Ekstruzijske naprave in linije nakup rabljenega (223)

Leto izdelave: 1981, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Hfjdpfx Aou Ttf Nob Tor Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Net roller width: 1,100 mm (max. film width) Take-off unit and flying shears

Leto izdelave: 1989, Stanje: dober (rabljeno), Ekstruder ZSK 58/32 D Leto: 1989 Hlajeni bazen iz nerjavečega jekla Sušilnik Sheer Granulator Sheer Hfjdjxzfdbopfx Ab Tsr

Stanje: rabljeno, - 3-slojna izpihovalna linija za folijo na vrtljivi platformi - spremembe in prilagoditve glede na izdelek so možne (za doplačilo) - rezervni polž, valj in različni rezervni deli so na voljo za to napravo Osnova za prevoz: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, netto Hodpfxoxq Hcde Ab Tofr

Stanje: zelo dobro (rabljeno), Ekstruder za proizvodnjo filamenta za 3D tisk – 25/25 L/D Ponujamo visokokakovosten ekstruder za izdelavo filamenta za 3D tisk. Naprava je zasnovana za neprekinjeno industrijsko delovanje ter se odlikuje po robustni konstrukciji, natančnem uravnavanju temperature in odlični homogenizaciji materiala. Idealno za proizvajalce, razvijalce materialov in raziskovalne inštitute. Tehnična oprema in značilnosti: • Ekstruder 25/25 L/D – učinkovita geometrija polža za enakomerno kakovost taline • Visoko zmogljiva talilna cona – natančen nadzor temperature za konstantno kakovost filamenta • Šoba za 3D-filament ekstrudiranje – primerna za vse standardne premernike filamentov • Hladilna kad – stabilen odvzem filamenta in optimizirano območje hlajenja • Odvzemna enota – fino nastavljiva hitrost odvzema za natančno stabilnost premera • Navijalna in polagalna enota – samodejni prevzem filamenta Hjdjxwvqqepfx Ab Tsfr • Odlično primerno za PLA, PETG, ABS, TPU in številne tehnične materiale

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, obratovalne ure: 87.618 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DS 85610, skupna masa: 4.000 kg, skupna dolžina: 5.200 mm, skupna širina: 1.700 mm, skupna višina: 2.500 mm, moč: 75 kW (101,97 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vhodni tok: 160 A, originalni WEBER 8.8 ekstruder s podaljšanim valjem na model 8.22. Z novimi in originalnimi vijaki Weber. HMI kontrolna plošča, uporabljena v čistem prostoru. Priložen je lijak. Stroj se prodaja v stanju, v kakršnem je. Hsdpfxox Apcke Ab Tefr

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 17.620 h, Znamka: Collin Lab & Pilot Solutions GmbH Model ekstruderja: E 30 M Low Boy Tip vijaka: Enopolžni Premer vijaka: 30 mm Hfedpfxexx Tnps Ab Tsr Razmerje L/D: 25 Delovne ure: 17.620 h Leto izdelave: 1999

Stanje: rabljeno, dr. wiesner Type: INTEGRA DDV -1...1 bar Product Description: dr. wiesner Integra Leak Test System The classic solution – suitable for all standard testing procedures The leak test system for industrial leak tightness and flow tests with full-graphic color display up to three independent test circuits can be operated 255 test programs can be stored automatic process optimization autoTune (option) Communication via flexibly interchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests using relative and differential pressure methods with overpressure. Special versions: none Technical Data: Power supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) Pneumatic supply: clean, dry compressed air, max. 7 bar (at connection P) Hedpfxewqm Dde Ab Tofr Test pressure range: 0 ... 1000 mbar, electronically controlled Measuring ranges: Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Interfaces electrical: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection for test specimen (Test) Connection for reference circuit (Ref.) Housing Protection class: IP40 Dimensions: 450x185x380mm (W x H x D) Weight: approx. 15.5kg Condition: used (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, PUHALNI EKSTRUDER HDPE Model EuroTruder 75 Proizvodnja: Euro-Stel, Belgija Letnik: 2013 Ekstruder: premer 75x28 D – z nastavkom za vrat in zalogovnikom za granulacijo Hedewivdkspfx Ab Tjfr Model ni priložen ODLIČNO STANJE

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rabljeni ekstruzijski stroj Reifenhäuser Tip: RH 801-1-90-30 Leto izdelave: 1990 DC motor, moč 103 kW Popolnoma delujoč Hsdsw Np S Tspfx Ab Tsfr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 62 mm, Dvojni polžasti ekstruder Ref.-št.: DE27698 Proizvajalec: Leistritz Tip: ZSE 60 MAXX Leto izdelave: 2007 Premer polža: 2 x Ø 61,9 mm L/D razmerje: 32D (možno podaljšanje na 44D za doplačilo) Hedpfx Ajxu Dp Nsb Tjfr Pogon: 232 kW Soistočnosujoči dvojni polžasti ekstruder za kompondiranje različnih polimerov. Omogoča prilagodljivo uporabo za različne tehnologije granulacije in je idealen za proizvodnjo Masterbatch, spojin, bioplastike, pa tudi za regranuliranje. Podrobnosti: Soistočnopolžni, z vakumskim odzračevanjem, segmentirani polži in cilindri Opcije: granulacija, doziranje, 1–2 stranska podajalnika, podaljšanje na 44D Ponudba ne ustreza vašim pričakovanjem? Prosimo vas, obiščite našo spletno stran Plama ali pošljite vaše podrobno povpraševanje – v našem programu imamo primerne naprave skoraj za vsak proračun.

Leto izdelave: 2005, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder WEBER DS 8.5 Hedsuziyhopfx Ab Tofr - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 - Twin parallel screws, diameter 85 mm, 17 L/D - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones - Motor power: 56 kW - Up to 150 kg/h profile – 230 kg/h pipes Very good condition

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Hfedpohy Tp Djfx Ab Ter Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, rabljen ekstruder Reifenhäuser Hfodpfx Abew Np Tkj Ter Tip: RH-241-1-50-30 WE z utorjeno dovodno območje z ročnim menjalnikom sit popolnoma funkcionalen

Leto izdelave: 2016, Stanje: kot nova (razstavni stroj),

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, REIFENHÄUSER REITRUDER RZE 85 41:D Year of manufacture: 2007 Drive/Motor: 265 kW Screw diameter: 85 mm Output approx. 900 kg/h With gear pump, dosing station, and working platform Last application: The line was used to produce PP PIPES up to a diameter of 630 mm The Reitruder technology features co-rotating screws. We have adapted this twin-screw technology for use in direct extrusion lines—primarily for inline compounding. This consolidates multiple process steps into a single operation. Sustainability Process 100% recycled material In combination with efficient vacuum units, the Reitruder technology allows you to process recycled PET bottle flakes directly—without the need for energy- and time-intensive pre-drying. Cost-effectiveness Reduce raw material costs by 30% Our Reitruder twin-screw technology can process high proportions of additives and fillers. Instead of using pre-compounded materials, fillers such as calcium carbonate or talc are continuously mixed in. At the same time, direct extrusion significantly reduces energy costs compared to the two-stage compounding process: without repeated melting and solidification, the Reitruder operates in a single production run from raw material to finished product. Direct extrusion High quality without detours With direct extrusion, you achieve quality levels for semi-finished and finished products that previously required significant technical effort. Take advantage of today's technology and combine various process steps into one. Reitruder RZE 85 EXTRUSION Alongside other innovations, the co-rotating twin-screw extruder Reitruder RZE 85 was the focal point of Reifenhäuser’s NPE trade show presentation. A refined concept with new design elements was developed. The screw geometry was adapted to new requirements with deeper channels and a redesigned intake zone. These modifications improve intake performance when using PET flakes or regrind and increase the volume available for dosing fillers. This offers significant advantages when processing lower-quality raw materials. In addition, increased degassing efficiency allows the processing of material with up to 0.5% moisture content, minimizing the need for pre-drying. Applications • Compounds • Recycled polymer • Thermoforming films • Cast films • Blown films • Foam sheets and boards • Strapping tape Price: €35,000.00 LOCATION: SACHAL EXTRUSIONSMASCHINEN D-26345 Bockhorn-Grabstede Hsdpfxsxzr H Ns Ab Tjfr Tel = WhatsApp

Leto izdelave: 2025, Stanje: novo, new PMH filament production line 30 mm extruder – 28 L/D with die for 3D filament extrusion with cooling bath with residual water blower twith laser measurement system (optional) with haul-off unit with filament accumulator (optional) with winder and traversing device Hfsdpfx Aoch Sfqsb Tor MADE in GERMANY

Leto izdelave: 2025, Stanje: novo, Our compact extruder model EX30-28d is designed to be used in all extrusion processes. We offer this extruder both as a co-extruder or laboratory extruder, and for applications such as the extrusion of welding wire, filament, solid rods, tubes, or for pelletizing with hot-face or strand pelletizers. We also realize other machine sizes—please feel free to contact us. Our standard extruder comes with a nitrided unit (screw and barrel) which covers most polymer raw materials. Hjdpjby Rfpsfx Ab Tjfr Optionally, we also offer this extruder with a wear-resistant unit, for example: for PEEK, titanium, ceramics, fiber-reinforced plastics, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Used Bellaform Extruder BH45-30D with barrier screw and mixing section. 45mm extruder with 30 L/D screw length. The extruder is equipped with a new control system. Hedpfx Absuxa Abe Tofr Fully functional. Multiple extruders of the same type available!

Stanje: novo, Valj, zapakiran v leseni zaboj, valj s keramičnimi grelci za 90 mm ekstruder, valj z utornim dovodom Hfodpfx Asua Ti Ijb Tor

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Reifenhäuser extruder Hedpfxswxvadj Ab Tjfr Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3-zone screw 35-25D fully operational

Leto izdelave: 2025, Stanje: novo, The extruder model EX20-25d is designed for laboratory-scale applications and achieves a plasticizing capacity of 5 kg/h. This extruder can be used for material development, small batch production, or as a filament extruder. As standard, we equip this extruder model with a bimetallic barrel and a fully hardened screw for high-temperature applications (up to 400°C). Therefore, abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, or fiber-reinforced materials, etc., can also be processed. Hfsdpeiv H Eksfx Ab Tjr Available machines can be inspected at our facility in Königswinter. We can also realize other machine sizes—please contact us for more details.

Leto izdelave: 2025, Stanje: novo, 30 mm extruder with crosshead for small sheathing projects, complete with cooling tank, haul-off, and winder equipped with traversing unit. Hfodpfx Absf Uc Urs Ter

Leto izdelave: 1993, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, used REIFENHÄUSER single-screw extruder with screw size: diameter 50 mm x 30 L/D with grooved feed section and degassing zone type RH 241-1-50-30v Hfsdpfx Aspy Eygob Ter with DC drive 30.2 kW year of manufacture 1993 with installed control cabinet fully functional

Leto izdelave: 2023, Stanje: skoraj kot novo (rabljeno), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [min-1]: 10–192 Hsdpfx Abeq R Tkwj Tefr Screw: nitrided Torque: 55 Nm Drive: Three-phase motor with frequency converter Drive power [kW]: 1.1 kW Barrel material: nitrided Electrical connection ratings: 3 / N / PE Supply voltage [V]: 400 V at 50 Hz Control voltage [V]: 24 V Ceramic heating bands [W]: 1200 W Number of heating bands: 3 Max. throughput: approx. 5 kg/h Max. processing temperature [°C]: 300

Leto izdelave: 2025, Stanje: novo, Extruder 30 mm - 28 L/D with die for welding wire extrusion or profile extrusion Hfsdpfx Absi Tu U Ue Ter with cooling bath with residual water blow-off with take-off unit with winder and traversing unit