Linija za premaze za majhne profile

PMH GmbH EX30-28

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Isdpfxexdc Ups Af Tsal Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, inspection on site possible.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 24 meseci, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2027, skupna dolžina: 1.230 mm, skupna širina: 750 mm, skupna višina: 1.320 mm, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, moč: 5,5 kW (7,48 KM), električna varovalka: 20 A, Spiralni mešalnik SM2-80 T Mešalni stroj z dovršeno in robustno tehnologijo! Digitalno upravljanje Easy Touch s tipko za vzvratni hod VRHUNSKI stroj za testo s 3 časovniki 1 mešalni in 2 napredna programa za min/max. 6 - 80 kg testa enostaven pokrov proti prašenju moke Nerjaveča posoda in spirala Stroj je premičen s 4 zavornimi kolesi Iodpfxouir Afj Af Toal samo pri nas DGUV V3 testirano Priključek 400V, 16A-CEE vtič Mere: 750 x 1230 x 1320/1800mm, ŠxGxV NOV stroj, preverjen pri SAB 24 mesecev garancije + servis rezervnih delov Opcije: Leasing & najem Vzdrževalna pogodba Dostava Servisni paket E-Box Uvajanje & zagon z mojstrom pekarstva Velika zaloga vrhunskih spiralnih mešalnikov!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, 8x Caviete Isdsh Rwlqjpfx Af Tjal Kanisterverschluss Baujahr ca. 2003

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Iodpfjqfcvijx Af Tsal Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch en senzor tlaka taline Iajdpfx Afouxa Abs Tsl krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje ta ekstruder je bil funkcionalno preizkušen! Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Leto izdelave: 2023, Stanje: zelo dobro (rabljeno), RIETSTACK IRS modularna oprema - IRS 430 Maksimalna širina materiala: 420 mm Maksimalna mehanska hitrost: 200 m/min Električna priključitev: 3x400V, 50 Hz (5P-32A) Stisnjen zrak: 6 bar Modul za odvijanje opremljen z: - Pnevmatska odvijalna osovina – 76 mm - Največji premer odvijanja: 800 mm - Mikroprocesorski sistem za upravljanje - Elektronski števec (etikete/metri) - Spojna miza z dvema pnevmatskima vpenjaloma - Precizna nastavitev napetosti traku pri odvijanju in navijanju - Elektronska korekcija napetosti traku med odvijanjem - Detektor zastavic - Samodejna zaustavitev ob koncu role - Enota za ravnanje materiala (de-curl-bar-unit) Vodenje traku: BST Spojna miza z dvema pnevmatskima vpenjaloma Modul za izsekovalno postajo - Prilagojen za delo z magnetnim valjem BOBST M5 - Standardna izsekovalna postaja (vključno z navijanjem podloge) Maksimalna obdelovalna širina magnetnega valja: 420 mm Razpon ponovitev magnetnega valja: 96T–220T Vključen en magnetni valj: 96T Izsekovalna enota gnana s servo pogonom Snemač (nit) z gnano servo osjo Navijalna osovina za podlogo (matrix) z neodvisnim servo pogonom Navijalna osovina za podlogo (matrix) – 76 mm Maksimalni premer navijanja podloge (matrix): 600 mm Pnevmatski pritiskalni valj za podlogo (matrix) Hidravlični merilnik tlaka – 2 prikaza Predelana tlačna mostična konstrukcija za dvig magnetnega izsekovalnega valja brez dvigala in za preprosto montažo izsekovalne plošče. Iedpfexc Ivpex Af Tsal Pnevmatski pritiskalni valj za podlogo (matrix) Neprekinjeni izhodni zlagalnik (nonstop stacker), do 4 toka hkrati Transportni trak za izhod, servo motor, vakuumski trakovi in vakuumska črpalka Simco antistatična letev – 3 kos Največja širina: 420 mm Največja dolžina zloženke: 630 mm Največja višina zloženke/sklada: 120 mm Največja hitrost zlaganja: 80 m/min Višina sklada nadzorovana z avtomatskim štetjem pol Hitrost je odvisna od materiala Samodejno odlaganje skladov s potisnim sistemom Zlagalnik deluje v popolnoma avtomatskem, neprekinjenem načinu Minimalna velikost za izdelavo skladov: 50x50 mm Manjše etikete je mogoče zbirati na koncu transportnega traku Električna priključitev: 3x400V 50Hz (5P-16A) Stisnjen zrak: 6 bar Upravljalne plošče z zasloni na dotik (HMI)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Grafisk Maskinfabrik tilbageruller/skærer Iajdpfsipvhnsx Af Tjl

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), VAN DAM 568 COM III 8-Colour Cup Printer 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Machine type: Cup printing machine Iajdpfx Afsh Ha I Ej Tel Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions regarding the machine or its specifications, please feel free to contact us at any time.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Isdpfx Afshigmbj Tsal Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Leto izdelave: 2021, Stanje: novo, - 4 rolls - Capacity: 1570 x 9 mm - Hardened rolls - Top roll diameter: 200 mm - Bottom roll diameter: 200 mm - Side roll diameter: 180 mm - Hydraulic system Iodpfjgg N R Hex Af Teal - Digital display for the movement of the left roll - Digital display for the movement of the central lower roll - Digital display for the movement of the right roll - Top roll hydraulically foldable - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up/down movement system for central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V