Obdelovalni centri s prečnim mizo nakup rabljenega (206)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21003600, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 650 mm, model krmilnika: BWO 910, delovne ure vretena: 200 h, Spindle was retrofitted in 2024 and has only 200 operating hours! Reason for selling the machine: Space required for a new acquisition. TECHNICAL DETAILS Travel distance X-axis: 1,500 mm Travel distance Y-axis: 1,500 mm Travel distance Z-axis: 650 mm (with 130 mm tool length) Rbjdpfsv Hnn Dex Ad Tst Table size: 1,500 x 1,500 mm Table height: 870 mm Control model: BWO 910 Spindle & Cooling Spindle type: High-speed milling spindle HSD Spindle retrofit: September 2024 to ES 951 (air-cooled, value: €14,000) Max. speed: 24,000 rpm Spindle operating hours: 200 h Tool system Tool holder: ISO 30 + special clamping bolts Number of tool magazine slots: 20 MACHINE DETAILS Total length: 5,640 mm Total width: 2,570 mm Total height: 4,200 mm Total weight: 8,500 kg EQUIPMENT - Flat table, tandem version with separate clamping circuits - Drum-type tool changer: - X-axis: fixed at X-zero, 4 slots for angle heads and special tools - Y-axis: travelling, 10 slots, max. D 60 - Milling unit for flexible machining options

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00110033, Year of manufacture: 2000, X-axis travel = 3200mm, Y-axis travel = 1250mm, Z-axis travel = 150mm, milling spindle 8kW, 24,000 rpm, ISO 30, drilling head: vertical drills on X-axis – 8 units, vertical drills on Y-axis – 3 units, double horizontal drills on X-axis – 2 units, double horizontal drills on Y-axis – 1 unit, vacuum 100m³/h. Further details available in the attached documentation. Rbjdpfjv Hbzwex Ad Tot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA2/003019, potovalna razdalja osi X: 4.250 mm, pomik osi Y: 2.780 mm, pomik po osi Z: 240 mm, število mest v zalogovniku orodij: 10, TECHNICAL DETAILS Condition: Very good condition, low operating hours Post-processor: Available for Fusion360 CAM Rbodpfsv E Hapsx Ad Tet Working area: 3,660 x 2,200 mm X-axis travel: 4,250 mm Y-axis travel: 2,780 mm Z-axis travel: 240 mm Movement Speed Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 15 m/min Spindle and Tool Holder Electrospindle motor power (S1): 8.5 kW Number of tool holders: 10 (without tools) MACHINE DETAILS Dimensions (L x W x H): approx. 7,000 x 6,000 x 2,700 mm Weight: approx. 5,500 kg Safety features: Light barrier and safety fence CE certificate: available Vacuum pumps: not included

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC obdelovalni center Homag Weeke Optimat BHC Venture 3, letnik 2004, na prodaj! Rbsdpex Ey H Iofx Ad Tst

Stanje: dober (rabljeno), BACCI DOUBLE JET + KUKA robot The BACCI DOUBLE JET with KUKA robot is a highly advanced, automated CNC machining center designed for the processing of wood and wood-based materials. The KUKA robot collaborates with the machine’s integrated feeder system to automatically load material, significantly increasing efficiency and minimizing manual intervention. After milling and sanding, the robot automatically removes the finished parts and places them onto pallets. This optimizes production logistics and ensures continuous operation without the need for manual reloading. Rjdpsxr Ddujfx Ad Tsbt This system guarantees seamless integration of the robot with the BACCI DOUBLE JET, which is equipped with two machining heads and twelve interpolated axes, enabling simultaneous and precise processing of components. Automated material loading and unloading, along with the integrated feeding system, enhance production efficiency, repeatability, lower labor costs, and improve operator safety. The machine is primarily used in the furniture and joinery industries, where high standards of quality and efficiency are required.

Stanje: dober (rabljeno), BACCI DOUBLE JET + KUKA robot The BACCI DOUBLE JET with KUKA robot is a highly advanced, automated CNC machining center designed for the processing of wood and wood-based materials. The KUKA robot collaborates with the machine’s integrated feeder system to automatically load material, significantly increasing efficiency and minimizing manual intervention. After milling and sanding, the robot automatically removes the finished parts and places them onto pallets. This optimizes production logistics and ensures continuous operation without the need for manual reloading. Redpsxr Dcwefx Ad Tjbt This system guarantees seamless integration of the robot with the BACCI DOUBLE JET, which is equipped with two machining heads and twelve interpolated axes, enabling simultaneous and precise processing of components. Automated material loading and unloading, along with the integrated feeding system, enhance production efficiency, repeatability, lower labor costs, and improve operator safety. The machine is primarily used in the furniture and joinery industries, where high standards of quality and efficiency are required.

Stanje: rabljeno, Leto izdelave: 2012, Integrated NC processing centre for windows and doors comprising: A) Automatic Loader, Model 'SP' Automatic loader for Base SP with 1 profiling machine - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from buffer to loading area of the profiling machine * Minimum workpiece length: 450 mm, maximum: 3200 mm * Minimum workpiece width: 40 mm, maximum: 230 mm * Minimum workpiece thickness: 40 mm, maximum: 120 mm * Working cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Group for bead recovery 2500 mm infeed height Feed speed 6–36 m/min via inverter Nr. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure roller in front of the planer with pneumatic disengagement from the control panel Pneumatic disengagement for the infeed unit before the planer spindle, controlled from the operator panel Tandem infeed group before the right vertical with quick release Feed units after the upper spindles to reduce trailing distance from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical set-up for the use of automatic loaders Manual central lubrication Pump for lubricating the worktable with automatic drive Preparation for inline integration with INTEGRA SYSTEM Rbsdpfxjixxwme Ad Tot - Working height increased to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick-change tool clamping system - Enables locking/unlocking of the tool using a simple air nozzle POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system POS. 6 Glazing bead recovery group Includes: PRL enables automatic transition from profiling to glazing bead recovery and vice versa - Working unit with spindle diameter 30 mm, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Modified tandem outfeed

Stanje: rabljeno, Leto izdelave: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Rbedpfx Ajwwiybed Tot Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails No. 3 suction cups per work rail for securing the workpiece No. 1 electro-spindle, 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - No. 12 vertical spindles, Y-axis - No. 6 vertical spindles, X-axis - No. 4 horizontal spindles, Y-axis - No. 2 horizontal spindles, X-axis Automatic tool change system with 18 positions - located at the rear of the machine Front guard and safety system with mats and safety nets Automatic lubrication system Air conditioning for control cabinet No. 1 vacuum pump

Stanje: rabljeno, Leto izdelave: 2008, PC-based numerical control with XILOG PLUS software Mobile pendant with command functions The working area on the X-axis is 4400 mm Working area on the Y-axis: 1360 mm Working area on the Z-axis: 180 mm Travel path of Z-axis: 200 mm No. 2 working supports in X No. 8 manually adjustable panel support rails with positioning LEDs No. 3 suction cups for panel hold-down per rail No. 4 pneumatic Bakelite bars for lifting the panel (facilitates loading and unloading) No. 1 vertical electrospindle with vector axis and automatic tool changer, HSK 63 taper Automatic tool changer with 12 positions on the machining head Drilling head assembled as follows: Rbsdpfxjpvai Dj Ad Tet No. 8 vertical X-axis spindles No. 5 vertical Y-axis spindles No. 4 horizontal X-axis spindles No. 2 horizontal Y-axis spindles Safety system with bumper system on operator head No. 1 vacuum pump, 100 m3/h Automatic lubrication

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Rbodpfxjkvrxuo Ad Tot Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Nominal payload: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED Rbjdpfx Adsw D Dhas Tst

Stanje: rabljeno, Leto izdelave: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working range on X-axis: 3228 mm Working range on Y-axis: 1580 mm Working range on Z-axis: 200 mm with suction cups H74 mm Working range on Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support bars Rsdpfx Asugpwnod Tjbt Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for the bar Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm Automatic 16-position tool changer on X-axis carriage Independent Tesa BH17 drilling spindles arranged as follows: No. 5 independent spindles for vertical drilling in “X” direction No. 5 independent spindles for vertical drilling in “Y” direction No. 4 spindles for horizontal drilling in “X” direction No. 2 spindles for horizontal drilling in “Y” direction No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum processable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and rigidity: * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum dimensions of the edged panel: 300 x 300 mm Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Double-position edge magazine in protective housing for edges up to max. 65 mm thickness Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle No. 1 rounding/chamfering unit for edges No. 1 EF60A combination trimming/scraping unit Perimeter safety fence Chip extraction system with motorised belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. bSolid - 3-axis machining. bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Redpfjw D E A Ejx Ad Tsbt Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.280 mm, pomik osi Y: 1.320 mm, pomik po osi Z: 170 mm, število mest v zalogovniku orodij: 12, The machine will be provided "free loaded onto truck". No dismantling or loading costs! TECHNICAL DETAILS Travel X-axis: 3,280 mm Travel Y-axis: 1,320 mm Travel Z-axis: 170 mm CNC control: BiesseWorks Work beams: 6 pcs Suction cups: 18 pcs Tool magazines: 12 MACHINE DETAILS Total weight: 3,000 kg Electrical Input voltage: 400 V Type of input current: AC Required power: 25 kW Rsdovvvcbspfx Ad Tjbt EQUIPMENT - Safety mats - BECKER vacuum pump

Stanje: dober (rabljeno), Leto izdelave: 2004, I am selling a 3-axis CNC machining center Biesse Rover 24L with traverse table, year of manufacture 2004. Rodpfxsh Txlcj Ad Tjbt Configuration: 3-axis main spindle HSD, fully overhauled and water-cooled (RS1600) Tool magazine with 7 positions, ISO30 at the head 1x grooving saw, X-direction Drilling head with 14+4+2 drilling spindles Usable working area: 4500x1330mm 2 working areas, 4 clamping zones Automatic central lubrication system Total power: 35 kW XDNC 2.01 software with operating manual Becker pump 250/300 m³/h, 5.5 kW Additional vacuum for template work or auxiliary clamping devices Good condition. Immediately available from stock. Requires repair: Hand grips on the traverse table, rotation of the ISO30 magazine at the head.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Fully operational, available for inspection in Wadowice Rbsdpowpthtefx Ad Tet X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Control type: CNC XP 600

Stanje: rabljeno, TIG welding machine Output: 220 A = 35% duty cycle 160 A = 60% duty cycle 130 A = 100% duty cycle Rjdpfx Adsw Htywj Tebt Current type: AC and DC Mains connection: 400 V, 50 Hz, 32 A plug - stepless power adjustment - high-frequency ignition - 2-stroke and 4-stroke operation - water-cooled - 7.5 meter TIG torch package with hand torch - shielding gas pressure regulator Space requirement (L x W x H): 900 x

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, CNC machining center Biesse Rover 20 Year of manufacture: 1997 Manufacturer: Biesse Italy Serial no.: 64851 Working area: 2,893 x 950 mm 6 consoles with 12 vacuum cups Milling spindle with ISO 30 tool holder, 3.6 kW Drilling unit: - 10 vertical drills - 6 horizontal drills - Grooving saw - 6-position tool changer Rbedpfjtpuu Djx Ad Tet Control: NC410 Color display Total power consumption: 10 kW 400 V, 50 Hz Includes safety fence (not shown in pictures) 3 safety mats With Becker vacuum pump, 3.0 kW CE marked Weight: 1,900 kg

