6096 - KOLUT 3 T

6096 - HASPEL, Coiler 3 T

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend. Csdpofxyhfjfx Afnjpw

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Cpodpfxohrnbke Afnow Without control cabinet.

Leto izdelave: 2015, stanje: rabljeno, Prodaja proizvodne linije za W in C profile Namenjena je proizvodnji cestnih ograj, stebričkov in pritrditvenih elementov. Popolnoma opremljena linija, primerna za neprekinjeno industrijsko proizvodnjo. Linijo sestavljajo: • Dva odvijalca • Linija za izdelavo stebričkov • Linija za izdelavo parapetov • Dva stiskalnika za izdelavo pritrditvenih elementov Tehnične specifikacije: Cpedpjxhf R Isfx Afnjw • Dolžina: 17 m • Širina: 1 m • Višina: 1 m • Moč motorja: 22 kW • Teža: 18 t • Leto izdelave: 2015 • Proizvajalec: Chengxing Machinery (Kitajska) Namen in prednosti: Ta proizvodna linija za W in C profile je primerna za proizvodnjo različnih varnostnih elementov za ceste: zaščitnih ograj, podpornih stebrov in pritrditvenih delov. Oprema zagotavlja zanesljiv, stabilen in dosleden proizvodni proces. Naprava je pripravljena za ogled. Za več informacij smo vam na voljo.

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Csdpfxjcdrmmj Afnjpw Napetost: 220/380 V 50 Hz Moč: 3,92 kW Brez krmiljenja

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Cpodpfxefn Aqlo Afnow motorized decoiler

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SMG HZPU 8000-3000/2100-S1 Hidravlična vlečna stiskalnica Znamka: SMG Tip: HZPU 8000-3000/2100-S1 Cpedpfx Afsn Awd Renew Leto: 1995 Opis: Hidravlična vlečna stiskalnica s H-okvirjem Tlačna sila: 800 ton Vpenjalna površina: Pribl. 3.000 x 2.100 mm Vgradna višina: Maks. 1.400 mm

Stanje: novo, Leto izdelave: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with case-hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearing: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 deg/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: double-sided master/slave with gantry angle correction Csdpfxon Nv H Sj Afnspw Electrospindles: 8 kW to 36 kW Spindle inverter: yes Maximum spindle speed: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved and precisely machined steel structure Table type: vacuum, hybrid, steel, aluminium with M16 or M18 holes #router #CNC #milling #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #pywood #particleboard #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Expanding Mandrel Decoiler Cpjdpfxoupg Sce Afnew Type: AE-050 Strip width: 400 - 1,500 mm Strip thickness: 0.5 - 3 mm Coil weight: 20 t Coil outer Ø: max. 1,800 mm Mandrel Ø: 508 mm Year of manufacture: 2009

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 350 kW (475,87 KM), skupna masa: 1.930 kg, skupna širina: 1.200 mm, skupna dolžina: 3.600 mm, skupna višina: 2.000 mm, AMONIAKOV HLADILNI AGREGAT GEA GRASSO 350 kW Znamka: GEA Hladilna zmogljivost: 350 kW Hladilni krog: 1 kos Tip hladiva: R717 Leto izdelave: 2005 Kompresorji: 1 kos batni GRASSO Izmenjevalnik toplote: cevni (shell and tube) Dimenzije: 3,60 x 1,20 x 2,00 m Csdpfjim R A Iex Afnopw Teža: 1930 kg Stanje: dobro

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, The JJZ-CP type press is designed for the production of plywood, doors, and MDF boards. Feeding and unloading of glued elements to and from the press are carried out automatically using powered rollers. The press can be integrated with glue dispensers. Technical specifications: - Max. pressing force: 500T (adjustable) - Max. feed height: 1300 mm Cjdpfxetutwve Afnepw - Max. workpiece dimensions: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Press foundation: approx. 500 mm below floor level - Infeed table: 2000 x 1960 mm - Outfeed table: 2350 x 2500 mm - Max. power: 13.2 kW - CE mark