Obdelovalni center z obrobljenim robom

Biesse Rover A Edge 1632

Numerical control BH 660 with BIESSE BSolid software
bEdge module for edge management
bSolid surface design
Sophia – IoT connectivity
Office monitoring
Working range on X-axis: 3228 mm
Working range on Y-axis: 1580 mm
Working range on Z-axis: 200 mm with suction cups H74 mm
Working range on Z-axis: 245 mm with suction cups H29 mm
No. 8 adjustable ATS panel support bars
Pneumatic clamping system installed, divided into two Y-zones
No. 6 pneumatic Bakelite bars for panel lifting
No. 3 adjustable suction cups for the bar
Ksdpfxeugpwns Akcsnc
Suction cup setup assistant
No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm
Automatic 16-position tool changer on X-axis carriage
Independent Tesa BH17 drilling spindles arranged as follows:
No. 5 independent spindles for vertical drilling in “X” direction
No. 5 independent spindles for vertical drilling in “Y” direction
No. 4 spindles for horizontal drilling in “X” direction
No. 2 spindles for horizontal drilling in “Y” direction
No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm)
GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs
Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability
Plastic edge thickness from 0.4 to 3 mm
Wood edge thickness from 0.4 to 2 mm
Laminate edge thickness from 0.4 to 1.2 mm
Maximum edge width 65 mm
Workpiece thickness from 10 to 60 mm
Minimum processable internal radius with edge processing: 30 mm
Maximum external radius for edging, proportional to edge thickness and rigidity:
* 10 mm with edge thickness up to 1 mm
* 20 mm with 2 mm edge thickness
* 30 mm with 3 mm edge thickness
Minimum dimensions of the edged panel: 300 x 300 mm
Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm
Double-position edge magazine in protective housing for edges up to max. 65 mm thickness
Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle
No. 1 rounding/chamfering unit for edges
No. 1 EF60A combination trimming/scraping unit
Perimeter safety fence
Chip extraction system with motorised belt
Liquid cooling system
Automatic lubrication system
No. 1 vacuum pump with 250 m³/h capacity
TECHNICAL DATA TO BE CONFIRMED

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.