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Biesse Rover 22 CNC Machining Center Year of manufacture: 2001 SN 07498 Work area 4 axes X-axis: 3060 mm Y-axis: 1080 mm Z-axis: 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic Bakelite bars for panel lifting Vertical electrospindle 7.5 kW with automatic tool changer, ISO 30 taper Automatic tool changer with 7 positions on the working head Drilling head with 20 spindles, arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Rbsdpfx Aoggxihod Tst Grooving saw 120 mm Safety tread mats 110 m³/h vacuum pump CE marked Weight 3500 kg Specifications subject to change

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Rodpfolc Dwnjx Ad Tsbt Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Ex site

Stanje: novo, Leto izdelave: 2020, obratovalne ure: 1 h, SWISS KRONO Kft. ponuja CNC vrtalni in rezkalni stroj MW2131KS proizvajalca Masterwood. V prilogi dodajamo opis strojev ter dodatne slike in informacije v skupni mapi. Redpsrxubwjfx Ad Tebt

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: AP 194 J4, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 700 mm, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 1.200 mm, dolžina podajanja os Z: 600 mm, moč polirne enote: 7.500 W, 5-axis machining center Balestrini IDEA 2 Axis travel range: X - 30,000 mm Y - 1,600 mm Z - 700 mm Working area: X - 2,000 mm Y - 2 x 500 mm Rbodswrb Tpspfx Ad Tjt Z - 600 mm Spindle power: 7.5 kW Option to split the table widthwise 2x vacuum pumps included 4-position spindle Tool magazine - 4 positions Enclosed machine roof for dust extraction Windows XP Listed price is net Disassembly is the responsibility of the customer

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: AP 133 D3, 5-axis machining center Balestrini IDEA 2 Axis travel range: X - 1500 mm Y - 1200 mm Z - 700 mm Working range: X - 100 mm Rbjdpfx Ajwrb Uajd Tjt Y - 2x500 mm Z - 600 mm Spindle power: 7.5 kW Table can be divided along its width 2 vacuum pumps included 4-position spindle Windows 2000 operating system Price stated is net Dismantling is the responsibility of the buyer

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000028154, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stroj je bil zagnan leta 2019, en lastnik. Uporabljan je bil zelo malo časa. Opis Uporabno delovno območje, konfiguracija 5 osi: X=3280mm, Y=1600mm Hodi osi: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Hitrost pomika osi: X=80 m/min, Y=60 m/min, Z=30 m/min Elektrovreteno: HSD 5-osna 11 kW z neprekinjenim vrtenjem za 360° na oseh B in C, omogoča zelo natančno obdelavo kompleksnih oblik hlajeno s tekočino Vrtalna glava: HSD 20 navpičnih vreten 4 vodoravna rezalni diski na osi X rezalni diski na osi Y Rbsdpfjxdl H Uox Ad Tjt Delovna miza: 6 prečk Isbjwhypnjni Itxtobb 4 priseski na vsaki prečki priprava za uniclamp Zaloge orodij: revolverski zalogovnik s 16 pozicijami Vakuumski sistem: Vakuumska črpalka s kapaciteto 250 m³/h, ki zagotavlja trdno pritrditev obdelovancev med obdelovanjem.

Leto izdelave: 1999, Stanje: potreben popravila (rabljeno), številka stroja/vozila: AL 1 / 99, Connection: 9.0 kW, 400 V Compressed air connection: 6 bar Extraction: 1 x 160 mm, 3400 m³/h, 30 m/sec Compressed air consumption: 200 NL/min Drilling spindles: 9 units / 3000 rpm Grooving cutter: 1 unit / 6000 rpm Milling spindle: 1 unit / 16000 rpm Dimensions (LxWxH): 4050 x 2050 x 1900 mm Redpfoiiy E Tox Ad Tsbt Weight: approx. 1500 kg Max. panel thickness: 55 mm