Enoslojna stiskalnica - hidravlična

WMW Zeulenroda PYE 25 SS

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, skupna višina: 27.500 mm, skupna širina: 10.500 mm, skupna dolžina: 16.500 mm, stiskalna sila: 25 t, širina mize: 630 mm, dolžina mize: 500 mm, obratovalna hitrost: 200 mm/s, skupna masa: 2.400 kg, hitrost vzvratne vožnje: 450 mm/s, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, razdalja med stojali: 800 mm, hod: 500 mm, moč: 12,5 kW (17,00 KM), Hydraulic Press PYE 25 SS. Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Dsdpjtzxvwsfx Ad Asup Specifications: - Maximum pressing force: 25 tons - Operating pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Daylight opening: 800 mm - Ram stroke: 500 mm - Descending speed: 200 mm/sec - Ascending speed: 450 mm/sec - Power requirement: 12.5 kW - Weight: 2,400 kg - Height: 2,750 mm, Length: 1,650 mm, Width: 1,050 mm The technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and operational testing of the machine are possible on site.

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Djdpfx Adefxyhfs Aeup Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2007, stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Dusdpommfwujfx Ad Ajp Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, FAT TUR 630AMN x 2000 Dodpfxsw Ecuuo Ad Aeup CNC Siemens 840D Letnik: 2010 Premer struženja (nad ležiščem): 630 mm Premer struženja nad suportom: 370 mm Dolžina struženja: 2.000 mm

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.200 mm, Mazak Quick Turn Nexus 350M CNC stružni center z Mazatrol 640T Nexus CNC krmilnikom Letnik: 2004.11 Dolžina struženja: 1.200 mm Maks. premer obdelovanca: 750 mm Standardni obdelovalni premer: 336 mm Maks. obdelovalni premer: 420 mm Duodpfox Dccysx Ad Aep Premer prehoda palice: 102 mm Maksimalno število vrtljajev vretena: 4000 obr/min 12-pozicijski revolverski nosilec orodja Kitagawa 12-palčna hidravlična triosna vpenjalna glava Konjiček Teža stroja: 7.500 kg Vključeno več različnih držal orodij v revolverju, 4 x gnana držala orodij in dodatna oprema. Oprema: 4 x gnano orodje Mazak držalo orodij Transporter ostružkov

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Dusdpfxsuddimo Ad Asp Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing

Leto izdelave: 1981, stanje: zelo dobro (rabljeno), Obročno ploščo premer 1300 mm Dujdpfek Dz N Isx Ad Asp maksimalni premer struženja 1100 mm obseg premera struženja 460–1250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 5.040 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 420 mm, premer struženja: 420 mm, hitrost vretena (min.): 35 obr/min, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 80 mm, pomik po osi Z: 1.250 mm, hitro pomikanje X-os: 33 m/min, hitri pomik na osi Z: 33 m/min, Premer palice (maks.): 80 mm, MAZAK QUICK TURN 300 Smart Operating Hours: Automatic Cycle: 5040 hours Condition: Very good condition, regularly serviced and continuously maintained! Capacity & Working Area Max. Swing Diameter: Ø 720 mm Max. Turning Diameter: Ø 420 mm Max. Bar Diameter: Ø 80 mm Max. Machining Length: 1200 mm Main Spindle Max. Speed: 4,000 rpm Spindle Nose: JIS A2-8 Rated Power (40% duty cycle): 26 kW Max. Torque: 750 Nm Turret Number of Tool Stations: 12 Tool Cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid Traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: Morse Taper NC axis, pressure controlled via M-codes Max. Axial Pressure: 10,000 N Dimensions & Weight Machine Dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran chip conveyor, hinged belt type Coolant pump 8 bar & chip flushing General Specification: SD MEMORY I/F(1P) + USB MEMORY I/F(1P) Mazak standard color NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with interlock switch Double foot switch Fully enclosed working area Work area lighting Safety features according to global standards Complete coolant system Chuck condition monitoring Automatic Tool Eye Dsdpfswzkvfox Ad Aeup 10.4" color monitor EIA/ISO package LAN interface

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Dsdpfxst Hwucs Ad Asup Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Dedsfcw Apspfx Ad Aoup Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm