Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630213235, La machine est dans un état comme neuf ! Ncjdpfx Afjyqw Sqjgep Les données techniques proviennent du fabricant. Le vendeur ne peut en garantir l'exactitude ! DÉTAILS TECHNIQUES Force de pressage : 594 kN / 60 t Force de pressage spécifique : 45 N/cm² Temps de cycle (à vide) : 25 s Capacité théorique (à vide) : 32,5 m³/h Hauteur de remplissage : 1 115 mm Dimensions de l’ouverture de remplissage : 1 195 x 650 mm Dimensions des balles : 1 200 x 1 200 x 1 100 mm Poids maximal des balles : 550 kg Matériaux traités : film, papiers mixtes, carton, chutes de découpe DÉTAILS DE LA MACHINE Puissance d’entraînement : 4 kW Tension : 400 V Fréquence : 50 Hz Type de porte : porte coulissante Verrouillage de porte : hydraulique Type d’alimentation : manuelle Consommables : fil, fil à boucle Dimensions & poids Dimensions (L x l x H) : 1 780 x 1 568 x 2 985 mm Poids de la machine : 2 450 kg ÉQUIPEMENTS HSM TCS (TorsionControlSystem) pour la surveillance de l’inclinaison de la plaque de compression Démarrage automatique du cycle de pressage

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Nous vendons une presse à balles HSM, modèle V-Press 504, état quasi neuf, année 2023. La machine a uniquement servi pour des démonstrations et se trouve dans un état absolument neuf (voir photo). Données techniques et informations - Faible encombrement - Commande moderne par microprocesseur avec clavier à membrane et afficheur graphique à texte - Programmes sélectionnables pour carton et film - Trappe de remplissage et retrait des balles sécurisés - Retrait et transport des balles avec chariot d'extraction - Surveillance d'inclinaison de la plaque de compression Nodpfxjywi Hbo Afgecp - Retrait automatique - Hydraulique nécessitant peu de maintenance - Dimensions de la machine : 1 020 x 812 x 1 922 mm (L x P x H) - Poids : env. 290 kg - Puissance moteur : 1,1 kW - Raccordement : 1 x 230 V / 50 Hz, prise Schuko - Force de pressage : 40 kN - Poids de la balle (selon le matériau) : jusqu'à 60 kg - Taille de la balle : max. 700 x 500 x 600 mm (L x l x H) - Cerclage semi-automatique à 2 tours avec feuillard

Stanje: rabljeno, Proizvajalec: EDA Ncodpfx Asyq Nrcsfgsp Skupne dimenzije: 6600x1400x(1700 mm višina) Oprema ni v obratovanju, ne deluje zaradi hidravlične težave!!

Stanje: rabljeno, Leto izdelave: 2015, Proizvajalec: HSM Tip: HL 4010 Re Leto izdelave: 2015 Nsdpeyq Nqrefx Afgocp Tlačna sila: 40 t

Stanje: rabljeno, Leto izdelave: 2013, stiskalna sila: 40 t, Proizvajalec: HSM Tip: HL 4010 Re Nsdpfx Afeyq Ngtegecp Leto izdelave: 2015 Tlačna sila: 40 t

Stanje: rabljeno, Press screw REG-MAC for drying films and fibers, and for compacting foam material (e.g. Styrofoam, EPS) Nedpeyvp Snjfx Afgjcp Drive motor 55 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, teža bale: 450 kg, Oprema: dokumentacija / priročnik, Horizontal baler DIXI 60 SLD Year of manufacture: 2012 Press serviced / new hydraulic cylinder installed. Semi-automatic 60-ton pressing system for efficient volume reduction of residual (recyclable) materials in industrial and commercial applications: - Cardboard Ncsdpfeyw Hz Njx Afgop - Tetra Packs - Films - Foams - PET bottles - Insulation mats - and other compressible materials. Machine dimensions (L x H x W) approx. mm: 4150 (5080) x 1725 x 2035 Filling opening (W x H, standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Max. pressing force: 60 t / 600 kN Compaction cycle (average) approx. s: 47 Bale size (W x H x L) approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370–410 Binding: manual Number of bindings: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on weight, volume, and especially on the distance. When inquiring, the following information is relevant: delivery address (postal code and city). Further details should be discussed by phone; therefore, to enquire about transport costs and other delivery arrangements, please contact us by telephone. Our contact details can be found in the legal information for the seller. Payment in cash upon collection is possible. We sell and export worldwide. Due to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices – excluding VAT. Opening hours Mon–Fri: 8:00 am – 4:00 pm Sat: closed

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used Ncodpjra A E Uofx Afgep

Stanje: rabljeno, Horizontalna hidravlična stiskalnica za sode Ncodjpyncajpfx Afgsp

