2006 Biesse Rover B 2.30Biesse
Rover B 2.30
2006 Biesse Rover B 2.30
Biesse
Rover B 2.30
Leto izdelave
2006
Stanje
Rabljeno
Lokacija
Sesto Calende 

Prikaži slike
Prikaži karto
Podatki o stroju
- Opis stroja:
- 2006 Biesse Rover B 2.30
- Proizvajalec:
- Biesse
- Model:
- Rover B 2.30
- Leto izdelave:
- 2006
- Stanje:
- rabljeno
Cena in lokacija
- Lokacija:
- Sesto Calende, Italy
Klic
Podrobnosti ponudbe
- ID ponudbe:
- A18546756
- Št. reference:
- MMA007
- Nazadnje posodobljeno:
- dne 10.10.2025
Opis
Numerical control XP 600
Working area in the X-axis: 3060 mm
Working area in the Y-axis: 1140 mm
Hodpfx Ahjv Aacfo Djfn
Working area in the Z-axis: 160 mm
Number of working zones: 2
Bar worktable
Number of adjustable bars for suction cup support: 6
Number of pneumatic Bakelite bars for panel lifting (?): [please verify]
2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining
1 vertical electrospindle with C-axis, 12 kW motor
Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30
Drilling head BH19L with 18 spindles, configured as follows:
- 7 vertical on the X-axis
- 6 vertical on the Y-axis
- 4 horizontal on the X-axis
- 2 horizontal on the Y-axis
- 1 independent saw blade unit for grooving in the X-axis
Front photocell guard and safety system
Automatic lubrication system (?)
Climate control system for cooling and cleaning the machine control unit
Vacuum pump: 250 m³/h
TECHNICAL DETAILS MUST BE VERIFIED
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Working area in the X-axis: 3060 mm
Working area in the Y-axis: 1140 mm
Hodpfx Ahjv Aacfo Djfn
Working area in the Z-axis: 160 mm
Number of working zones: 2
Bar worktable
Number of adjustable bars for suction cup support: 6
Number of pneumatic Bakelite bars for panel lifting (?): [please verify]
2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining
1 vertical electrospindle with C-axis, 12 kW motor
Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30
Drilling head BH19L with 18 spindles, configured as follows:
- 7 vertical on the X-axis
- 6 vertical on the Y-axis
- 4 horizontal on the X-axis
- 2 horizontal on the Y-axis
- 1 independent saw blade unit for grooving in the X-axis
Front photocell guard and safety system
Automatic lubrication system (?)
Climate control system for cooling and cleaning the machine control unit
Vacuum pump: 250 m³/h
TECHNICAL DETAILS MUST BE VERIFIED
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2017
Pošlji zahtevo
Telefon & Faks
+39 0331 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake