Hidravlične enostebrične stiskalnice nakup rabljenega (65)

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Kljdpfov Rwu Uox Adkep Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE standard. Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), two-hand operation.

Stanje: zelo dobro (rabljeno), Pritisk 16 t Teža stroja pribl. 16 t Opis sledi! Kodpeyrhmhsfx Adkslp

Stanje: dober (rabljeno), Leto izdelave: 1975, globina grla: 400 mm, stiskalna sila: 250 t, širina mize: 750 mm, dolžina mize: 1.000 mm, skupna masa: 16.000 kg, širina plošče bata: 500 mm, dolžina plošče bata: 630 mm, Tiskalna sila: 250 t Iztek: 400 mm Hod: 30...140 mm Velikost mize: 1000 x 750 mm Prehodna odprtina v mizi: 360 x 400 mm Površina batnice: 630 x 500 mm Nastavitev batnice: 110 mm Kedpfx Adoyvyw Iekslp Skupna potrebna moč: 18 kW Masa stroja pribl.: 16 t

Stanje: dober (rabljeno), Leto izdelave: 1994, Tlačna sila: 250 t Klsdsyvywujpfx Adkep Iztek: 360 mm Velikost mize: 1250 x 630 mm Premer mize: 250 mm Vpenjalna površina bata: 850 x 450 mm Vgradna višina: 800 mm Hod bata: do 500 mm Premer bata: 400/360 mm Hitrost bata navzdol: 200 mm/s Hitrost bata navzgor: 110 mm/s Skupna potreba po moči: 20,5 kW Približna masa stroja: 8 t

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2022, Funkcionalnost: nepreverjeno, številka stroja/vozila: 792-1017, širina mize: 300 mm, dolžina mize: 300 mm, hod: 20 mm, obratovalni tlak: 6 letvica, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 bodisi med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Maksimalni delovni tlak: 0,6 MPa / 6 bar Poraba zraka: 30 l/takt Takt: 20 mm Dimenzije mize: 300 x 300 mm Kedpfx Asyn Ef Hsdkslp PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 700 x 500 x 1150 mm Teža stroja: 150 kg Opomba: Orodje za stiskanje ni vključeno v dobavo. Zunanja referenca: Groven - Lot 11

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2732, skupna višina: 2.045 mm, višina mize: 850 mm, vgradna višina: 400 mm, skupna širina: 780 mm, skupna dolžina: 1.100 mm, globina grla: 265 mm, stiskalna sila: 50 t, širina mize: 450 mm, dolžina mize: 700 mm, obratovalna hitrost: 6 mm/s, skupna masa: 1.720 kg, hitrost vzvratne vožnje: 42 mm/s, pritisk: 320 letvica, Prodam rabljeno hidravlično enostebrično stiskalnico zaradi prenehanja obratovanja. Brez orodja. Kjdpfx Adjyrp E Sskolp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1977, Takoj na voljo na lokaciji: Hidravlična dvostebrična ravnalna stiskalnica Dunkes Tip: HDSR 75 Leto izdelave: 1977 Tlačna moč: 165 t 3 cilindri, tlačna moč posameznega: 75/65/25 t Miza: 1500 x 500 mm Hod: 350 mm Pogonska moč: 3 / 15 kW Teža: 6 t Cena: 2.750 EUR – brez DDV, iz lokacije. Ksdpfx Adoyvy S Sskjlp

Stanje: novo, Leto izdelave: 2022, stiskalna sila: 100 t, Estimated equipment weight: 3,500 kg Kljdpfx Ashmi T Uedkjp Equipment dimensions (W x D x H) (approx. external): 1,354 x 2,005 x 2,595 mm Table dimensions (work area) W x D (table size): Ø1,050 mm Daylight opening between table and hammer: 350 mm Hammer stroke (ram travel): 300 mm Drive power (power in kW): 14.24 kW Motor speed: 1,500 rpm Pump flow rate: 44.5 L/min Pump-motor displacement ratio: 27.59 cm³/rev Working force (cylinder output): 100 tonnes Return force: 10 tonnes Feed speed: 250 mm/s Working speed under pressure: 3–15 mm/s Return speed (lifting speed): 150 mm/s Working pressure (maximum): 210 bar Number of cylinders: 2 pcs. Rod diameter: 41.76 mm Cylinder diameter: 250.97 mm Cylinder stroke (ram travel): 300 mm Tank capacity (oil tank volume): 350 litres Suction cylinder: 5 tonnes Stroke of suction cylinder (ram travel): 150 mm

