Obdelovalni center

BIESSE ROVER A 2243 G FT

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Gtsdpfx Ajwt Snyjb Eew Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 rpm - Spindle drive power: 7.6 kVA LINEAR AXES - Travel distance X/Y/Z axes: 500 / 410 / 610 mm TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 sec TABLE - Table size: 650 x 400 mm - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total drive power: 25 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,640 x 2,100 mm - Machine height: 2,274 mm - Machine weight: 2,250 kg MACHINE HOURS - Operating hours: 9,070 h ACCESSORIES - Control: BROTHER A00 Gtodpjuhbt Rjfx Ab Eow - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without frequency inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 bar - Oil mist extractor: AAF Astrosta - Electrical transformer - Tool holders: 42 pcs

Stanje: zelo dobro (rabljeno), TECHNICAL DATA NOT OF THIS MACHINE RETURN DEVICE for Edge Banding Machine (LEFT) In combination with a single-sided edge banding machine, this allows a single operator to consistently feed the machine. Air curtain table, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor belt (9080 x 1560 mm) Panel dimensions (MIN/MAX): Length – 240 mm / 2800 mm Gsdoff R Tqepfx Ab Ejtw Width – 120 mm / 1300 mm Thickness – 8 mm / 60 mm, optional up to 100 mm

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Gedpjwcyd Isfx Ab Ejtw Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Godpfjwtgcxex Ab Estw Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: rabljeno, Leto izdelave: 2005, 2005 BIESSE ROVER B 4.40 FT CNC obdelovalni center s 3 osmi Tehnične značilnosti na zadnji fotografiji Godpfxowmdynj Ab Estw Delovne ure stroja: 45.343 Ure v avtomatskem načinu (delo): 27.267

Stanje: rabljeno, Leto izdelave: 2014, Centre d’usinage CNC Biesse Skill 12 24 G FT Année de fabrication : 2014 Numéro de machine : 60961 Porte-outil : HSK F63 10 têtes de perçage verticales 12 positions de changement d’outil Logiciel : BiesseWorks Axe X : 2465 mm Axe Y : 1260 mm Axe Z : 324 mm Démonté pour le transport sur une remorque standard ; 4500x2200x2400 mm ; poids net 2000 kg - Année de fabrication : 2014 - Documentation disponible : Oui - Certificat CE : Non - Système de serrage d’outil : HSK-F63 - Outil de perçage fourni : Oui └ Broches de perçage verticales [Nb] : 10 - Positions de changeur d’outil [Nb] : 12 - Zone de travail X [mm] : 2465 - Zone de travail Y [mm] : 1260 - Zone de travail axe Z [mm] : 324 Informations financières Gtsdpfewnhansx Ab Eew TVA : Le prix indiqué s’entend TVA en sus TVA/Régime de marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Glenn Smeets

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a chip conveyor belt, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine we offer for sale. Contact us for more information. Working Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel supports and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops with 140 mm stroke, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops with 140 mm stroke, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) Gtsdpfxsx D H Hce Ab Esw • 4 side stops, 140 mm stroke (2 left + 2 right), pneumatic system • 4 removable center stops, 140 mm stroke (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting support bars • 6 lifting support bars for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Processing Units and Configuration • C3-A1 configuration: • Device for fitting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for fitting units on a machining group with 5 interpolating axes (units can only be used when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center-to-center) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electrospindle or 15 kW 5-axis electrospindle (requires chip deflector device; requires flange for mounting units when using a 5-axis electrospindle; requires C-axis when using a standard electrospindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electrospindles or one electrospindle plus one liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Gsdpovvi Htjfx Ab Eetw Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Profiling machine by Weinig, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Gtodpok N I I Njfx Ab Esw