Laboratorijski iztiskalnik

PMH GmbH EX-20-25l/d

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning Bledpfx Afofzktzjnjd The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines Bsdoiyyf Iepfx Afnold with single-screw or twin-screw extruders.

Stanje: rabljeno, Infeed cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Bjdpfx Ajbq Stqsfneld Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutter plates on tool holders Screen construction: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Leto izdelave: 2010, obratovalne ure: 29.000 h, Stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Bsdpfoxykcgjx Afneld Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Closing force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Tie bar spacing: 221 mm Distance between mounting plates: 350-500 mm Mould mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Bedjuykh Dspfx Afnjld Operating hours: 34,748

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW Blodpfx Afsrg Ebcsnjd - Slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / take-off unit - Control system

Stanje: zelo dobro (rabljeno), Boy 80M Bsdpfx Ajmt Hh Eefnsld Baujahr 1998 Schließkraft: 80 Tonnen Schneckendurchmesser: 36 mm Schussgewicht: 132 g Holmenabstand: 410 x 358 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.210 h, This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in the machine storage facility. The machine is from 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm Bljdotpf N Uspfx Afnod – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Bjdpfjhx Elfjx Afnold Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Bedpfx Afed S Uf Sjnold Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.