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, KAMPWERTH SHD 1600 Horizontalna balirna stiskalnica, vklj. z 3 izmenljivimi kontejnerji 48000x2800x3000 Stiskalnica za papir // Stiskalnica za odpadke // Stiskalnica za smeti Stiskalnica, 1 kos • Tip: Kampwerth SHD 1600 • Leto izdelave: 2001 • Lastna teža: 3500 kg • 15 kW • Dimenzije: 5000x2300x3700 mm (za transport razstavljena) Kontejnerska škatla za balirno stiskalnico, 3 kosi • Leto izdelave: 2001 • Volumen: 28 m³ • Lastna teža: 3100 kg • Polnilna teža: 12.000 kg • Dimenzije: 7000x2400 mm Ncjdpfxexm Skro Afgjp Lokacija: Bielefeld

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Ncedpfsw Ig Susx Afgjp Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, teža bale: 600 kg, Horizontalna balirna stiskalnica HSM HL 7009 Re/Li. Stroj je v zelo dobrem stanju in ga redno vzdržuje pooblaščen servisni center. Ta balirna stiskalnica je zasnovana za večje projekte odstranjevanja odpadkov v maloprodaji ter v manjših in srednje velikih centralnih skladiščih. Stiski modela HL 7009 imajo prečni prerez 1100 x 1100 mm in lahko pri dolžini baleta 1200 mm tehtajo do 600 kg. To zagotavlja optimalno izkoriščenost nosilnosti tovornjaka. Pritisna sila: 700 kN Specifična pritisna sila: 58 N/cm² Pogonska moč: 10,5 kW Napetost / frekvenca: 400 V / 50 Hz Nazivna prostorninska zmogljivost (teoretično): 42,97 m³/h Odprtina za polnjenje – širina x dolžina: 890 x 1020 mm Dimenzije baleta – širina x višina x dolžina: 1100 x 1100 x 1200 mm Skupne dimenzije – dolžina x širina x višina: 5366 x 2525 x 2559 mm Teža baleta: 600 kg Njdpfx Afeyvztwegocp

Stanje: novo, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. Its construction is compact, user-friendly, and it is manufactured in Germany. The large oil tank ensures continuous operation. The briquetting press is immediately ready for use – simply plug it in and start working. Njdpeyr Tpnofx Afgecp

Stanje: novo, For industrial production of rectangular briquettes The ZBP 500 briquettes pressable materials into highly compacted briquettes. The briquettes are easy to store and, thanks to their stackability, easy to transport. In the press chamber of the hydraulic press unit, the briquettes are formed by a pressure cylinder. This allows for the production of up to nine briquettes per minute with a press force of 1 kg/cm². Standard equipment: - Safety limit switch for oil temperature and oil level - Oil cooler - Automatic briquette length monitoring - Automatic hopper level monitoring - Control cabinet with PLC control for fully automatic operation Options: Nodpfx Ajyr I Hzefgocp - Customizable hopper extension available according to customer requirements - Press ram with lettering/logo

Stanje: novo, številka stroja/vozila: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container sizes (customizable on request) Left- or right-hand configuration Hydraulics with separate oil tank All series also available as "DUO" variants Ncjdjyr I Huopfx Afgep Wood chips, sawdust, shavings, etc. are generated in all craft and industrial woodworking operations. This results in significant daily storage and transport costs. Briquetting presses offer an ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of self-ignition is significantly reduced. The briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether it’s wood, paper, biomass, foam, or polystyrene – the ZBP briquettes every suitable material. With a throughput capacity of up to 35–130 kg/h, they are particularly suitable for small and medium-sized businesses. Flexible installation options thanks to availability in both left- and right-hand models. Start briquetting now!

Stanje: novo, številka stroja/vozila: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideally suited for combustion in wood gasifiers as well as in smaller wood chip boilers and heating systems. Any material generated in a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, and more are by-products found in all craft and industrial enterprises within the woodworking sector. Enormous storage and transport costs are incurred daily for these materials. Briquetting presses offer an ideal solution, as briquettes are simple and space-saving to store and transport. Additionally, the risk of self-ignition is significantly reduced. Nodpfx Aoyr I Hnefgjcp The briquetting presses require little space, are robustly built, and feature low-maintenance technology. Whether wood, paper, biomass, foam, or Styrofoam – the ZBP can briquette any suitable material. With a throughput of up to 35 – 130 kg/h, they are especially suitable for small and medium-sized businesses.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, vhodna napetost: 400 V, teža bale: 550 kg, skupna masa: 2.450 kg, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Nedpfxsyuxy Ro Afgecp Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, DIXI 80 SLD horizontalna preša Polavtomatski prešni sistem z 80-tonskim pritiskom za gospodarsko zmanjšanje volumna ostankov (reciklabilnih) v industriji in trgovini: Karton Tetrapaki Folije Pene PET plastenke Izolacijske podloge in drugi stisljivi materiali. Pritisk: 80 t Električni priklop: 400 V 50 Hz; 11 kW; D-32 A (opcijsko: K-32 A) Cikel – povprečno cca: 35 sek. Nodpfoyuxv Eex Afgscp Dolžina cca: 4.320 mm (brez dvigalne naprave in palete) Širina cca: 1.830 mm Višina cca: 1.830 mm : 2.620 mm (s lijakom) Vstopna odprtina (Š x G) – Ohišje: 1.040 x 1.110 mm Dimenzije bala: 1.120 x 1.120 x 1.200 mm Teža bale cca: 500–600 kg Vezava: 4 ročne žice z hitrimi zapirali Teža stroja cca 8.000 kg (brez bale)

