Hidravlične enostebrične stiskalnice nakup rabljenega (61)

Stanje: rabljeno, Leto izdelave: 1981, Technical details: Pressure: 30 t Column clearance (WxD): 600/450 mm Installation height, table/ram at top position: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table surface (LxW): 500 x 700 x Ø 60 mm Ram clamping surface: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total power requirement: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Crodpfxou Nfmao Afwei Four-column press, hydraulic Deburring press Possible application: suitable as a deburring press Other technical features: - Table opening 200x250 mm - Opening in ram Ø 160 mm - Frame clearance width 600 mm and depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Pressure: 10 t Csdsu Nfudepfx Afwjri Throat depth: 255 mm Ram stroke - max.: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height: table/ram, top: 630 mm Installation height: table/ram, bottom: 230 mm Table clamping area: 420 x 400 mm Passage opening in table: 220 mm Ram clamping area: 200 x 200 x 65 mm Total connected load: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 1.1 x 0.5 x 2.1 m

Leto izdelave: 1991, stanje: rabljeno, Pressure: 100 t Throat depth: 380 mm Stroke: 300 mm Table area: 1700x700 mm Codpelp U Ayofx Afwori Ram area: 1400x700 mm Installation height: 650 mm Total power requirement: 30 kW Machine weight approx. 10 t Space requirements approx. 2400x3600x3400 mm Pressure- and stroke-dependent shut-off BWS for safety and cycle operation Fixed stop Pressure switch Rapid approach and working stroke Two-hand operation Approved for manual loading operations

Leto izdelave: 1991, stanje: rabljeno, Pressure 40 t Throat depth 320 mm Codpfelp U Avox Afwori Stroke 250 mm Throat depth 320 mm Table area 1400x600 mm Ram area 1200x600 mm Installation height 650 mm Total power requirement 22 kW Machine weight approx. 8 t Space requirement approx. 3200x3300x3300 mm Pressure- and stroke-dependent shut-off BWS for protection and automatic operation Fixed stop Pressure switch Rapid traverse and working stroke Two-hand operation Approved for manual loading/unloading operations

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then Credpfot Hw Dwex Afwei _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Stanje: rabljeno, Leto izdelave: 1990, Pressure 25 t Throat Depth 250 mm Stroke 100 mm Total Power Requirement 7.5 kW Machine Weight approx. 3,200 kg Space Requirement approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC Controlled Hydraulic C-Frame Press Model HZS 25 Year of Manufacture 1990 Serial no. H 90-2018 _____ Pressing Force (Ram) 25 t Cjdot Hw Ezopfx Afwjri Table Size 620 x 460 mm Table Height above Floor 820 mm Through Hole in Table 100 mm Maximum Installation Height 350 mm Throat Depth 250 mm Ram Stroke approx. 100 mm Ram Surface Area 500 x 350 mm Ram Bore 32 mm Working Speeds: Rapid Advance/Retract 400/400 mm/s At Partial Load / At Full Load 50 / 18 mm/s Total Drive Power approx. 7.5 kW - 380 V – 50 Hz Weight approx. 3,200 kg Machine Dimensions (L x W x H) 1,000 x 1,700 x 2,600 mm Accessories / Special Equipment: • DUNKES program control type CNC 100 with data entry panel for pressure setting, pressure/time switching, stroke upper/lower limit, rapid traverse and working speeds, as well as with digital display for press force, ram travel, pressing time, program number. Storage of up to x tool programs, SIEMENS S5 PLC, teach-in button • Hydraulic shock absorption installed in press cylinder • SICK – light curtain and two-hand safety control, • Intermediate tables mounted, control cabinet fitted • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm Condition: good to very good – can be demonstrated under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We always have a selection of hydraulic presses in stock, please contact us for further options.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 100 t, Durendus DCD-100 – Hydraulic Deep Drawing Press, C-Frame, 15–100 t, 800 × 600 mm For sale is a single-column hydraulic press with deep drawing functionality (C-frame, C-type press) from manufacturer Durendus, featuring an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep drawing, and assembly processes, and is equipped with an integrated deep drawing cushion and a modern Siemens control unit. Thanks to high travel speeds and precise control, it is suitable both for series production and for flexible single applications. ==== Technical Data & Information: Hydraulic Single-Column Press – DCD-100 ==== General Information - Manufacturer: Durendus - Model: DCD-100 - Type: C-Frame / Single-Column Press - Pressing Force: 15–100 t (adjustable) - Total Weight: approx. 6,500 kg - Overall Dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table Height Above Floor: 1,000 mm ==== Working Area - Max. Distance Table to Ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table Size: 800 × 600 mm - Ram Size: 800 × 600 mm - T-Slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Idle Speed: 180 mm/s - Working Speed: 22 mm/s - Return Speed: 180 mm/s ==== Hydraulics & Drive - Operating Pressure: max. 250 bar - Main Pump: Bosch Rexroth, approx. 65 l/min - Motor Power: 11 kW + 1.5 kW - Oil Tank Volume: approx. 280 l - Hydraulic Block: Duplomatic - Filter: Filtrec - Cooling: Air cooler ==== Additional Functions - Deep Drawing Cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ejector in Ram: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch Panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning Accuracy: up to 0.1 mm - Remote maintenance possible ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operating states via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep drawing, forming, assembly work, punching processes, series production, toolmaking Single-column press, C-frame press, deep drawing press, hydraulic press, industrial press, tool tryout press Credpfx Afsyw I T Hjwoi Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety regulation NR 12, which builds upon these standards. Our core strength lies in custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. Our presses mainly use components from leading European manufacturers for their hydraulics.

