Hidravlična stiskalnica

VEB PRESSENBAU DESSAU PYXWM 160

Stanje: pripravljen za uporabo (rabljen), Erfurt PKZe 500/1000 trimming press Pressing force: 500 t Table dimensions: 1020 x 1420 mm Stroke: 400 mm Pjdpfx Aovbcxtendjgn Strokes per minute: 12 Main motor power: 41 kW Video available

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Volume: 1000 l, maximum temperature: 750°C, heating capacity: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Pgsdpfx Anew Emyzsden

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, General Information - Filling and Capping Combination Unit Bertolaso, year 2006 - Well-maintained system with annual inspection - Operating direction: left/right - Performance up to 8,000 bottles/hour Psdpeu A Imvefx Andogn 63-Station Clip-Type Inverted Bottle Rinser - Sterilization medium: ozone - Fully automatic sterilization prior to filling - Centrally adjustable infeed stars, easy infeed screw change 40-Station Vacuum Filler - Equipped with new gearbox - Centrally adjustable infeed screws - Easy infeed screw change - Fully automatic damping - Central height adjustment 6-Station Natural Corker - With separate cork feed 6-Head Screw Capper for BVS 30/60 and MCA 28 - Central closure cap feed - With central control station - Automatic rejection of defective bottles and collection station - Fully automatic star adjustment and easy screw change The filling and capping combination unit is immediately available and can be inspected by appointment at any time. Used machinery for the beverage industry – Hans Biedert

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation Psdpfxjtr U Hlj Andegn → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB Podpottah Rofx Andjgn → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: dober (rabljeno), 1 used drop press Manufacturer: SACK & KIESSELBACH Year of manufacture: 1962,74 Serial number: 31900 Pressing force: 630 t Stroke: 310 mm Shut height: 320 mm Working height: 1200 mm Drive power: 10 kW Psdpfxeul U Svj Andegn

Stanje: dober (rabljeno), Leto izdelave: 1980, Donewell press brake Type: 80-2500 Control unit: Cybelec CP 9220 Pressing force: 80 t Working width: 2540 mm Pedpfx Anoqgcqijdjgn Year of manufacture: 1980 Dimensions: 255x130x265 cm (LxWxH) Weight: approx. 6300 kg

Leto izdelave: 1985, stanje: rabljeno, Rabljen HUGH SMITH 1000-tonski hidravlični stiskalnik s 4 stebri, s premikom navzdol, naprodaj. Obratovalne hitrosti: 50 mm/sek. Gravitacijski približek: 6 mm/sek. Stiskanje: 50 mm/sek. Povratek. Delovna višina: 1060 mm. Pgedpsf A R Uzsfx Anden Teža stiskalnika: skupno 102 t. Towler Hydraulics. Stroj je bil izvorno zasnovan za premik navzgor (glej priložene originalne načrte), leta 1985 je bil predelan na premik navzdol in obnovljen (glej posodobljene načrte) z novo elektro opremo. Na voljo povsem novi hidravlični stiskalniki tipa C, H in D – lahko vam pripravimo konkurenčno ponudbo, izdelano po vaših specifikacijah. Novi 1000-tonski hidravlični stiskalniki so na voljo po naročilu.

Stanje: dober (rabljeno), Technische Daten: - Tischfläche: 400 x 1400 mm - Längsverfahrweg des Tisches (X-Achse): 1000 mm - Querweg des Tisches (Z-Achse): 450 mm - Vertikalweg des Tisches (Y-Achse): 400 mm - Spindelaufnahme: ISO 50 - Spindeldrehzahl: 35,5 – 1800 U/min Pedpjv E Nafofx Andjgn - Gesamtmaschinenleistung: 11 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 4.000 t, Ковашки чук SMERAL тип KJH 4 Пневматично-хидравличен ковашки чук с обратно действие (counterblow hammer). Тегло на плъзгача (рам), кг: 1’800 Номинална енергия на удара, кгм: 4’000 Psdpewbginofx Andegn Брой удари на плъзгача, 1/мин: 48 Ход на плъзгача, мм: 500 Площ за монтаж на матрицата, мм: 286 x 600 Минимална височина на матрицата, мм: 350 Мощност на главния двигател, kW: 45 Дължина на машината, мм: 3’100 Ширина на машината, мм: 1’900 Височина на машината, мм: 3’900 Тегло на машината, кг: 27’000