Stroji za raziganje pločevine nakup rabljenega (95)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 5 mm, skupna dolžina: 950 mm, skupna širina: 850 mm, skupna višina: 1.175 mm, skupna masa: 80 kg, vhodna napetost: 380 V, trajanje garancije: 24 meseci, nazivna moč: 1,1 kW (1,50 KM), moč: 1,1 kW (1,50 KM), Oprema: dokumentacija / priročnik, CENTRIFUGALNI SUŠILNI STROJ CENTRIFUGALNI SUŠILEC ZA KOVINO Tehnične specifikacije: Ohišje sušilnika Material: železo debeline 5 mm, premazano s kislinsko odporno barvo. Premer: 58 cm V: 80 cm Košara za sušenje Material: nerjavno jeklo debeline 1,5 mm, elektropolirano. Premer: 44 cm Višina: 32 cm Prostornina košare: 50 l Hitrost: 3000 obr/min Centrifugalni motor: Moč: 1,1 kW 3000 obr/min Gedpfxerkl Uns Ab Tjuk Sušilni ventilator Material: aluminijeva litina Moč motorja: 0,25 kW Hitrost: 3000 obr/min Moč grelca: 2 kW grelna cev Zunanje dimenzije: D: 850mm Š: 850mm V: 1175mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, 2 sanding units with inverter ready for 3rd unit Vacuum table Gjdpfx Aswqrtqjb Teuk working width 950 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G2372-13, delovna širina: 900 mm, delovna višina: 1.190 mm, dolžina brusnega traku: 1.900 mm, širina brusilnega traku: 930 mm, The machine has seen little use and only has 10 operating hours! TECHNICAL DATA Application area: precision grinding, removal, and calibration of workpieces Working width: 900 mm Abrasive belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Extended table opening: up to 250 mm Constant working height: 1,190 mm Speed and Feed Aggregate speed: 11 and 22 m/s Feed speed, frequency-controlled: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Grinding Technology Equipment Abrasive belt units: 2 Motor: Two-speed motor Contact roller height adjustment: Handwheel for correcting pressure or belt thickness Height adjustment display: Electronic digital display of feed table height in mm Motor for contact roller unit: for finish grinding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 62 A Power: 31.68 kW Guedpfxowa Ubcj Ab Tek EQUIPMENT - 2 abrasive belts - Rubber-coated steel rollers - Extraction system

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 3.862 h, Funkcionalnost: popolnoma funkcionalen, Used machine Year of manufacture: 2017 General specifications: Max. working width sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Brush diameter (external): 350 mm Table opening: 0 – 100 mm Min. part size: 50 x 50 mm Feed speed, frequency-controlled: 0.5 – 8 m/min. Electricity: 1st unit – W – Sanding belt: 11 kW 2nd unit – RB – Rotating brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency-controlled: 2.6 kW Guodpfxjw Dzytj Ab Tjk Vacuum pump: 15 kW Electrical connection: 400 Volts Frequency: 50 Hz Compressed air only for sanding belt unit: Required air pressure: 6 bar Consumption: 160 l/min. Dust extraction at 100 mm water column: Sanding belt unit: 2,000 m³/h Vacuum pump: 1,500 m³/h Weight: approx. 6,000 kg Including one set of brushes and a starter set of sanding belts. New dust extraction system optionally available. Machine has been technically overhauled (Transport conveyor and bearings are new, value approx. €20,000) Immediately available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, delovna širina: 200 mm, 2024 Deburring and Finishing Machine F200 XLDS with Magnetic Fixture. Suitable for deburring, edge rounding, deslagging and/or grinding of steel parts up to 200 mm width. This refers to an F200 XLDS 4-station machine, type TS, with touchscreen control. Compared to the standard F200 XL, this machine is equipped with a slag removal roller for the efficient removal of slag from plasma-cut components. Gsdpfshnc E Aex Ab Tjuk The F200 deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magnetic sheet metal parts between 15 and 200 mm wide. High-speed deburring, deslagging, grinding and edge rounding. This deburring machine features a slag removal roller ("slag hammer") as the first working station. The second station is an abrasive belt, followed by two stationary disc brushes; one rotates clockwise (CW), the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS offers an extremely high processing speed while achieving superior edge rounding in a single pass. The machine is supplied as standard with fully adjustable speeds for the conveyor belt and the grinding and/or brush heads, allowing every conceivable process step and result to be set. You define the desired finish. Simple operation via HMI touchscreen at the front of the machine. The magnetic system securely fixes parts to be processed on the conveyor belt so that even small workpieces (from 15 x 15 mm) can be processed safely, quickly and without issues. At Q-Fin, we strongly believe in a narrow machine for small workpieces and a wider machine for larger items. In many cases, the output of this machine is five times higher than comparable machines. See for yourself and book a demonstration. We can now offer you this F200 DS - MAG demonstration machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction system and the associated ductwork. Available only while stocks last. The machine comes with a 1-year warranty excluding wear parts. Delivery ex works Bergeijk. If required, we can also offer transport, installation, and on-site operator training. The machine can be viewed in the showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us for an attractive quotation.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.350 mm, Rabljeni stroj za odstranjevanje ostrih robov Costa, delovna širina 1350 mm. 2 vrsti s ščetkami, priloženi številni obrabni deli. Gsdpfxsxrrwvo Ab Teuk

