Vertikalni stroj za brizganje

ENGEL e-insert 740H/60 single-C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Gjdowxw S Ijpfx Ab Tskf Can be tested under power.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Travel X/Y/Z: 630mm/530mm/465mm, Tool holder: SK40, Spindle speed: 12,000 rpm, Tool stations: 32, Table size X/Y/Z: 920mm/540mm, Machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, Weight: approx. 6,500kg. Documentation available. On-site inspection is possible. Gedpfx Ajwm Nphjb Tekf

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 5319, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL DATA Travel ranges: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine Bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive a centrally mounted rack. Hardened compact linear guides ensure high precision. Machine Column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems provide dynamic performance and accuracy. Protection is provided by telescopic steel covers. Spindle Slide and Spindle Head: Made from GGG 60 cast iron, guided by compact linear bearings. Optimal power transmission via long guideways and tight arrangement of the Y and Z axes. Dual Ball Screw Drive: Two vertical ballscrews with separate drives and measuring systems for high dynamics and long-term accuracy. Drive System: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring System: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-Axis Fork Head with Motor Spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor Spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid cooled Electrical Equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine-to-cabinet: 5 m. Control Cabinet Cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy Supply: Compressed air 4–6 bar, G ¼ connection, with filter pressure regulator and condensate separator. Gksdpjwdub Dsfx Ab Tef Control System: Siemens 840D sl with swiveling operator panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote Maintenance: Fault diagnosis via alarm manager, notification by email/SMS (SIM card and network required). TightBlock Machine Base (X = 8,000 mm): Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X travel range, structurally verified. Coolant System: 500 l tank, filtration system

Leto izdelave: 2001, Stanje: rabljeno, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Gjdpfedwf Dbex Ab Tokf

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Tool holder: SK 40 Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Maximum tool weight: 260 kg Spindle speed: 12,000 rpm Maximum table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Gedpfx Ast Hr Ahob Tskf Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Gkjdetyyn Hopfx Ab Tsf Documentation available. On-site inspection possible.

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, a set of new pumps, and GEIGER LR 16 EC handling unit. The handling unit should be overhauled. Gkjdpfx Absiiv Aqe Tef

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD with Rotary Table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Gkodpfjvdtzdox Ab Tjf Features and equipment: - C98 control system with BP26_SE operator panel - VAST GOLD sensor system - 13-position probe changer magazine - Probe change plate - Probe accessories - Calibration sphere - Reference probe - Workstation with monitor - Calypso Basic 5.2 software - Upgrade to current Calypso version and additional options possible - Complete retrofit with C99 and current Calypso version possible - Available at short notice

Stanje: zelo dobro (rabljeno), Engel Victory 1350/220 Tech Clamping Force: 220 tonnes Year of Manufacture: 2004 Platen Size (W x H): 860 x 830 mm Gedspdrpzepfx Ab Tskf Screw Diameter: 55 mm (618 cm³) Control System: CC 200 Minimum Tool Installation Height: 250 mm Maximum: 730 mm

Leto izdelave: 2023, Stanje: novo, - modern ergonomic design - manual testing sequence with analog dial gauge (reading accuracy 0.2 HR units) - easy operation and fast testing procedure - test chamber height approx. 185 mm - test chamber depth approx. 160 mm - dimensions 545x182x755 mm Test load ranges: 60 / 100 / 150 kg Gedpjpbbc Hjfx Ab Tjkf Test methods: HRA/HRB/HRC Standard scope of delivery: - hardness tester - prism support - flat test table Ø150 mm - flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - spindle guard - accessory case