Skladiščenje Pločevine nakup rabljenega (6.055)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, najv. debelina jeklene pločevine: 2 mm, maks. debelina aluminijaste pločevine: 3 mm, delovna širina: 2.780 mm, delovna višina: 1.090 mm, TEHNIČNE PODROBNOSTI Največja dolžina pločevine: 2.780 mm Največja širina pločevine: 1.500 mm Največja dolžina upogibanja: 2.550 mm Debelina pločevine pri nerjavečem jeklu: 2,5 mm Največja višina upogiba: 185 mm Debelina pločevine pri aluminiju: 3,0 mm Največji upogibni kot: ± 135° Delovna višina: 1.090 mm PODROBNOSTI STROJA Dimenzije & Teža Dimenzije: 12.500 x 7.400 x 2.600 mm Teža stroja pribl.: 19.000 kg Skupna priključna moč: 43 kW Obratovalne ure: 40.000 h Fgjdpfxsxhfbtj Ah Deh OPREMA Avtomatsko/ročno nalaganje preko PCD Avtomatski nakladalni sistem z dvižno mizo Avtomatski upogibni center P4-2516 Avtomatska razporeditev orodja ALA Simetrično CLA Polavtomatska razkladanje končnih delov preko SAP

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, Stroj za upogibanje pločevine: Birlik KSM 1280X1 stroj za upogibanje pločevine Tip: KSM Leto izdelave: 2007 Fgodpjw Ty Dujfx Ah Doh Dolžina upogibanja: 1300 mm Zmogljivost upogibanja: 1 mm Premer valjev: 2 x 90 mm, 1 x 50 mm Naprava za stožčasto upogibanje Omrežna napetost: 400 V, 50 Hz, 0,75 kW Upravljanje s stopalko. Trenutno je vgrajen reduktorski motor z večjo hitrostjo od standardne. Dolžina stroja: 1900 mm Širina stroja: 550 mm Višina: 1300 mm Teža: 300 kg Visoko trdni valji skladno s certifikatom SAE 1050.

Stanje: novo, Dolžina upogibanja: 1050 Debelina pločevine: 1 Premer zgornjega valja: 56 Tehnični podatki: - Ohišje iz sive litine - Ročno ali motorizirano (opcijsko) upogibanje - Po upogibu se zgornji valj odpre na stran za enostavno odstranitev materiala - Naprava za stožčasto upogibanje - Premikanje zadnjega in spodnjega valja ročno z volanom navzgor in navzdol - Prenosna upravljalna konzola - V skladu s CE standardi Opcije: Fjdpfx Ahed Ab Uye Dogh - Zadnji valj z motorjem - Digitalni prikaz položaja zadnjega valja - Pokrov ohišja - Kaljeni valji EURO 396, -- Imamo veliko referenc!

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 80870603, Št. izdelka: 870810142 Fgodexmhk Iepfx Ah Deh

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1. postaja: odstranjevanje robnih srhov pločevine, 2. postaja: odstranjevanje srhov pri izrezih in zunanjih radijih, z VA krtačami; maksimalna debelina pločevine: 5 mm Fjdpfxjxmi Sas Ah Dogh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1976, vrsta upravljanja: ročni, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, delovna širina: 200 mm, najv. debelina pločevine: 3 mm, moč: 2,5 kW (3,40 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, skupna masa: 300 kg, skupna dolžina: 2.400 mm, skupna širina: 800 mm, skupna višina: 1.500 mm, Krožne škarje za rezanje kovinskih pločevin v kolutih - Otto Kaiser - 1 rez Fjdoxf Trhepfx Ah Degh Idealno za rezanje kolutov v ozke trakove Rezanje pločevine do debeline 1,5 mm (jeklo idealno do 1,2 mm) Širina do 200 mm Odmotavanje in navijanje kolutov Regulacija hitrosti preko reduktorja Stroj je nameščen v tovarni in je mogoče videti v delovanju. V delovnem stanju. Malo uporabljeno.

Stanje: novo, Leto izdelave: 2025, Avtomatski stroj za izdelavo strešne kritine z aluminijaste ali jekleno cinkane za širino pločevine 1000mm Vključen avtomatski odvijalec pločevine,Simens krmilje, tehnična mapa.. Fsdpfx Ajw A Rt Heh Dsgh ROOFING SHEET MAKING MACHINE#ROOF PANEL FORMING MACHINE#METAL ROOFING SHEET ROLL FORMING MACHINE#ROOF PANEL PRODUCTION MACHINE#ROOF TTLE MAKING MACHINE