Stanje: rabljeno, Technical details: Pressure: 0.9 t Installation height: Table/ram at top: 350 mm Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Cedpfx Afou Nfw Sowori Height above floor: 935 mm Machine weight approx.: - t Machine dimensions approx. LxWxH: 1.2 x 0.8 x 2.1 m Punch holder with M24x60 mm internal thread Hydraulic unit Röhm-Gamet, type 1E1 HS299, pressure 38 bar, tank capacity approx. 50 litres One-hand operation

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left Crsdpsd Egc Aefx Afwoi X1- + R-/ X2- + R-axis on linear guide Y1- + Y2-axis Hydraulic upper tool clamping Pneumatic sheet follower device + front stops on linear guide Second two-hand operation Universal die 100x100x5'100 mm Gooseneck blade 280 x 5'100 mm Die centering plate, b = 111 mm

Stanje: rabljeno, Leto izdelave: 1992, Pressure: 75 t Throat depth: 280 mm Stroke: 303 mm Total power requirement: 15 kW Machine weight approx.: 7,000 kg Space requirements approx.: (dimensions not specified). Hydraulic C-frame press, Type HZS 75 Year of manufacture: 1992 Serial No.: H 92-2249 _____ Pressing force of the main ram: 75 t Table size: 750 x 515 mm Table height above floor: 820 mm Pass-through hole in table: 300 x 200 mm Max. installation height: 500 mm Throat depth: 280 mm Stroke of main ram approx.: 303 mm Ram area: 500 x 400 mm Ram bore: 50 mm Total drive approx.: 15 kW - 380 V - 50 Hz Weight approx.: 7,000 kg Overall machine height: 3,850 mm Accessories / Special features: - DUNKES program control type PC 10 with data input panel for pressure adjustment, pressure/time switch-over, top/bottom stroke, rapid traverse and working speeds, with digital display for pressing force, ram position, pressing time, program number. Memory for up to 30 tool programs. PLC: SIEMENS S5, teach-in button. - Press ram guided by adjustable prism strips. - Hydraulic shock absorption (cut/shear damping) mounted in the press cylinder, 15 mm. Crsdpfx Afjt Hwrzewoi - Motorized depth stop and shear damping adjustment. - Double sheet detection = maximum pressing force applied only after reaching the pre-set stroke. - Hydraulic die clamps (4) on the table, hydraulic pin clamping in the ram, hydraulic ejector in the ram, 3 t/15 mm. - Two-hand safety release, electrical and infinitely variable return stroke limitation. - Overrun monitoring devices (NKS), ram switching of the main piston. - Attached control cabinet, connection for oil cooler, etc.

Leto izdelave: 1979, stanje: rabljeno, številka stroja/vozila: 3534, Pressing force: 630 kN Return force: 100 kN Maximum ram stroke: 200 mm Installation height: 400 mm Crodob Hk Dzopfx Afwsi Throat depth approx.: 350 mm Table size: 610 x 800 mm Passage hole in table: 100 mm Ram bore: 40 mm Ram advance speed: 350 mm/s Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t