Hidravlična stiskalnica

Hidralmac 40 T Einständerpresse

Pressure: 40 t
Stroke: 250 mm
Return force: 6.3 t
Motor: 5.5 kW
Max. working height: 450 mm
Max. rapid approach speed: 90 mm/sec
Pressing speed: 10 mm/sec
Travel distance - w: 250 mm
Ram plate: 500 x 200 mm
Table plate: 600 x 650 mm with T-slots
Table cut-out: 200 x 170 mm
Table height: 850 mm
Oil tank: 200 l

The described machine can be custom-built for you.
Production lead time is approx. 5 months after receipt of payment.

Rapid approach:
The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better.
Return:
The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better.

The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments).
Pressing force is adjustable in bars, corresponding to 10 to 40 tons.

Further details on the control system:
Operation can be locked via a key switch. The control key switch provides the following functions:

- Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.)
- Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons.
- Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel.

In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine.
In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation.

Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm.

The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.
Kwedpfefxyhfsx Abbet

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.