Stanje: novo, Leto izdelave: 2025, * 60 l zmogljivost * 2,2 kW visoko zmogljiv trifazni pogonski motor * Nastavljiv nadzor hitrosti do 200 vrt/min Gjdeh Nnbcjpfx Ab Teuk * Krmilna plošča in dozirna črpalka vključeni - Dozirna črpalka samodejno dozira kemikalijo v posodo * Časovnik delovnih ur * PU ali INOX plošča * Zamenljiv ventil za izpust odpadne vode * Notranja posoda ima kanale in reže, ki preprečujejo lepljenje na stene.

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Guedpfx Ajt Hw Iiob Tsk Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630056, skupna masa: 5.200 kg, vhodni tok: 95 A, ERNST Neptun EBB 1500 je stroj za odstranjevanje ostružkov in obdelavo robov pločevine, namenjen čiščenju ter zaokroževanju robov kosov, rezanih z laserjem, izsekanih ali izžganih. Ta stroj omogoča izmenično obdelavo različnih materialov, kot so jeklene pločevine, aluminij, pocinkane pločevine ali materiali, prevlečeni z zaščitno folijo, zahvaljujoč fleksibilnemu valju za odstranjevanje ostružkov in kompletu krtač. Glavne značilnosti ERNST Neptun EBB 1500: • Večnamenskost: Obdeluje kose iz različnih materialov brez potrebe po stalni zamenjavi brusnih elementov. • Funkcionalnost: Gsdpfx Aboxmhxxj Touk Uporablja fleksibilni odstranjevalni valj in komplet krtač (jeklenih ali lamelnih) za mehčanje ali zaokroževanje robov. • Preciznost: Omogoča enakomeren, enak polmer na vseh robovih. • Idealna rešitev za: Podjetja, ki obdelujejo različne materiale in zahtevajo obdelavo robov po rezanju.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, - 1 set of cleaning tools included with the machine Gusdpfx Ajwpulasb Tjk - 3-phase power supply - 5-pin electrical connector - Includes transport and storage trolley The support bar cleaner from BMZ ensures a longer service life for the support bars through repeated cleaning. It cleans quickly and easily without the need to remove the bars for cleaning. This saves valuable time! Cleaning an entire standard-sized pallet (1500 x 3000 mm) takes around 30 minutes. On laser cutting machines with pallet changers, users can even clean the bars during the cutting process. The BMZ Pro Cleaner removes slag even from heavily used bars and automatically adjusts to varying slag thicknesses up to 25 mm. It is also suitable for stubborn stainless steel slag. Regular cleaning increases process reliability and the quality of manufactured parts.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 2.120 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN026032, The machine was in use in our own production at the Bad Wurzach site. Equipment: Tool | Tool wear compensation | Camera set. Offered as a package with 2 conveyor belts and a WDE 3002 wet extraction unit. Further information available on request. The SBM-XL S2B2 grinding and deburring machine is designed for double-sided edge rounding and oxide layer removal of steel and stainless steel parts in a single pass. The LISSMAC system is suitable for processing laser-cut parts. Technical Data SBM-XL S2B2: Pass-through width: max. 1500 mm Processable sheet thickness: 0.5 - 50 mm Load capacity: 300 kg/m Voltage: 400 V / 50 Hz Network type: 3~ PEN / 3~ PE+N Gedpfx Aot Tx Dxob Tsuk Rated current: 74.3 A Rated power: 33 kW Protection class: IP 42 Continuously adjustable feed rate: 0 - 4 m/min Sheet thickness adjustment: electric Tool adjustment: electric Weight: approx. 