Stroj za ravnanje pločevine / Podajalnik pločevine

DATEC MN7-550U MN7-550U

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Hnjdpfox A Hdfox Abxen

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Hnjdpfeif Sg Sex Abxsn Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: M 91317, Decoiler Coil Weight / Load Capacity: 5 t Strip Width: 80 - 500 mm Coil Outside Diameter: 1800 mm Expansion Range: 508 mm Speed: 50 m/min Straightening Unit Strip Throughput Width: 50 - 500 mm Number of Straightening Rolls: 9 pcs. Diameter of Straightening Rolls: 65 mm Number of Feed Rolls: 2 pcs. Diameter of Feed Rolls: 150 mm Strip Thickness: 1 - 8 mm Feed Rate: 50 m/min Feed Length: 0.1 - 9999.9 mm Standard Equipment Coil Loading Station Useful Stroke: 500 mm Load Capacity: 5,000 kg Max. Strip Width: 500 mm Hnedsuqd Udspfx Abxsn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 7, zunanji premer tuljave: 1.400 mm, notranji premer tuljave: 508 mm, premer valja: 80 mm, število podajalnih valjev: 2, premer napajalnega valja: 80 mm, premer ravnalnega valja: 80 mm, širina tuljave: 400 mm, nosilnost: 3.000 kg, 1. Odvijalec Proizvajalec: Dimeco Tip: 2371 E-FPS Letnik: 2006 Nosilnost: maks. 3 t Širina traku: maks. 600 mm Razpon razpiranja: 470 – 530 mm Zunanji premer koluta: maks. 1.400 mm Opremljen z: • Hidravlično razpiranjem • Pnevmatski pritiskalni valj od zgoraj • 6 kosov omejevalnih rok za trak • Pnevmatska kolutna zavora 2. Ravnalni stroj Proizvajalec: Dimeco Tip: 1676 C-VV Letnik: 2000 Širina traku: maks. 400 mm Debelina traku: 0,8 – 4,5 mm Število ravnalnih valjev: 7 kos Število dovajalnih in izhodnih valjev: po 2 kosi Premer valjev: 80 mm Hnodpfx Astgvgpsbxjn Opremljen z: • Pogon s frekvenčnim pretvornikom • Hidravlična pomoč za vodenje traku z nosilno mizo, vodilnim nožem in zgornjo pritiskalno roko • Pnevmatsko odmikljiv dovajalni valj • Stranski vodilni valji za trak • Pnevmatsko zložljiva prehodna miza med ravnalcem in podajalnikom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 900 mm, premer struženja nad prečnim suportom: 630 mm, premer struženja: 450 mm, moč vretenovega motorja: 22.000 W, hitrost vretena (min.): 38 obr/min, največja hitrost vretena: 3.800 obr/min, izvrtina vretena: 80 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 945 mm, montažni premer: 130 mm, hitro pomikanje X-os: 40.000 m/min, hitri pomik os Y: 26.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna višina: 2.600 mm, skupna dolžina: 3.750 mm, skupna širina: 2.050 mm, nos vretena: JIS A2-6, pomik osi W: 1.000 mm, Oprema: dokumentacija / priročnik, Turn-Mill Center OKUMA Multus B300-W TECHNIČNE LASTNOSTI: CNC krmilnik: OSP-P200L Hnsdpfx Absw Eip Sjxjn Razdalja med konicami: 900 mm Največji premer obdelave: 630 mm Višina konic nad vozičkom: 630 mm Največji premer vrtenja nad posteljo: 630 mm Pomik X osi: 580 mm Pomik Y osi: -80 / +80 mm Pomik Z osi: 935 mm Pomik W osi: 1000 mm Natančnost indeksiranja B osi: 0,001° Največja hitrost glave za rezkanje: 10.000 min⁻¹ (rpm) Priključek vretena rezkalne glave: HSK-A63 Največja moč vretena za rezkanje: 16 kW Kapaciteta zalogovnika orodij: 60 Največja dolžina orodja: 300 mm Največji premer orodja: 130 mm Največja teža posameznega orodja: 8 kg Hitri pomik X osi: 40.000 mm/min Hitri pomik Z osi: 40.000 mm/min Hitri pomik Y osi: 26.000 mm/min Hitri pomik W osi: 20.000 mm/min Nos vretena: JIS A2-6 Minimalna hitrost vretena: 38 min⁻¹ (rpm) Maksimalna hitrost vretena: 5.000 min⁻¹ (rpm) Prirastek C-osi: 0,001° Moč glavnega vretena: 22 kW Nos protivretena: JIS A2-6 Minimalna hitrost protivretena: 38 min⁻¹ (rpm) Maksimalna hitrost protivretena: 5.000 min⁻¹ (rpm) Moč protivretena: 15 kW Skupna priključna moč: 39,3 kVA Nazivni tok: 56,7 A Napajalna napetost: 400 V Dimenzije stroja: 4340 x 2050 x 2600 mm DODATNE INFORMACIJE: x1 programska oprema One-Touch IGF (CD-ROM tudi za PC programiranje) x1 daljinsko elektronsko ročno kolo x1 dvobarvna signalna svetilka x1 odvajač odrezkov x1 rezervoar za hladilno tekočino

