2015 Biesse Rover A 2243 G FT

Biesse Rover A 2243 G FT

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, številka stroja/vozila: 57269, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.205 mm, model krmilnika: NC 1000, DÉTAILS TECHNIQUES Zone de travail axe X : 4 300 mm Zone de travail axe Y : 2 205 mm Broche verticale : 1 pièce, HSK F63 Changeur d’outils : 8 positions (tête) Changeur d’outils : 21 positions (arrière, à chaîne) Tête de perçage : BH 20 Broches verticales sur l’axe X : 8 pièces Broches verticales sur l’axe Y : 8 pièces Broches horizontales sur l’axe X : 4 pièces Broches horizontales sur l’axe Y : 4 pièces Unité de scie sur l’axe X : Diamètre 120 mm Unité de scie sur l’axe Y : Diamètre 120 mm DÉTAILS DE LA MACHINE Commande : NC 1000 Logiciel : Biesse Works Poids : 400 kg Cpsdpfx Aeydkdgofnsw ÉQUIPEMENT Table nesting FT à surface complète Système de chargement automatique avec table élévatrice latérale Machine d’étiquetage automatique pour impression de codes-barres Système automatique d’impression et de dépose d’étiquettes adhésives Système de déchargement automatique avec bande transporteuse motorisée Système de protection frontale et de sécurité avec tapis et grillages Système de lubrification automatique Climatisation pour l’armoire électrique Pompe à vide

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Cpsdpfx Asgmn H Asfnsw

Stanje: pripravljen za uporabo (rabljen), Caractéristiques techniques En cours de vérification Centre d’usinage Nesting à table pleine Course axe X : 4300 mm Course axe Y : 2205 mm Course axe Z : 326 mm Électrobroche Broche 3 axes, 12 kW Porte-outil HSK F63 Magasin d’outils type revolver, 8 emplacements Tête de perçage BH17L Cpedpfotqi Uyox Afnow Tête de perçage verticale et horizontale + unité de rainurage 10 forets verticaux, pas de 32 mm (7 orientés X et 3 orientés Y) 6 forets horizontaux, pas de 32 mm (2 orientés X et 1 orienté Y) 1 lame de rainurage, Ø 120 mm, pour rainurage en X (utilité de coupe 25 mm) Unité de perçage Z indépendante pour optimiser les temps d’usinage Table à vide 9 zones avec panneau martyr MDF Butées de référence arrière, avant et latérale (gauche) 2 pompes à vide 300 m³/h Commande : Sur PC Windows Logiciel machine BiesseWorks Advanced Programmation et optimisation des cycles de perçage, coupe, fraisage, trajets outils et changements d’outils Macros paramétriques personnalisées Import de fichiers réseau et/ou USB Simulateur 3D de trajectoire pièce et outil Programmation paramétrique de la pièce Programme de surface table martyr Gestion des collisions Jeu d’outillage et cônes paramétriques fournis 2 clés logicielles version bureau BiesseWorks fournies Puissance et moteurs Tension : 400 V Raccordement : Triphasé Puissance totale : 33,4 kW Dimensions hors tout Longueur : 8400 mm Largeur : 5800 mm Hauteur : 2445 mm Poids : 3840 kg

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Cpedpfod Ev Upox Afnsw Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Leto izdelave: 2014, Biesse Rover B G 2231 FT, komplett mit Be- und Entladesystem Beschreibung: Arbeitsbereich X in Y: 3100 x 2205 mm Flachbett-Tisch Anzahl Achsen Fräsmotor: 3 Kein Bohraggregat Werkzeugaufnahme: HSK 63 Cpedpow Hf A Rsfx Afnow Wechsler: Feststehend, 21 Plätze Vakuumpumpen: 2 x 300 m³ Absperrungen Office-Softwarelizenz Ein- und Auslauftisch (Beladung mittels Vakuumheber) Abkehrarm Einlaufanschlag B-Solid Presetter Detaillierte Beschreibung auf Anfrage (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer in den technischen Daten, Preisen und allen Angaben vorbehalten. Keine Garantie auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise zzgl. Inserierungskosten Machineseeker Best woodworking machines from the Netherlands Holland Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 rpm - Spindle drive power: 7.6 kVA LINEAR AXES - Travel distance X/Y/Z axes: 500 / 410 / 610 mm Cpjdpfx Afeuhbt Renew TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 sec TABLE - Table size: 650 x 400 mm - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total drive power: 25 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,640 x 2,100 mm - Machine height: 2,274 mm - Machine weight: 2,250 kg MACHINE HOURS - Operating hours: 9,070 h ACCESSORIES - Control: BROTHER A00 - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without frequency inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 bar - Oil mist extractor: AAF Astrosta - Electrical transformer - Tool holders: 42 pcs

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Cjdjrthkuepfx Afnjpw Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Csdpfx Afednxydonopw Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000 Codpfx Afjd Ixadjnspw

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Cpsdpsdt Rgvsfx Afnjw VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12