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: A2536805, stiskalna sila: 40 t, The described machine can be custom-built for you. The construction time is approximately 3 months from receipt of payment. Press force: 40 t Stroke: 250 mm Retracting force: 6.3 t Motor: 5.5 kW Open height: 450 mm Maximum approach speed: 90 mm/sec. Pressing speed: 10 mm/sec. Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Kodpfjfxyhfex Adkjlp Oil tank: 200 l Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. The accuracy is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in 0.1-second increments). The press pressure can be set in bar, corresponding to 10 to 40 tons. Further details regarding the control system: The control system can be locked via a key switch. The key switch has the following functions: Manual operation via two-hand control with 9.5 mm/sec. in setup mode (stops at any desired position by releasing the switches). Manual operation for bending tasks with up to 9.5 mm/sec. via two-hand control and automatic return to Top Dead Center (TDC) when releasing the two-hand buttons. Automatic mode for safe tools with up to 200 mm/sec. This function is labeled with a warning note on the control panel. In automatic mode, the machine is exclusively intended for use with fully enclosed and safe tools. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated using the two-hand control at up to 9.5 mm/sec. Bending operations can also be performed in setup mode. A key-operated selector switch is used to toggle between automatic and manual modes. Position adjustment for TDC and bottom dead center (BDC), as well as the switch-over position for speed reduction, is performed via sensors that can be adjusted along a chrome-plated rod. The sensor can be precisely fine-tuned using a lockable thread — accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, with two-hand control, can bend sheet metal. In automatic mode with safe tools, it can also be used for punching, notching, and bending.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za čeljenje in centriranje Tip: FZWD 160 Leto izdelave: 1978 Lokacija skladiščenja: Rostock Država: Nemčija Proizvajalec: WMW Saalfeld Vrsta upravljanja: Konvencionalno Teža stroja: 4 t Skupna priključna moč: 19 kW Dimenzije (D x Š x V): 3,1 x 2,59 x 1,7 m Premer obdelovanca: 20 - 160 mm Dolžina obdelovanca: 140 - 1.000 mm Teža obdelovanca: 125 kg Vpenjališče rezkalne glave: SK 50 Hitri pomik: 6.000 mm/min Hitrost vretena (glava rezkarja): 56 ... 280 min⁻¹ Podajalne hitrosti, brezstopenjsko: 15 ... 800 mm/min Maks. hod rezkalnega drsnika: 230 mm Ksdpfx Adsytitrekslp Maks. globina reza: 6 mm Za centrirne svedre: 4 ... 20 mm Podajalne hitrosti, brezstopenjsko: 15 ... 375 mm/min Maks. podajalna pot: 60 mm

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Pressing force: 3 t Ksdpfx Aeu Nfvbedkjlp Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster/riser plate: 355 mm Distance table to ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Drop-through opening in table: Ø 100 mm Ram speed, forward: 0.1 m/s Ram speed, return: 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor level: 800 mm Total power requirement: 1.5 kW Approx. machine weight: 370 kg Machine dimensions (LxWxH): approx. 0.8 x 1.2 x 1.9 m The C-frame press is mounted on a base table (welded steel sheet). Operation via foot switch. The press has been retrofitted with: - Reel holder for film with pneumatic feed and punching device - FIBRO punching device (plastic disc Ø 47.5 mm for punching) - Foot control

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Kljdpsu Nfvusfx Adkjp Manual counter i.O.

Stanje: rabljeno, Technical details: Pressure: 2.3 t Stroke: 280 mm Throat depth: 155 mm Maximum ram stroke - forward: 0.08 m/sec Installation height with bolster plate (ram/top): 355 mm Distance table/ram: max. 355 mm Bolster plate on table: 280 x 280 mm Kljdeu Nfwlspfx Adkep Through hole in table: Ø 100 mm Ram speed, forward: 0.08 m/s Ram speed, return: 0.32 m/s Ram pin hole: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Approx. machine weight: 0.5 t Approx. machine dimensions (LxWxH): 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test performed up to 2.3 t. Good condition.