Stanje: pripravljen za uporabo (rabljen), Stisna sila: približno 700 kN (približno 70 ton) Moč motorja: približno 11 kW Napajanje: 3 × 400 V / 50 Hz Teža posamezne bale: do približno 600 kg Dimenzije bale: približno 1100 × 1100 × 1200 mm Ncjdpfx Aera Dddofgjp Dimenzije stroja: približno 5,9 m dolžine, 2,5 m širine, približno 2,6 m višine Teža stroja: približno 7 ton Čas cikla: približno 45–47 s Konstrukcijske značilnosti • velik polnilni otvor za karton • možnost samodejnega polnjenja (npr. s transporterjem) • ročno vezanje z žico (4 žice) • blokada palete in hidravlična vrata za prevzem bale Prednosti te preše • velike bale = manj transportov • visoka stisna sila • prilagojena za neprekinjeno delovanje Balirka iz leta 2016 brez preklopnika

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Approximate production time: +/- 5 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which guarantees consistent briquette quality during continuous operation. The pressing process is carried out solely by hydraulic pressing force, without the addition of any binding agents. Depending on material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approximately 0.5 m³. Silos with larger volumes or special containers for installation under existing extraction and filter units as complete disposal systems are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip hopper of the press can be loaded manually, via conveyor belt, with a dust extractor, or with a tipping bin. For fully automated systems, it is recommended to use a lifting-tipping device in combination with a shredder. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. Depending on the model, briquette length ranges from 40 to 80 mm, and the diameter (depending on the type) is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be fitted with a catch tray, allowing coolant, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are filled into the briquetting press hopper. A stirrer installed at the bottom of the hopper prevents bridging and feeds the material into the pre-compression chamber. In this chamber, a hydraulic slide pre-compresses the material and pushes it into the pressing block. The main press cylinder compresses the material against a vertical slide until the set pressure is reached. Subsequently, the vertical cylinder moves upwards and the stable briquette is ejected. The more homogeneous the material, the more consistent the length of the produced briquettes. Advantages of briquette production include: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Cost-effective disposal • Profitable sale of briquettes Briquetting Press NEM 900: for briquetting aluminium chips Throughput capacity: up to a maximum of 350 kg/h (material dependent; chip length less than 10 mm) In the last test with aluminium chips under 20 mm – approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Ncsdpfx Aegfm Ryefgjp Technical Data: Total power consumption: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including stirrer Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PVB330354, stiskalna sila: 5 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 500 mm, dolžina bale: 1.000 mm, širina bale: 700 mm, višina bale: 800 mm, teža bale: 120 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 230 V, vhodni tok: 10 A, skupna masa: 600 kg, transportna višina: 2.370 mm, moč: 1,1 kW (1,50 KM), transportna širina: 1.350 mm, transportna dolžina: 900 mm, vhodna frekvenca: 50 Hz, Balinirna stiskalnica, doslej uporabljena za folijo. Nedpfjyt R Rxsx Afgecp

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: nepreverjeno, številka stroja/vozila: 0485.1184.463, zunanji premer: 1.300 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe pomeni obvezo za pravočasen prevzem bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNE PODROBNOSTI Premer posode: 1.300 mm PODROBNOSTI STROJA Dimenzije & Teža Dimenzije (D x Š x V): 2000 x 1500 x 1800 mm Teža stroja: 700 kg Ncsdpfx Aoynkapjfgop Zunanja referenca: Pieper - Lot 5

Leto izdelave: 2008, stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, vhodna napetost: 400 V, teža bale: 550 kg, skupna masa: 2.450 kg, Used HSM V-Press 1160 Plus vertical baler from 2016. The machine is regularly serviced by an authorized service center. The baler is fully functional and in excellent technical and mechanical condition. Pressing force: 594 kN Ncedjytpxbjpfx Afgsp Voltage / required: 400 V / 50 Hz Feed opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Press material: film, mixed paper, cardboard, trimmings from cutting machines Freight costs depend on weight, volume, and especially on distance. When requesting a quote, the following information is relevant: delivery address (postal code and city name); due to further required details, we ask you to contact us by phone to clarify transport costs and additional delivery modalities. Our contact details can be found under the seller’s legal information. Payment in cash upon collection on site is possible. We sell and export worldwide. Due to our large storage capacity, we can supply larger quantities flexibly and promptly. Please contact us prior to purchase. We issue intra-community invoices – VAT excluded. Opening hours: Mon-Fri: 8:00–16:00 Sat: closed

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 97020-0010, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, moč: 45 kW (61,18 KM), obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, Ta balirni stroj prodaja podjetje Bollegraaf Recycling Solutions. Gre za balirni stroj HBC80 (45 kW) z med drugim križnimi žicami. Leto izdelave balirnega stroja: 1997 Nedoxvh Dyopfx Afgscp Balirni stroj Bollegraaf HBC80 45 kW Dimenzije bal: 1100*720 Glavni motor 45 kW Vmesni lijak Transportna dovodna cev Električna omara Schneider PLC