Varilna linija za ekstrudiranje žice/profilov

PMH GmbH EX 30

Leto izdelave: 2025, Stanje: novo, 30 mm extruder with crosshead for small sheathing projects, complete with cooling tank, haul-off, and winder equipped with traversing unit. Fsdpfx Afsf Uc Uroljpb

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Unit Type: HSK7471-90-40P (x3) Flow rate: 250 m³/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Unit dimensions: 4500 x 1200 x 2300 mm Thermofin Condenser Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 kW Air flow: 354,000 / 281,000 m³/h Number of fans: 12 x 1000 mm Unit dimensions: 11,800 x 2300 x 1600 mm Volume: 276 L Weight: 2,400 kg Fsdpfxspgy Ixo Aflepb Control Cabinet Dimensions: 2400 x 600 x 2000 mm We offer a wide range of other refrigeration equipment, including condensing units, compressors, coolers, condensers, chillers, cold rooms, refrigeration and catering furniture, as well as machines and devices for restaurants and meat processing. Check out our other listings or call us— not everything is listed on Machineseeker.

Stanje: rabljeno, številka stroja/vozila: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-knife rotor Fodpfxsghgmzj Aflepb 4 rows of stator knives Feed opening approx. 250 x 600 mm Drive motor 37 kW

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Voortman V808 CNC nosilna linija za obrezovanje – leto 2016 (REF: STK‐1549) Fedpelff H Esfx Aflepb Obrezovalni robot | Samodejni vstop in izstop materiala | 1,25 m segmenti | Valjčni podajalnik Kjellberg SmartFocus 300A plazemska enota | Donaldson sistem za odsesavanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, 8x Caviete Fpjdpfx Aoh Rwlqjflsb Kanisterverschluss Baujahr ca. 2003

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments Fpsdpfx Afoqt Dmyelob - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch en senzor tlaka taline krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje ta ekstruder je bil funkcionalno preizkušen! Fjdpfx Ajuxa Abjflopb Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: Fodohigmbspfx Aflspb High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: novo, Leto izdelave: 2024, Stroj za profiliranje kovinskih stebrov za vinograde se uporablja v vinogradih in sadovnjakih za proizvodnjo kolov in stebrov. Običajno so vinogradniški stebri debeline 1,5-2 mm. Proizvodna linija je sestavljena iz razvijalca (decoiler), servo podajalca-ravnalca, stiskalnice, orodja za vtiskovanje, stroja za profiliranje in giljotine. Fpjdjt Tcz Uepfx Afljb

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Fodpfohx Elfsx Aflepb Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.