Posamezen stolpec hitrega gibanja tiska

NEFF CHS 60

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m Bodpfx Agjcxxyco Tscw High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Bcsdsfxyhfepfx Ag Tsw Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new condition * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional fieldbus interface and IIO3 card available Bcedjqfguajpfx Ag Tsw * 2 units available

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Bedpfxjhy Tp Dj Ag Tscw Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), TRIULZI-IG glass tilting table Hydraulic Equipped with steering castors The rollers lower to enable 360-degree movement of the glass (for sealing purposes). Length: 3600 mm, Working height: 2400 mm Good working condition Good overall condition As is Bjdpfoiy Dtbex Ag Tocw Immediately available

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Bedpogw Scqofx Ag Tjcw Right Discharge 5 Sorting Bins Total Length 26 Meters 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Bcjdpfx Agewp D Nbe Tsw Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: dober (rabljeno), Comprising: - 3 tanks, 18,000 litres each - 3 tanks, 15,300 litres each - With walkway system - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manway DN 400 (cylindrical part) Bsdpsib H Ddofx Ag Tjcw - Residual outlet, ball valve Ø 40 Friedrich No. 2 - Clear drain, ball valve Ø 40 Friedrich No. 2 - Sampling port - Transfer line with ball valve Ø 40 Friedrich No. 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, fitted with a removable sieve cylinder insert (for keeping the mash cake moist) Dimensions: - 3 tanks, 18,000 litres: Ø 2000 mm, height 5600 mm - 3 tanks, 15,300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Leto izdelave: 2011, Stanje: dober (rabljeno), Special price: 1 used, well-maintained turning device designed for a load capacity of 300 tons, consisting of: 1 powered unit 1 idler unit with the following technical specifications: Model: PR 3000 SB Total loading capacity: 300 t Load per unit: 150 t Roller diameter/width: 850 x 250 mm; Roller material: steel Roller axis height: 778 mm from the bottom edge of the machine frame Rotational speed: 65–1,230 mm/min, continuously adjustable Bodpfsfn Hmzsx Ag Tjcw Support diameter: 1,000–9,000 mm Electrics: Control cabinet mounted rigidly to the machine frame of the drive unit Control: cabled remote control Connection voltage: 380/400 V, 3-phase, 50 Hz The system is also available for rent (trial rental).

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left X1- + R-/ X2- + R-axis on linear guide Y1- + Y2-axis Hydraulic upper tool clamping Bcjdped Egc Asfx Ag Tsw Pneumatic sheet follower device + front stops on linear guide Second two-hand operation Universal die 100x100x5'100 mm Gooseneck blade 280 x 5'100 mm Die centering plate, b = 111 mm