CNC klopi

Hastastar/Hatabur Hatastar POP 50500

Stanje: dober (rabljeno), Preša za upogibanje Znamka: AMADA Gijdpfx Ajwivddjfqjl Tip: HFT 80/25 Kapaciteta: 2500 x 80T 4 osi Razdalja med stebri: 1800 mm Dimenzije: 3500 x 1500 x 2100 mm Teža: 6.500 kg Opremljena z novimi in rabljenimi orodji

Stanje: pripravljen za uporabo (rabljen), Bobenski motorji rabljeni bobenski motorji velika zaloga za širino traku 300-1400 mm Gisdei A Apuepfx Afqsl

Stanje: rabljeno, številka stroja/vozila: 51568, Pressure: 100 t Stroke: 0–500 mm Table surface: 800 x 650 mm Ram surface: 800 x 600 mm Table through-hole: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Gedpfx Afecxxrrsqjil Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with ram at top dead center. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 mm/s, Overrun distance: 44 mm.

Stanje: dober (rabljeno), številka stroja/vozila: 202 0239, Direct current control range: 25 - 190 A Alternating current control range: 25 - 190 A Direct current at 60% duty cycle: 190 A Direct current at 100% duty cycle: 160 A Alternating current at 60% duty cycle: 170 A Alternating current at 100% duty cycle: 160 A Required space: 1200 x 600 x 800 mm Gijdpfx Afecvbu Rsqel Weight: 300 kg

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. Giedpexddvnjfx Afqsl 125 kg auxiliary crane on the headstock.

Stanje: pripravljen za uporabo (rabljen), Sertom brand hydraulic plate rolling machine, length 25,000 mm with loading feed, 2 lower rolls of 300 mm, upper roll of 318 mm, plate thickness capacity 14 mm. 22 kW for rotation, 5.5 kW for movements, 2.5 kW for support structure. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Gsdpfx Aenr Npyjfqjil

Leto izdelave: 2008, obratovalne ure: 9.750 h, Stanje: rabljeno, M2 GmbH offers you the following machine: - Piling and drilling rig RTG RG 25S - Upper carriage: Sennebogen BS 80 R - Engine: CAT C18, 570 kW - Optional: Vibratory hammer MR 125 V, rotary drive KDK 232 S, double head system DKS 100/200 - Features: Vibratory installation, Kelly drilling, and SOB drilling Gijdpfx Aoh Tyz Aofqol The machine is in excellent condition and immediately ready for operation.

Stanje: novo, Leto izdelave: 2021, Bernardo AKPL 1600 x 40 Press Brake Technical Data: Pressing force: 40 t Bending length: 1600 mm Distance between uprights: 1200 mm Stroke length: 100 mm Back gauge: 0 – 500 mm Throat depth: 200 mm Table width: 150 mm Table height: 760 mm Approach speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec Oil tank capacity: 130 litres Motor power: 4.0 kW Width: 2050 mm Depth: 1800 mm Height: 2030 mm Weight approx. 3,030 kg Gjdpfx Aeftuywefqoil

Stanje: rabljeno, Technical Details: Ram stroke - max.: 250 mm Workpiece diameter - max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Machine weight approx.: 2.1 t Gijdpfxjw Au I Ie Afqjl Various accessories

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Technical Specifications: Working length: 4300 mm Distance between uprights: 3230 mm Pressing force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat depth: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Gijdpfx Aswl U Rhofqel Weight: approx. 29.5 tons Condition: Very good condition, around 30,000 operating hours The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and signs of wear are consistent with its age; used machines are sold without any warranty.