4200 kg Dimensions (W/D/H): approx. 3600/2100/2000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Capacity 400 liters Usable volume 300 liters Maximum fill weight 850 kg Max. workpiece dimensions 850 x 200 mm Max. individual workpiece weight 30 kg Rotation speed 4.0 - 15.0 rpm Drum width (internal) 925 mm Drive motor 380 V Machine weight approx. 1,950 kg Dimensions (LxWxH) 3100 x 1600 x 2000 mm Good / well-maintained condition (!!) - machine checked and tested - machine video available - ?v=xxnCddCmXe4 Gujdpoxaa Uljfx Ab Tok Description: - LIMA cleaning machine * For long concrete formwork components, formwork clamps * For flame-cut, plasma-cut, and laser-cut parts * For stamped and sawn parts - Environmentally friendly, cost-saving, low noise - Drive via 5-fold V-belt through worm gear - Maintenance-free spherical roller bearings - Entire machine is highly sound-insulated - Dust extraction system installed as standard - Adjustable drum run time - Variable speed regulation - Drum can be brought to any position by jog mode - Space-saving due to compact construction - Extraction unit built into the machine - One-lever quick drum lock - Machine mounted on vibration dampers - Generous discharge area, suited for Euro standard containers - Free access for forklift or pallet truck Working principle: - The parts to be processed are deburred, descaled, and derusted by friction against each other. - The closed construction reduces noise emission during deburring to only 68 - 72 dB(A). - The integrated dust extraction system automatically removes any dust generated during processing. - Oily stamped and sawn parts can also be processed. - For this process, sawdust is added to the drum. - The dust extraction system can be individually switched on with a time delay relay. - This ensures the parts are first de-oiled and dried. - Only after this process does the dust extraction system automatically activate to vacuum the sawdust from the drum. - Optimum processing is ensured by presetting the drum speed. - The deburring machine LIMA-400 L can be installed at any location, provided a solid floor/foundation is available. - After the process cycle, the drum stops in position for quick opening of the drum door. - One process cycle takes approx. 20 minutes.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZCVS125, skupna širina: 870 mm, skupna višina: 950 mm, skupna masa: 185 kg, vhodna napetost: 380 V, trajanje garancije: 24 meseci, nazivna moč: 1,13 kW (1,54 KM), moč: 1,13 kW (1,54 KM), širina obdelovanca (maks.): 150 mm, dolžina obdelovanca (maks.): 150 mm, ZCVS 125 – OKRUGLA VIBRACIJSKA MAŠINA Gusdpeh Agr Hjfx Ab Tok * Neto volumen: 125 litara * Vrlo otporna P.U. obloga (90 Shore) * Uključena dozirna pumpa * Zamjenjivi ventil za ispuštanje otpadnih voda * Prema zahtjevanoj veličini promjera za separator MOTOR: * Trofazni motor visokih performansi * 1,1 kW, 1500 o/min (talijanski OLI) * Motor se ne podmazuje – nije potrebna zamjena ili održavanje masti UPRAVLJAČKI ORMARIĆ: * Glavni prekidač i sigurnosni stop prekidač * Brojač vremena i radnih sati * Upravljačka kutija s prekidačem za smjer rada motora (desno/lijevo) * Sukladno CE sigurnosnom standardu BOJANJE: * Boje: RAL 5011 i RAL 7036 * Korišten je epoksidni premaz za dugotrajan vijek boje

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Working height: adjustable from 0.5 mm to 150 mm Working width: 1150 mm Maximum part weight: 300 kg Wide belt with abrasive belt length: 2200 mm Supplied as standard with vacuum holding system, optionally with magnetic holding system Thanks to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. Godpfem Nlm Dsx Ab Tjuk The machine structure can accommodate up to 3 internal processing units and one additional external processing unit. Please contact us for further information and images via email (at) or

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), - Demonstration machine in like-new condition - 180° oscillating head for rounding and deburring - Ergonomic operation - Consistent edge rounding - Suitable for processing small parts - Anti-slip mat Gsdpfsflvc Hjx Ab Teuk

Stanje: novo, Leto izdelave: 2023, skupna dolžina: 13.000 mm, skupna širina: 8.000 mm, skupna višina: 17.000 mm, teža obdelovanca (maks.): 500 kg, skupna masa: 600 kg, BMZ Manual Hand Deburring Machine BMZ M1 The BMZ-M1, equipped with a vacuum table, allows for easy manual deburring of multiple parts simultaneously. The system can be fitted with two different types of brushes, and changing the brushes is very quick and easy. As the brush is arranged parallel to the table, it enables more uniform grinding results. The motor weight is balanced, making the system ergonomic for the operator. The BMZ M1 delivers maximum quality at a minimal price. Possible Applications: Gujdperp Dp Nefx Ab Tjk - Edge rounding - Deburring - Slag removal - Oxide layer removal - Polishing

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN040890, delovna širina: 1.350 mm, najv. debelina pločevine: 120 mm, skupna dolžina: 3.300 mm, skupna širina: 2.170 mm, skupna višina: 2.260 mm, teža obdelovanca (maks.): 500 kg, skupna masa: 5.200 kg, vhodna napetost: 400 V, trajanje garancije: 12 meseci, vrsta zaščite (IP koda): IP42, vhodna frekvenca: 50 Hz, vhodni tok: 56 A, GRINDING AND DEBURRING MACHINE FOR THICK SHEET METAL. SLAG REMOVAL, DEBURRING, EDGE ROUNDING | Equipment: tooling, magnetic track, conveyor belt cleaning brush, interior lighting, ME 5000, ID key switch, camera set, LiServ, energy measurement package. Available from October 2025. | SMD 335 DRE - P Edition Passage width: 1350 mm Processable material thickness: 1.0 - 120 mm Gusdpfjwza Udsx Ab Tok Load capacity: 500 kg/m Voltage: 400 V / 50 Hz Mains connection: 3 + PE / 3 + PEN Rated current: 56.0 A Rated power: 25.5 kW Protection class: IP 42 Feed rate stepless: 0.3 - 8.0 m/min Weight: approx. 5200 kg Dimensions (W/D/H): approx. 2170/3300/2260 mm

Stanje: novo, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Speed range 0 - 2830 rpm Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Required space approx. 1435 x 1100 x 1510 mm Gedpfx Aoxab Hpsb Tjuk The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°, allowing for quick changeover between the units. The weight-balanced arm enables easy movement of the head over the workpiece, resulting in uniform edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & a flap brush - Grinding head stations can be swiveled 180° - Working area 800 x 1300 mm - Weight-balanced arm for easy swiveling - Non-slip table surface - Ergonomic machine operation via push buttons "On/Off" - Grinding head with stepless speed control via frequency inverter - Handle for ergonomic handling