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, premer valja: 60 mm, delovna širina: 1.050 mm, najv. debelina pločevine: 1 mm, 3-Walzen-Blechrundbiegemaschine Isitan 1050 x 60 x 1,2 mm, manuelle Ausführung, zu verkaufen Manuelle Rundbiegemaschine für Blech, in sehr gutem Zustand abzugeben. Hersteller: Isitan 1050 x 1,2 Maximale Blechbreite: 1050 mm Maximale Blechstärke: 1,2 mm Fsdowk Rlxepfx Ah Dogh Mit Drahtnuten an den Walzenenden Konisches Biegen möglich Walzendurchmesser: 60 mm Obere Walze abnehmbar für einfache Werkstückentnahme Abmessungen der Maschine: Länge: 130 cm Höhe: 100 cm Breite: 65 cm Gewicht: 240 kg

Stanje: novo, Sheet thickness: 45 Bending length: 2600 Top roller diameter: 460 Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Four rollers arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roller positioning - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically powered - Movable control panel - In compliance with CE standards Fedjd Ab Rhopfx Ah Dogh Options: - Variable rotation speed EUR 5,858 - Material feed table EUR 5,100 - Oil cooler STD. - Center support EUR 18,750 - Side supports EUR 12,500 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Leto izdelave: 2025, Odvijalnik RAZ-ENO 1250/2 - Jedro z 4 napenjalnimi rokami, na ležajih z diskom in zavoro Fgjdpexd Rgmofx Ah Doh - Največja širina zvitka: 1250 mm - Nosilnost: 2.000 kg - Notranji premer: 480–530 mm

Stanje: pripravljen za uporabo (rabljen), Odmotalec, odmotalec pločevine, rabljeni stroj Skupne dimenzije: 750 × 550 × 1260 mm Fgjdpfx Ahoxfkype Deh Električni podatki: 400 V Odpiranje: 190 – 420 mm

Stanje: dober (rabljeno), Leto izdelave: 2021, Maks. dolžina pločevine: 3048 mm Fsdoxg Nqcopfx Ah Dogh Maks. širina pločevine: 1524 mm Maks. dolžina upogiba: 2550 mm Maks. višina upogiba: 185 mm Debelina pločevine (nerjavno jeklo): 2,5 mm Debelina pločevine (aluminij): 3,0 mm Maks. kot upogiba: ±135° Delovna višina: 1090 mm Skupna potrebna moč: 43 kW Teža stroja pribl.: 19.000 kg Potrebni prostor pribl.: 12.500 x 7.400 x 2.600 mm

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 2 mm, skupna širina: 3.990 mm, Stroj je dobro vzdrževan Fgedpfx Ahoxiv Tpj Dsh

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta aktuacije: električni, premer valja: 90 mm, delovna širina: 1.270 mm, najv. debelina pločevine: 3 mm, skupna masa: 520 kg, moč: 1,1 kW (1,50 KM), vhodna napetost: 400 V, največja hitrost vrtenja: 6 obr/min, vrsta vhodnega toka: trifazni, Oprema: kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Stroj za upogibanje pločevine BOLUK BM 1270 x 90 - 2,5 stroj za upogibanje pločevine NOVO! Naprodaj. Proizvajalec: BOLUK 1270 x 90 mm Leto izdelave: 2023 Dolžina upogiba: 1270 mm Moč upogibanja: 2,5 mm Premer valja: 90 mm - Valji iz visoko trdnega jekla, certificirani SAE 1050 - Žične utore na koncih valjev (4/6/9 mm) - Ročno nastavljiv zadnji valj - Mobilna upravljalna plošča s pedalom - Natančno upogibanje z zavorno-motorjem - Konusna naprava za upogibanje - Ročno zložljiv konec Fgodpfx Ahjxhub As Djh - Glavni okvir iz litega železa Hitrost upogibanja: 6 m/min Moč motorja: 1,1 kW, 50 Hz, 380 V Premer žične utore: 4/7/10 mm Dimenzije stroja: 1850 x 700 x 1200 mm Teža: 520 kg

Stanje: novo, Bending length: 2050 mm Sheet thickness: 3 mm Top roller diameter: 110 mm Technical data: - Rear roller motor-driven - Cone bending device - Hardened and polished rollers - The entire frame made of St 52 steel - Main motor with braking system - Top and bottom rollers are driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Rear and bottom roller movement operated manually - In compliance with CE standards Options: - Top roller driven by electric motor EUR 1,260 - Digital display for rear roller position EUR 1,010 - Hardened rollers EUR 1,136 - Special voltage EUR 480 - Sheet feeding table - Bottom roller driven by electric motor Fgodpfx Aod Ab N Ajh Doh We have a large number of references!

