizontal free-standing roll support plate Continuously adjustable edge pressure shoe Suction device for strip separation Servo edge feeding Edge thickness measurement for roll material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Pressure zone wetting unit Separator agent spraying unit top/bottom End trimming unit HL86 chamfer/straight 0.22 kW servo Pneumatic adjustment for trimming motor Automatic adjustment for end stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-shape milling unit MF21 servo Separator agent spraying unit top Contour trimming unit FK31/20-cycle Powertrim Contour trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of: Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Solid wood edge gluing Automatic adjustment infeed fence 500 mm infeed extension Kfjdpfxjxgrfps Ah Aja Sliding carriage Scissor-type workpiece support table Extension for scissor-type table Workpiece thickness 8 mm instead of 12 mm Volt-free contact Flexible edge sequence management software Gap setup Panel return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 400 kVA transformatorska postaja, letnik 2019, postaja UK220-2.9X, transformator DOTUL400/10 letnik 2013, oljni transformator, 10kV ±2x2,5 %/400V, z VN vtikačnimi preboji AK, z NN porcelanskimi preboji, kazalni termometer. Kfodpfexzq Hbex Ah Aja

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Wet waste compactor, press container Bergmann MPB405 SN/10 suitable for skip loaders Kodpfx Ahjxql Dge Aefa 10 m³ usable volume inspected, serviced, fully operational Painting in desired RAL colour possible We are happy to provide an offer including delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 2008 CIMC 40FT FLATRACK FLUSH FOLDING Zložljiv, podložno zlaganju Lastna teža: 5.100 kg Maksimalna nosilnost: 39.800 kg Največja bruto teža: 50.000 kg CSC: 12/2027 = Dodatne informacije = Leto izdelave: avg. 2008 Modelno leto: 2008 Lastna teža: 5.100 kg Nosilnost: 39.800 kg Skupna dovoljena masa: 44.900 kg Kfjdpfx Aox I N U Teh Aoa Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij se obrnite na Arne Honingh.

Stanje: rabljeno, Leto izdelave: 2001, 2001 Ceccato RL60/10 Kompresor 10 barov Kfodpovzzr Ejfx Ah Aea

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: S4726-01-200300611, Pogon: kolesa Lastna teža: 2.216 kg Dvižna zmogljivost: 454 kg Delovna višina: 1.000 cm Transportne dimenzije (D x Š x V): 2,3x1,19x2,3 m Kfsdpfx Ahoxwi Ics Asa Za več informacij se obrnite na PFEIFER GROUP.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Električni pločevinasti valjar Leto izdelave: 2022 Pogon s frekvenčnim pretvornikom Kapaciteta: 1050 x 1,0 mm Kfsdpfx Ahsxx Av Ae Asa

Stanje: rabljeno, številka stroja/vozila: 006043, Max. panel width: 1250 mm Kfjdpfx Ahoii Sh Ns Asa Max. panel length: 2700 mm Conveyor length: 10,500 mm Return conveyor for edge banding machine: left

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 2008 CIMC 40FT FLATRACK FLUSH FOLDING Zložljiv, podložno zlaganju Lastna teža: 5.100 kg Maksimalna nosilnost: 39.800 kg Največja bruto teža: 50.000 kg CSC: 12/2027 = Dodatne informacije = Leto izdelave: avg. 2008 Modelno leto: 2008 Lastna teža: 5.100 kg Nosilnost: 39.800 kg Skupna dovoljena masa: 44.900 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Kedpfxsx It Hge Ah Aefa Za več informacij se obrnite na Arne Honingh.

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: S4726E-01-200300610, Pogon: kolesa Lastna teža: 2.216 kg Ksdpexwiz Ajfx Ah Asfa Dvižna zmogljivost: 454 kg Delovna višina: 1.000 cm Transportne dimenzije (D x Š x V): 2,3x1,19x2,3 m Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 200 h, številka stroja/vozila: MC180921-164, Pogon: kolesa Lastna teža: 2.655 kg Dvižna zmogljivost: 450 kg Kfsdpfstr Nahox Ah Aja Delovna višina: 1.000 cm Transportne dimenzije (D x Š x V): 2,48 x 1,15 x 2,32 m Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 163 h, številka stroja/vozila: MC180921-160, Pogon: kolesa Lastna teža: 2.655 kg Dvižna zmogljivost: 450 kg Delovna višina: 1.000 cm Transportne dimenzije (D x Š x V): 2,48 x 1,15 x 2,32 m Za več informacij se obrnite na PFEIFER GROUP. Kedpetr Nn Sjfx Ah Asfa