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.350 mm, Grinding and deburring machine COSTA MD5 CVC 1350 Grinding, deburring, edge rounding, and finishing of series components Year of manufacture: 2021 Control system: Costa Operating hours: seldom used Technical data: - Free-standing machine - Working height: variably adjustable from 0.5 mm to 150 mm - Working width: 1350 mm - Max. part weight: 400 kg - Length of wide belt sanding belts: 2620 mm - Constant table height, infeed via sanding units - Intuitive PLC control for creating, saving, and retrieving programs - Electromechanically positionable sanding units in 0.01 mm increments Accessories: - Extraction system: extraction unit with wet separator W 4000 Guedpfjwq Dnmex Ab Tek

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Gedenah Taepfx Ab Tsuk Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: novo, Timesavers Series 12 WW The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding—to remove heavy burrs and splatter—and Station 2 to achieve a surface finish on the part. The conveyor carpet transport speed is infinitely adjustable. The table opening can be adjusted from 0.8 to 100 mm. Gsdpfx Abewqf U Uj Touk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, trajanje garancije: 12 meseci, širina obdelovanca (maks.): 1.300 mm, RWT Deburring Machine – Possible Configuration Four-Station Machine: 1. Deburring with contact roller abrasive belt 2. Cup brush for oxide layer or slag removal 3. Cup brush for edge rounding 4. Finish grinding with contact roller BSM series machines can be equipped with the following work units: Abrasive belt grinding unit (R) – removes burrs projecting above the material surface, removes scale and corrosion from the surface Planetary disc brush unit (D) – rounds edges, creates radii, and removes the oxide layer from the sides after laser cutting Rotary aggregate (A) with flap brushes – deburring and edge rounding without removing protective film, surface homogenization Non-woven abrasive brush unit (B) – cleans and polishes the surface material in advance These deburring machines are used for the following applications: Deburring parts after laser cutting – edge deburring, oxide removal, and surface finishing Deburring parts after plasma cutting – slag removal, rust removal, overflow material removal, edge rounding, and surface finishing Deburring parts after punching – removal of sharp edges, edge rounding, and final surface finishing Deburring parts after waterjet cutting – deburring and edge rounding, removing traces left by waterjet cutting, and final surface finishing Deburring foil-coated stainless steel parts – deburring and edge rounding without removing the protective film Main advantages of the machine: Modular system – we design the machine precisely according to your requirements High-quality and uniform deburring of all product edges Processing of very small workpieces using magnetic or vacuum table Very simple operation via Schneider Electric touchscreen Grinding, deburring, and finishing with a single machine Very fast tool changes and rigid machine frame Due to the wide range of possible machine configurations, we recommend personal consultation and free grinding samples at our facility, so that we can evaluate our customers’ requirements and then suggest the most suitable machine configuration for the respective production. Gedpfx Aoudal Deb Teuk

Stanje: rabljeno, Leto izdelave: 2000, Brushes - Diameter 250 mm Brush width 80 mm Speed range 1500 / 3000 rpm Operating voltage 380 Volt Total power requirement 2.0 / 3.0 kW Guedoxaa Ifspfx Ab Tsk Machine weight approx. 175 kg Space requirement approx. 800 x 400 x 1,300 mm Equipment/features: - Deburring of manageable/convenient sheet metal parts with notches and contours - Sheet thicknesses up to 6.0 mm can be quickly and reliably rounded - Without forming a secondary burr - The sheet metal to be processed is guided manually with slight pressure along the rotating deburring brush - Simple radial brush rotation with high speed - Suitable materials: steel, stainless steel, aluminium, other non-ferrous metals * Machine link: ?machineno=1008-9238987

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Godenah Tdopfx Ab Tsuk Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or *

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Godpom Rpy Rsfx Ab Touk Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or