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €145,200 Leasing rate: €2,744.28 Working width: 1,350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 6,000 m³/h Extraction connection diameter: 150 mm Compressed air connection: 6 bar Length: 4,200 mm Width: 2,300 mm Height: 2,350 mm Weight: 4,200 kg WITH 2 WORKING GROUPS: 1 X ABRASIVE BELT AND 1 X TOP BRUSHING UNIT * The machine is constructed from welded and normalized steel to ensure a stable and rigid frame. * Work table with motorized height adjustment, featuring synchronized movement of four screws. * Independent motors, integrated within the structure, equipped with emergency brakes. * Dust extraction hoods inside the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness, with decimal tolerance * Thickness setting with control (+/- 0.1) * Alarm control center with immediate visualization of emergencies or faults. FEED UNIT: * Table made of solid metal structure with ground and wear-resistant sliding surface. * Modified structures for vacuum systems available on request * Table raising/lowering from 780 mm up to a maximum of 950 mm above floor level. Motor power for table adjustment: 0.25 kW. * Maximum load allowed on the table: 140 kg. Fgedpfxswir Das Ah Dsh * Variable feed rate with inverter, range 0.4 to 4.5 m/min, options 0.2 to 2.0 m/min or 0.6 to 6.0 m/min available. * Conveyor belt made of natural special rubber, oil- and heat-resistant, with automatic centering system. * Lateral guides to prevent the conveyor belt from lifting. * Rubber-coated pressure rollers, oil- and heat-resistant, positioned before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Feed speed controlled via main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Precision-ground and balanced contact roller with a diameter of 180 mm. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, enabling control of the working position and compensation for abrasive belt wear, with an adjustment range of 8 mm. This system is controlled by a pneumatic cylinder, which allows automatic engagement of the unit and, in case of emergency or machine stop, immediate retraction of the abrasive belt from the working area. Option to use abrasive belts and/or Scotch Brite. * Pneumatic on/off switch. * Roller adjustment up/down ('grit' stroke 10 mm) * Variable speed motor, 11 kW, with automatic emergency braking. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable oscillation width and duration. * Pneumatic abrasive belt tensioning system. LED display for wear monitoring. * Belt centering system with electronic photocell display, adjustable oscillation amplitude and intensity. 2ND GROUP: ROTARY BRUSH UNIT * Consists of eight deburring brushes, four rotating clockwise and four counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: dober (rabljeno), Number of straightening rollers: 5 Sheet width: 430 mm Sheet thickness: 1 mm Upper roller diameter: 2 upper rollers – Ø 60 mm Lower roller diameter: 3 lower rollers – Ø 60 mm Fedpfx Ahjgvl U Rs Dogh

Stanje: zelo dobro (rabljeno), Timesavers Serija 42 WRB Stroj tehnično obnovljen, deluje brezhibno 1. Postaja – brusilna enota za odstranjevanje izstopajočih zvarnih robov in brizgov, možno tudi površinsko obdelavo s Scotch trakom. 2. RB krtačna enota, 8 razburljivih valjev za vsestransko, enakomerno zaobljanje robov. Delovna širina 1350 mm. Vakuumski trak Hitrost transportnega traku brezstopenjsko nastavljiva preko potenciometra Fsdjxl A D Tepfx Ah Dogh Hitrost krtač brezstopenjsko nastavljiva preko potenciometra Debelina obdelovanca od 0,8 do 100 mm Dodatno priložen suhi odpraševalnik Stroj na voljo od sredine novembra. Za dodatne informacije nas kontaktirajte.

Stanje: novo, Leto izdelave: 2025, Povsem nova asimetrična valjčna upogibalka pločevine Maksimalna dolžina upogibanja 1.550 mm Premer zgornjega in spodnjega valja Ø 128 mm Premer upogibnega valja Ø 135 mm Nazivna zmogljivost upogibanja po celotni dolžini 3 mm jeklene pločevine z 240N/mm - pri notranjem premeru Ø 384 mm Mere približno 2,9 x 1 m x V 1,1 m Pogonska moč 4,5 kW Teža približno 1.450 kg. Oprema: - Podaljški valjev za uporabo profilnih upogibnih valjev - Motorno nastavljanje pritisnega in upogibnega valja - Brezstopenjsko nastavljiva hitrosti vrtenja valjev 0 do 6 m/min - Kaljeni valji 55 do 60 HRC Fsdpfsxdiqqjx Ah Djgh Opcijsko dobavljivo: - Digitalni prikazovalniki položaja - Oprema za konično upogibanje - Brušeni valji - Mobilna centralna komandna omara

Stanje: zelo dobro (rabljeno), Z dodatno opremo Leto proizvodnje: 2014 Fgodpjxfu Nzofx Ah Deh Serijska številka: A14052158 Maksimalna debelina obdelovane pločevine: 4 mm Dolžina valja: 165 mm Doseg rok: 300 mm Hitrost valja: 15,3 obr/min Moč motorja: 2,2 kW Dimenzije (D x Š x V): 1550 x 510 x 1180 mm Teža: 341 kg

Stanje: novo, Bending length: 2600 mm Sheet thickness: 16 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable from the control panel - All rolls driven by hydraulic motor and planetary gear - Lateral movements driven hydraulically Fgodpod Ab S Uofx Ah Doh Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 We have numerous references!