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressing force: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance between table and ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Kedpfx Aow D Awmjdkelp Height above floor level: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m

Stanje: rabljeno, Technical details: Pressing force: 25 t Kedpfxju U D I Ro Adkelp Column width: 360 mm Stroke: 500 mm Installation height, table/ram top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke modes TÜV inspection valid until 05/2024 As is. *

Stanje: rabljeno, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Passage hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Further technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year Kjdpfou Nfuqex Adkjlp

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Klodeu Nfmyspfx Adkjp Throat depth: 270 mm Installation height: approx. 400 mm Table area: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Pin hole in ram: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-speed hydraulic press Robust welded frame construction. Mode selection via selector switch: inching, two-hand, foot or continuous operation with feed Press is equipped with a side-mounted piece counter EMERGENCY STOP switch With stroke limiter Press force adjustment possible With overload protection (pressure relief valve) With shock-absorbing system Light curtain SICK optical electronics prepared (can be reactivated as an option)

Stanje: rabljeno, Leto izdelave: 1978, Technical details: Press force: 160 t Ram stroke - max.: 500 mm Distance table/ram: max. 2,880 mm Ram speed, forward: 0.03 m/sec Ram speed, return: 0.04 m/sec Ram surface: W: 1,720 x H: 1,000 mm Ram diameter: Ø 259 mm Ram bore, center hole: Ø 180 mm Operating pressure: 260 bar total power requirement: 11.0 kW Machine weight approx.: 18.8 t Machine dimensions approx. LxWxH: 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Specifications on the counterblock: Size W: 1,720 x H: 690 mm Counterblock lower mount = Ø 225 mm x depth = 450 mm Horizontal manual displacement: max. length 2,880 mm Specifications for the guide cylinders: 2 opposing cylinders; size Ø 230 mm x length 3,350 mm, 7 cylinders separated by adjustment groove Ø 170 x 50 mm, manually repositionable using the adjusting ring Specifications for the support bed: Steel construction, welded with 2 guiding grooves 20 mm; size LxWxH: 4,000 x 1,400 x 200 mm Klsdpfx Adeu Nfq Ejkep

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Klodpfxevc Awxe Adkop Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Klodpfx Adou Nfudskop Pressure: 10 t Throat depth: 255 mm Ram stroke - max.: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height: table/ram, top: 630 mm Installation height: table/ram, bottom: 230 mm Table clamping area: 420 x 400 mm Passage opening in table: 220 mm Ram clamping area: 200 x 200 x 65 mm Total connected load: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 1.1 x 0.5 x 2.1 m

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 2.5 t Kledpfx Aderdlgiokep

Stanje: dober (rabljeno), Pressure 63 t Stroke -400 mm Installation height 700 mm Table size 1800x500 mm MARCELS MASCHINEN CH Klsdpfx Aech Dacodksp

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.620 mm, skupna širina: 850 mm, skupna dolžina: 1.869 mm, stiskalna sila: 30 t, širina mize: 600 mm, dolžina mize: 600 mm, skupna masa: 2.900 kg, Weight approx. 2,900 kg Table plate size 600 x 600 x 100 mm, plus 50 mm of free space behind the plate up to the press frame Table fixing points at 600, 800, 1000 mm Ram stroke 400 mm Kledpovhcykjfx Adkjp Motor 3 kW 60-litre hydraulic tank Downward speed 10 mm/s Upward speed 24 mm/s

Stanje: rabljeno, Technical details: Pressure: 0.9 t Installation height: Table/ram at top: 350 mm Throat depth: 295 mm Ram diameter: 40 mm Klsdpfx Adju Nfw Seksp Table size: 600 x 330 mm Height above floor: 935 mm Machine weight approx.: - t Machine dimensions approx. LxWxH: 1.2 x 0.8 x 2.1 m Punch holder with M24x60 mm internal thread Hydraulic unit Röhm-Gamet, type 1E1 HS299, pressure 38 bar, tank capacity approx. 50 litres One-hand operation

Stanje: rabljeno, Leto izdelave: 1981, Technical details: Pressure: 30 t Column clearance (WxD): 600/450 mm Installation height, table/ram at top position: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table surface (LxW): 500 x 700 x Ø 60 mm Ram clamping surface: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total power requirement: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Possible application: suitable as a deburring press Other technical features: - Table opening 200x250 mm - Opening in ram Ø 160 mm - Frame clearance width 600 mm and depth 450 mm - Operation via control panel Kjdpju Nfmaofx Adkolp Equipment: - Safety guard - Base plates