Enoslojna stiskalnica - hidravlična

EIGENBAU

Stanje: rabljeno, z zalogovnikom x z vibracijskim sistemom x tehtnica x demontirano x oprema za polnjenje big bagov Ksdpfx Aoip Rdlof Nsll +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega ni možna predstavitev pod napetostjo ali izdelava videoposnetka. Naš oglas vsebuje najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: novo, Leto izdelave: 2025, dolžina tračnega lista: 3.920 mm, širina tračne žage: 34 mm, Double Column Fully Automatic Bandsaw Everising H-260 HB Cutting range round: 0 - 260 mm Cutting range square: 300 x 260 mm Bundle clamping width: 145 – 190 mm Bundle clamping height: 30 – 130 mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1 mm Weight: 1759 kg Machine dimensions: 2170 x 2100 mm The standard equipment of the machines is as follows: - Sturdy steel construction with double-column design - NC feed system Kledpfxjq Ulxys Af Nol - Infinitely variable, frequency-controlled cutting speed (inverter-controlled) - Digital cutting speed display - Hydraulically operated double horizontal vices - Hydraulic saw blade tensioning - Saw blade guides (including back guide) made of carbide - Hydraulically pre-tensioned blade guides - Precision PLC control system for all hydraulic and electrical components - Cut counter with automatic shut-off - Automatic out-of-stock shut-off - Multi-job function - Bundle clamping device - Powered chip brush - Automatic blade breakage control incl. emergency shut-off - Chip flushing pistol - Flexible work lamp - 2-metre roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cut deviation monitoring Extensive and complete German documentation.

Stanje: rabljeno, Turning tool with indexable insert jaws, clamping holder, turning tool steel, indexable insert holder, turning blank, indexable insert steel, internal diameter boring bar, turning tool holder, boring bar Kjdpfx Ast Acyief Noll -Turning tool: Internal diameter boring bar with indexable insert -Type: Length 520 mm Ref. no.: 701-12-201119 -Dimensions: 520/40/33 mm -Weight: 4.3 kg

Stanje: rabljeno, Deburring machine, hole deburrer, bore deburrer, deburring tool Kedjb U Izpopfx Af Nell - Drive power: 0.30 kW - Countersink - Speed: 585 rpm - Dimensions: 500/300/H460 mm - Weight: 31 kg

Stanje: rabljeno, Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate Kedpfx Asfc T Tqjf Nell - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg

Stanje: dober (rabljeno), Polishing-grinding bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinder, pedestal grinding bench - Drive: 2.2 kW - Speed: 1420 rpm - Mounted brush: 150 mm - Dimensions: 700/800/H1300 mm Klodpod D R Sxefx Af Njl - Weight: 73 kg

Stanje: rabljeno, Technical details: Number of drawers: 2 Tool holder taper: SK40 Weight: 362 kg Kljdpfxju Nkzpo Af Njl Dimensions (L x W x H): 0.42 x 0.69 x 0.51 m Tool rack including milling tools similar to those shown in the image. As per illustration.

Stanje: novo, The KNWP 50 M is a precision workshop press in the Workshop Presses category and belongs to the group of manual workshop presses. These high-quality hydraulic presses, manufactured in Europe, are ideal for general assembly and straightening work as well as for testing workpieces. They offer safety and professional handling, making them the perfect choice for mechanical workshops, garages, and metalworking shops. The KNWP 50 M is designed for repair and assembly tasks such as pressing in and out bearings and straightening shafts. The machine features a maximum pressing force of 50 t and a total ram stroke of 160 mm. Thanks to its well-engineered design, it enables both manual and foot operation, as well as a height-adjustable worktable system and a multifunction die for straightening flat material. Invest in this robust and powerful workshop press from KNUTH and equip your workshop with professional-grade equipment. Order now! Kledpfsuyh Twsx Af Nsl

Stanje: rabljeno, The custom-built PUR perfect binder is a specialized binding machine designed for precise and efficient bookbinding. Manufactured by Eigenbau, this machine features a glue binding mechanism using PUR adhesive (polyurethane reactive adhesive), which ensures a permanent and high-quality bond. The machine accommodates a format of 100 mm and is currently available from stock. It is located in Germany, and pricing is available upon request. Delivery terms are FCA (Free Carrier), meaning the seller delivers goods cleared for export to the carrier designated by the buyer. Key features of the Eigenbau perfect binder include a centering function for accurate alignment, a heated roller for optimal adhesive application, and a miniature circular saw for precise trimming. Additionally, the machine is equipped with a paper unwinding mechanism and a PLC (programmable logic controller) for automatic operation. For an additional EUR 1,500, an optional INATEC BS 25002 PUR system is available to further enhance the binding process. The machine comes with an infeed station that includes a lifting platform for efficient material handling. Format: 100 mm Equipment: - Centering function - Heated roller - Miniature circular saw - Paper unwind - PLC control - Optional INATEC BS 25002 PUR (additional 1,500 EUR) Klodpfx Afovfx Rtj Nel - Infeed station with lifting platform

Stanje: dober (rabljeno), Dowel boring machine, line boring machine -Support table: 2200 mm -Multi-spindle head: 5 drills -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable Kjdob A Hd Hopfx Af Nsll -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. Ksdpfefxyhfsx Af Nsll In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Kjdswki Apspfx Af Noll Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Feed hopper approx. 10 m³ with adjustable dosing conveyor 2 transport conveyors (one of which is flexible) Kodpfxsv Scaxe Af Noll Mounted on a 3-axle chassis Powered by ENDRESS generator set, 45 kVA,

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: 5.5 kW Kjdpsggbuhjfx Af Nell Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: rabljeno, Adjustment unit with 2 adjustment tables featuring handwheel adjustment – made from aluminium system profile Linear unit, linear axis, loading unit, linear guide Manufacturer: Proprietary build Year of manufacture: 2000 Travel length: 3600 mm Travel path: 2750 mm Table size: 590 x 355 mm Usable table surface with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guidance) Kodpfxsxf Uq Es Af Njll Aluminium system profile rail, cross-section: 123 x 120 mm (front) Height to upper edge of tabletop above floor: 640 mm Height to upper edge of linear guide carriage above floor: 615 mm Height to upper edge of aluminium system profile 80 x 80 mm above floor: 575 mm - Robust, torsion-resistant construction made from 80 x 80 mm aluminium system profile and steel feet - For the handwheel adjustment, the rack is bolted to the aluminium system profile rail - Handwheel adjustment via gear and rack, separately for each table - Spring-loaded index bolt for fixed indexing, released via hand lever - Adjustable index plates on the aluminium system profile rail - Standard linear guide, width = 28 mm, height = 26 mm Overall dimensions (L x W x H): 3640 x 900 x 780 mm Weight: 450 kg Good condition