Stanje: rabljeno, Leto izdelave: 2023, Condition: Used Year of manufacture: 2023 Stock number: 5542 Delivery time: Prompt, subject to prior sale Country of origin: Italy Price: €11,600 Available in stock: 1 Working width: 1300 mm Sheet thickness range – mild steel: 150 mm Brush diameter: 150 mm Vacuum area: 250x350 mm Table height: 945 mm Motor: 0.75 kW Length: 1400 mm Width: 1000 mm Height: 1450 mm Weight: 300 kg Demonstration machine / as new condition Net price (original price €13,600.00) The Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding, and polishing for a range of materials – stainless steel, steel, copper, brass, and aluminium. The grinding head with two rotating tools (grinding disc or brush) is mounted on a swivel arm. Fodpewiryhefx Ah Degh The Easy T features an infinitely adjustable speed and a vacuum system, enabling the workpieces to be fixed securely to the table. It is a cost-effective and efficient solution for conventional grinding and deburring. All edges of the workpiece are processed from every angle and direction. The grinding head can be rotated by 180°, allowing for quick tool changes. Features: * Grinding pressure applied manually * Easy operation, low operating costs The flap brush ensures precise rounding of the edges of the workpiece. Standard brushes have a diameter of 150 mm. For deburring, a support pad with a grinding disc is used. Depending on the height and hardness of the burr, the grinding disc can be set at a slight angle to apply greater pressure to the burr.

Stanje: novo, Workbench with steel sheet shelf and 10-year manufacturer's warranty* Made in Germany - Beech multiplex worktop 750 x 700 x 40 mm, without backboard - Frame made of square tubing 40/40/2 mm - Steel sheet shelf, 600 mm deep Fedpfeubxxqex Ah Dogh - Feet with plastic adjustable gliders - Surface load with evenly distributed weight: 1000 kg - Standard workbench – 750 x 700 x 840 mm (L x W x H) - Ergo version – 750 x 700 x 900 mm (L x W x H) Available in 7 different body colours: - Anthracite Grey - Gentian Blue - Flame Red - Sky Blue - Light Blue - Light Grey - Pure Orange - Reseda Green - Signal Blue - Jet Black * 10-year manufacturer's warranty. Wear parts excluded. This item is delivered to curbside free of charge. Standard delivery time is 5 working days. Free shipping within Germany, excluding islands.

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P-II-43/1380, Stroj je delujoč, nakladanje je vključeno v ceno, vabljeni. Fjdpfx Asxgngcsh Dogh

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,800 Leasing rate: €1,092.42 Bestseller 1 Working width: 650 mm Sheet thickness range – mild steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Connection for extraction: diameter 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made from stress-relieved steel welded construction for a stable and rigid frame. Work table with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each unit * Digital display for sheet thickness with decimal precision * Material thickness adjustment (+/- 0.1 mm) * Machine status monitoring with alarm notifications FEED SYSTEM Rugged steel frame, wear-resistant surface. Vacuum conveyor available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and heat resistant. Automatic conveyor tracking. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil and heat resistant. Idler rollers at infeed and outfeed tables. INCL. OPTIONAL TAMPICO BRUSH FOR CONVEYOR CLEANING 1ST WORKING UNIT – R Balanced contact roller with oil and heat resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinders for automatic working position engagement and lift-off in emergency stop. Can use abrasive belts and/or Scotch Brite. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic emergency brake. Pneumatic tensioning system for the abrasive belt. Abrasive belt centering system with electronic photo cell. Oscillation adjustment in width and time. Contact roller adjustment accuracy mm +/- 0.02 Contact roller adjustment speed m/s 10 Contact roller diameter mm 125 Rubber roller hardness Shore 55 Contact roller adjustment stroke (grit adjustment) up/down mm 8 Abrasive belt speed m/s 3 – 18 Motor power kW 7.5 2ND WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counter-clockwise. Transversal oscillation of the entire unit. Quick-change brush holders. Brush diameter mm 115 Number of brushes pcs. 8 Oscillation stroke mm 15 Rotation motor power kW 2.2 Rotation speed rpm 1,000 Oscillation motor power kW 0.37 Brush feed speed m/s 10.0 Optional equipment: B Group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,150.00 with wire brush 0.3 mm €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW €740.00 X GROUP – CUP BRUSHES Motor with variable speed 5.5 kW 350/1100 incl. Fedpfx Aewiqukoh Djgh OPTIONS: Return to Sender System (workpiece returns to operator side) €1,770.00 Conveyor belt with vacuum system – 3.0 kW €5,150.00