Valj 90 mm

Reifenhäuser 90mm 28LD

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, It is important to note that a total of two welding machines and two CNC corner cleaning machines are available, resulting in two complete production lines. The machines are operational and still in daily use. CE conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Power connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components: - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control Bjdpsyyavrofx Aqtjdg - Central control unit - Safety light curtain Operation: Profile clamping – inserting the heated welding plate – PVC melting – generating welding pressure – welding cooling – frame removal The system operates semi-automatically/automatically. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Control panel and industrial PC Control system: Industrial PC control Safety system: - Light curtain - Emergency stop button - Safety covers - CE conformity Still under power in Hungary, the system can be dismantled and delivered around June.

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), A near-new belt roasting plant for nuts in the food industry is available. Fuel: Diesel/Electricity/Gas/LPG, Power: 2kW, Machine dimensions (L/W/H): approx. 3600mm/1900mm/1950mm, Operating hours: 31h. Roasting capacity per hour: Hazelnut kernels: 160kg, blanched peanuts: 150kg, peanuts in shell: 35kg, pistachios in shell: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt mixing kettle with a volume of 35kg and a fully automatic high-pressure belt washing system. Documentation available. On-site inspection possible. Bdodpfx Aeu Ei Utjqtog

Stanje: dober (rabljeno), Leto izdelave: 2001, - Manufacturer: IDE - Model: 45/4 - Year of manufacture: 2001 - Single-screw extruder Ø45mm 25 L/D - Analog control on the right - Screw profile: PVC - 4 heating zones on the barrel - 4 heating zones for tooling - Motor power: 8.5 kW Bjdpfx Aouhpiyoqtsdg - Throughput up to 60 kg/h Good overall condition, very clean machine

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Various Kreyenborg double-piston screen changers - Continuous screen changer - Backflush filter Bjdsh Itl Sopfx Aqtsdg - Available immediately, optionally also with control system and hydraulic unit. Please inform us of your required capacity and material when making an inquiry so that we can offer you the appropriate filter.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750 Bdjdpoud H Dmjfx Aqtjg  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC, oil-cooled Application: PVC, PE or PP Year of manufacture: 1999 Operating hours: 48,000 Drive: DC 36.3 kW 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC display Operating hours: 48,119 h Draw-off control possible via the extruder Condition: Good, ready for operation The extruder is my property Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Bdedpfxsk Nn Dzs Aqteg Germany

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged cutting machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand-held pendant for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (allows use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled, and thoroughly tested after order placement. A laser measurement of the axes is performed in our facility. We are happy to perform a custom test on the CUT 3000 for you. Incl. user training at Techma on your overhauled machine Optionally, we are happy to offer: - Transport - Commissioning - Chiller unit Bjdpfx Aqjych Rzjtsdg - Clamping devices - Consumables

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, številka stroja/vozila: XXX, Gre za paket, ki vsebuje tri erozijske stroje 310/510 Charmilles in en stroj za vrtanje pilotnih lukenj Castek. Izdelki se prodajajo samo v kompletu. Bdedotylpcepfx Aqteg

Stanje: rabljeno, Machine designation: Dry bulk feeder Manufacturer: K-Tron / Coperion GmbH Model: K-ML-FB-130QC Year of manufacture: Unknown Rotational speed: Mixer speed: 5.6 rpm Capacity: 75 liters Drive motor: 0.25 kW – mixer drive 0.25 kW Bedoiv Ic Ejpfx Aqtodg Dimensions: Length 800 mm x Width 700 mm x Height 1200 mm Empty weight: 100 kg Technical documentation: No Remarks: Mixer drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request

Stanje: novo, Leto izdelave: 2026, Our belt puller can be built in various sizes. 40–80 m/min Bodpfx Ajhd Ndxjqtedg Contact length: 170 mm to 800 mm MADE in GERMANY