Iztiskanje filamentov za 3D tiskalnike

PMH Filamentanlage

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.750 mm, skupna širina: 2.800 mm, skupna višina: 1.830 mm, zahteva za prostor dolžina: 2.800 mm, potrebna širina: 2.850 mm, potrebna višina: 1.900 mm, proizvajalec motorjev: Bitzer, volumenski pretok: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid had its own cold store, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Fgodpfxjx Ap Hpj Apljb Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Stanje: rabljeno, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel distances: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Fgsdpfx Apovt D D Usleb Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Retaining bolts: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Electrical connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105° / -15° - Direct position measurement system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 transmission stages - Fully enclosed safety cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirements L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Good condition

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Fedpfx Apeiyyf Islegb Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: novo, Leto izdelave: 2025, Kartonhülsenschneidemaschine für Toilettenpapierrollen Technische Daten • Kartonbahnbreite: 60 - 76 mm • Produktionsgeschwindigkeit: 35 - 40 m/min • Hülsendurchmesser (innen): 40 mm - 80 mm • Lagenanzahl: 2, 3, 4 Lagen (weitere auf Anfrage) • Schnittlänge: 600 - 2900 mm Ausstattung / Merkmale • Betrieb wahlweise mit Heiß- oder Kaltleim • Wechselbare Dornsysteme (für unterschiedliche Hülsengrößen) Fgedsit N Rvjpfx Apljb • Quetschschnitt durch zwei oder drei rotierende Messer mit synchronisierter Bewegung • Stufenlos regelbare Geschwindigkeit – elektronisch (Drehstrom/3-phasig)

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HABERMEHL Anlagenbau GmbH Naslov: Hauptstr.1, 35510 Butzbach-Ebersgöns, Nemčija Tip: EH 400/1 Serijska številka: 901 Letnik: 2004 Napetost / frekvenca: 400 V / 50 Hz Nazivna moč: 3 kW CE-certifikat: Da 🛠️ Opis naprave Industrijski drobilnik oz. granulator (shredder/granulator). Značilne lastnosti na fotografijah: Sistem z rotacijskimi noži (drobilna enota) na 2-mm gredi 3 kW SEW motor z reduktorjem 8 mm sito (na situ označeno: „8 mm Sieb“) – določa velikost izhodnih delcev Premična, transportna konstrukcija Posoda za izpust materiala in spodnja motorizacija Takšni stroji se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Les Fsdpfow Niuhsx Apljgb Lahki kovinski ostružki Elektronski odpadki 📝 Tehnične informacije, ki jih lahko zahtevate Za dodatne informacije se lahko pri dobavitelju ali proizvajalcu pozanimate za naslednje podrobnosti:

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Data: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm • Heating: electric, connection load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones • Housing temperature measurement points: 6 • Material temperature measurement point: 1 • Material pressure measurement point: 1 Barrel Configuration: • Feed barrel with liquid addition port • Open barrel with insert and 2 liquid addition ports • Multiple closed barrels with openings for liquid addition or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive and process sections mounted on a sturdy base frame Areas of Application: • Plastics compounding • Masterbatch production Fgedpfjycuuysx Aplob • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Operating Time: According to the operating hours counter, the machine has run for less than one year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: Upon request, we offer design and installation of suitable tooling, e.g. strand dies, as well as integration of additional peripheral equipment such as screen changers, pelletizing lines, dosing equipment, or other customer-specific components. The machine can thus be individually configured according to customer requirements and delivered ready for operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Inca Onset X2, 3/4-automatisiert Farbkonfiguration: 8-Kanal-Drucker mit vier Farben (CMYK) Nur 1/12 des Neupreises!!!!! Druckkopfstatus ermöglicht Drucken mit maximaler Geschwindigkeit und hervorragender Qualität – bis zu 140 Bögen/Stunde bzw. 700 m²/Stunde. Austausch von 60 Druckköpfen erforderlich (ca. 45.000 €). Fgodpfoun Swbjx Apleb Die Maschine befindet sich in exzellentem Zustand und wurde seit dem ersten Tag vom Hersteller gewartet. Die jährliche Wartung erfolgte im Mai 2025. Verfügbar: Januar 2026 Mit dem Wachstum des Geschäfts bietet die Onset X2 die nötigen Kapazitäten, um das Aufgabenspektrum des Betriebs zu erweitern. Die Integration eines zweiten CMYK-Satzes erhöht die Produktivität weiter – bis zu 707 m²/h* (entspricht 138 Vollformat-Bögen pro Stunde). Optional können sechs Kanäle mit Light Cyan (Lc), Light Magenta (Lm), Weiß (W) und Orange (O) für noch mehr Flexibilität und erstklassige Druckqualität belegt werden. Je nach spezifischen Anforderungen des Druckjobs lassen sich uni-direktionale, bi-direktionale sowie Super-High-Quality-Druckmodi auswählen. * Basierend auf einer ungefähren Materialwechselzeit von 6 Sekunden. Demontage, Transport, Installation, Schulung und Gewährleistung sind (innerhalb Europas) inklusive. Weitere technische Einzelheiten entnehmen Sie bitte dem beigefügten Datenblatt.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.700 mm, Kryma SK2800 avtomatski utorač z avtomatskim vakuumskim podajalnikom, stroj je bil zelo malo rabljen, je v odličnem stanju in je na voljo takoj. Hitrost je približno 2000 kosov na uro. Stroj lahko obdela liste do dolžine 10 m. Video je na voljo na zahtevo. Na voljo je tudi Kryma ploski rezalni stroj (flat bed roller die cut), praktično kot nov, ter Sunthinks SC860 enoprehodni tiskalnik z avtomatskim podajalnikom. Fsdpetth Iaofx Aplegb * Možna je organizacija prevoza po vsej Evropi, ponudbo s prevozom vključimo po dogovoru.

Stanje: dober (rabljeno), Loypack One Shot dozirni stroj za čokolado Fgedomqm E Uepfx Apleb Stroj iz nerjavečega jekla za one-shot vlivanje, dvojni lijak prostornine 100 kg, modeli se vstavljajo v razločevalnik, nastavljivo temperaturno upravljanje, spremenljiva hitrost, ogrevan vodni rezervoar, vključuje več kot 300 različnih modelov za izdelavo napolitank, trifazni priklop.

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Fgjdofg Rlcopfx Aplob Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.