Stanje: rabljeno, Leto izdelave: 1985, Material width: 500 mm Coil weight: 1.0 t Material thickness: 0.4 – 5.0 mm Coil inner diameter: 420 – 520 mm Coil outer diameter: 1200 mm Material cross-section: 1500 mm² Number of straightening rollers: 9 Number of feed rollers: 2 Speed: 0 – 80 m/min Weight: 1.70 t Space requirements (W x D x H): 2.7 x 1.3 x 1.9 m Weight: 1.35 t Space requirements: 2.2 x 1.2 x 2.0 m Straightening machine with continuously adjustable drive, intermediate ventilation of the feed rollers, hydraulic insertion aid Hnodpfx Abjvut Hzsxjn Decoiler with auxiliary drive, hydraulic central expansion, pressure device

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 400 mm, širina brušenja: 200 mm, skupna višina: 2.250 mm, skupna dolžina: 2.000 mm, skupna širina: 3.050 mm, višina brušenja: 300 mm, For sale: CNC surface grinding machine, manufacturer Geibel + Hotz, model FS 415-Z SL The machine is immediately available and fully operational. Technical details: Year of manufacture: 1999 Grinding area: 400*200*300 mm Operating voltage: 400V / 50 Hz / 3-phase Control voltage: 2300/24 Volts Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross feed drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10 / max. 30 mm Taper: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: included Hodpfx Abjuy Tkzjxonn Space requirement: 2000*3050*2250 mm Transport and loading can be organized throughout Europe upon request and at extra cost. Prices are quoted excluding VAT. Inspection is possible by appointment. Please contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or do you wish to sell your own? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Table size: 600 x 300 mm Max. grinding area: 600 x 300 mm Grinding wheel dimensions: 406 x 50 x 127 mm Min. / max. distance table / spindle center: 500 mm Table speed, hydraulically infinitely variable: 5 - 25 m/min Cross feed: 0.1 – 20 mm Automatic cross traverse: 900 mm/min Handwheel, cross: 1 revolution: 5 mm 1 division: 0.02 mm Automatic vertical feed: 0.001 - 0.999 mm/cycle Handwheel, vertical: 1 revolution: 2 mm 1 division: 0.01 mm With AD 5 (automatic infeed): 0.005 mm Grinding spindle speeds: 1450 / 2900 rpm Hjdpfx Asizka Ijbxjnn Grinding motor: 1.5 / 3.7 kW Hydraulic pump motor: 0.75 kW Cross drive motor: 1.1 kW Vertical drive motor: 1.1 kW Machine dimensions (L x W x H): approx. 2300 x 1800 x 2100 mm Weight: 1700 kg Accessories / Special features: • 2-axis digital readout • Automatic vertical infeed with spark-out and subsequent retraction • Electro-magnetic chuck (L x W: 600 x 300 mm) • Manual grinding wheel dresser • Grinding spindle speed, 2 steps • 1 pc. grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine: Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards. We have been a major dealer in used injection molding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery: As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently available in our tested warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine Number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2x core pulls (movable core, fixed core) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection performance - Fast SK shut-down CX Midrange - Ejection of cooled nozzle plug - Start handling during mold movement - Start-up mode - Cycle time analysis - External USB keyboard - Graphic analysis with maintenance notes - Electronic coding injection unit - Pneumatic valve on BWAP for blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target/actual comparison - PV control - Active back pressure control - Single owner – German origin - Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2,500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening stroke: 820 mm Mold height: min. 330 mm Max. daylight: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrical Equipment Pump: 45 kW Heaters: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software included Hsdpexqhuuefx Abxonn Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply). The machine is offered function-tested and is in our sole ownership. The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power. For additional information about our machines and company: - We sell only machines purchased from active production that are in our own stock in Hannover. - All offered machines are tested and inspected before dismantling. - We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment. - All machines offered come from successful companies where maintenance and care are self-evident. - All machines offered are available for inspection at our warehouse.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, We have a W+D (Buhrs ITM) BB700 16K S1 Servo Inserting System, year of manufacture 2011, available! This machine is in excellent condition as it has always received the necessary maintenance and has processed only 21 million envelopes. The machine is fully prepared for integration with a Mueller Apparatebau or KERN transactional system channel for feeding/reading/gathering/folding A4 documents. In such a configuration, we can also offer a used Mueller channel equipped for continuous processing, complete with unwinder, cutter, and merger. Purchase of this optional system is not mandatory, but possible. Year of manufacture: 2011 Configuration: - 6-station base - 4x RF2 rotary feeders - 2x HF2 vacuum friction feeders - Divert bin 1 - On-edge output conveyor Prepared for a Mueller Apparatebau or KERN transactional channel for feeding/gathering/folding A4 documents, or for continuous processing with cutter integration. Envelope formats: - min. 105 × 162 mm (C6/DL) - max. 250 × 353 mm (B4) Product formats: - min. 80 × 105 mm (A6) - max. 229 × 324 mm (C4) Hsdewml S Eepfx Abxjnn Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour