Stružnica z vodilno/pogonsko vreteno, premer struženja nad posteljo 300–399 mm nakup rabljenega (228)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Lhedpfx Ajwthbieh Den Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Lead and feed screw lathe Spindle bore: 76 mm Ledpfx Aheva Ef Ts Dshn Centre height: 220 mm Turning length: 3.00 m Multifix toolpost with 5 cassettes Coolant system Operating manual

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 360 mm, največja hitrost vretena: 2.300 obr/min, moč: 4 kW (5,44 KM), DR 180 S x 750 mm Lathe Conventional Precision Lathe with Infinitely Variable Speed Centre height: 180 mm Distance between centres: 750 mm Bed width: 250 mm Swing over bed: 380 mm Swing over cross slide: 245 mm Swing over bed gap: 500 mm Main spindle bore: 40 mm Main spindle mount: CAMLOCK D1-5 Spindle speed range: 0–2300 rpm Number of gearbox steps: 3 Main motor power: 4 kW Includes: 24 V LED machine lamp 3-axis digital readout FAGOR 40i TS with constant cutting speed "Multifix" quick-change tool post with 5 tool holders 3-jaw chuck AIRLOC Schrepfer machine mounts Machine available from stock for immediate delivery! Ledpotzkfkjfx Ah Dohn

Stanje: dober (rabljeno), Leto izdelave: 1998, Oprema: dokumentacija / priročnik, AVM Angelini Snupy Lathe The AVM Angelini two-axis lathe features a 42 mm bar capacity. The machine is equipped with a two-axis turret. Main specifications of the AVM Angelini model SNUPY lathe: - Chuck diameter: 210 mm - Center height: 190 mm - Distance between centers: 500 mm Ledpfx Aotu Hqcoh Dehn - Bar capacity: 42 mm - X axis travel: 275 mm - Z axis travel: 400 mm - X axis rapid traverse: 16 m/min - Z axis rapid traverse: 20 m/min - Spindle nose: ASA 5" - Spindle power: 15 kW - Maximum spindle speed: 3,500 RPM - CNC control: Fanuc Series 0-T - Year of manufacture: 1998

Stanje: novo, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Spindle bore ----- 38 mm Bed width ----- 203 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 kW Weight ----- 880 kg INCLUDES * 3-axis digital readout by SINO * Multifix TOOE5 quick-change tool post with 4 holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work light and coolant system * Fixed and travelling steady rest Lsdpfxsq E Iyzs Ah Dshn * Foot brake (CE) * Electric brake (CE)

Stanje: novo, Precision lathe with leadscrew and feed rod Manufacturer: GDW Model: LZ 280 VS comfortline Condition: New machine With infinitely variable spindle speed control and infinitely variable feed control meeting the highest safety standards Centre height: 165 mm Distance between centres: 670 mm Spindle bore: 43 mm Standard equipment includes: The latest display generation "comfortline" is already included in the base price and offers many innovations and conveniences: - 9'' TFT colour display - Technology storage for 99 tools - Oriented spindle stop via Teach-In button - Input for either constant speed or constant cutting speed (V = c) - Selectable speed limitation - Error and status messages in plain text - Feed and thread pitch input via image-guided interfaces - When thread cutting, no change wheels need to be exchanged or purchased additionally to cut all standard threads! Also included as standard: - LED machine lamp integrated in machine housing - Quick-change toolholder size A with turning tool holder - Leadscrew disengagement with key - Main drive brake system - Sliding chuck guard with limit switch monitoring - Removable chipguard rear wall - Movable splash guard - Pull-out chip tray - Simple bed stop (fixed longitudinal stop) - Central lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - 2 fixed centres DIN 806-MK 3 - Set of operating tools with tool pouch, set of wrenches, oil gun - 5 replacement shear pins - 2 operating manuals with spare parts lists, Lsdpfx Aocunqgoh Dohn electrical documentation

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Specifications: >> Year of manufacture: approx. 2000, Machine no. D3F H1 010 >> Centre height: 170 mm >> Swing diameter over bed: 340 mm >> Swing diameter over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirements: approx. length 1.600 x depth 0.9 x height 1.3 meters >> Weight: approx. 730 kg Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, rapid zeroing, count direction switching >> 1 piece 3-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: Offered is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in excellent condition. The machine is naturally fully functional. The bedways are in very good condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Lhsdpfx Aswvuf Tsh Den

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 350 mm, izvrtina vretena: 43 mm, premer struženja: 350 mm, premer struženja nad ležiščem sani: 195 mm, višina središča: 175 mm, stružna dolžina: 800 mm, poteza s peresom: 110 mm, premer trikrake glave: 160 mm, L- and drawbar lathe GDW CE, guides and mechanical components in very good condition With chuck guard interlock and motor brake Weight 850 kg Coolant system Ledpfxov Syxxe Ah Dshn Drill chuck, revolving centres, Multifix toolholder size B with 3 inserts Chuck guard interlock Motor brake

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 720 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D4D194801, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 50 mm, premer struženja nad ležiščem sani: 340 mm, višina središča: 170 mm, največja hitrost vretena: 3.000 obr/min, Machine was used for training purposes and has only approx. 720 spindle hours TECHNICAL DETAILS Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal travel of carriage: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool shank cross-section: 20 x 20 mm Main drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. face plate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Lodpfsv Iqm Sox Ah Dohn Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MK 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centres: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height over floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable spindle speed control - Röhm ZS Ø200 3-jaw chuck - 5 x quick-change tool holders B25/120 - Tool set - Fixed centre MK 5 - Turning tool set with parting tool (3 x standard, 1 x parting-off)

Stanje: dober (rabljeno), Lead and feed screw lathe Weiler Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Spindle speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MT 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: Lsdeu E H Iwspfx Ah Dehn 3-jaw chuck Quick-change toolpost system Multifix size A incl. 1 toolholder Electrically interlocked chuck guard Retrofitted brake motor Bed stop Emergency stop button Coolant system Machine lamp Chip guard at rear ELESTA 3-axis digital readout Rotating centre The machine has been technically inspected and is in very good condition. Backlash on cross slide: 0.2 mm Backlash on top slide: 0.15 mm Inspection under power possible at any time. Price net, ex-works, loaded from stock

Stanje: novo, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1000 kg Lhodega Ty Ejpfx Ah Den INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post type Multifix TOOE5 with 4 holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work light and coolant system * Fixed and traveling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE

Stanje: novo, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 280 VS-G basicline Condition: New machine with infinitely variable feed control to the highest safety standard Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard features include: GDW operating panel with feed potentiometer - Direction of travel indicator - Spindle speed display - Teach-in function for feed path during threading - Input of feed and thread pitches - Thread pitches in metric, inch, module, DP GDW 3-axis position display - 6" TFT color display - Radius / diameter display - Tool memory for 100 tools - Switchable mm / inch - Axis coupling Z / Zo - Taper calculation - Calculator - Graphical input assistance - USB port - Automatic standby mode Ledpfx Aefbmlish Dohn Also included as standard: - LED machine light, integrated into machine enclosure - Quick-change tool post size A with turning tool holder - Leadscrew interlock with key - Braking device for main drive - Sliding chuck guard with safety interlock - Removable chip guard rear wall - Movable splash guard - Pull-out chip tray - Single longitudinal bed stop (fixed stop) - Central lubrication - Reducing sleeve for main spindle internal taper ME 50/Morse Taper 3 - Protective flange for spindle nose to DIN 55027-5 - 2 solid centre points DIN 806-MT 3 - Set of operating tools with tool bag, set of keys, oil can - 5 replacement shear pins - 2 operating manuals with spare parts lists, electrical documentation

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Lsdpfxsvambco Ah Dohn Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, GDW LZ 350 S Lathe + Accessories Manufacturer: GDW Model: LZ 350 S Condition: Used Year of manufacture: 1999 Centre height: 175 mm Swing diameter over bed: 310 mm Swing diameter over cross slide: 195 mm Distance between centers: 800 mm Spindle nose: DIN 55027 Size 5 Spindle bore: 43 mm Collet passage: 27 mm Internal taper similar to shortened DIN 228 ME 50 Chuck diameter normal/max.: 160/200 mm Face and fixture plate diameter max.: 315 mm Tool slide Cross slide travel: 185 mm Top slide travel: 115 mm Top slide swivel range: 90/-65 degrees Tool system size: B Tailstock with handwheel Quill stroke: 110 mm Quill diameter: 50 mm Taper fitting according to DIN 228: 3 MT 3 Gear stages: 2 Spindle speeds V: 45 70 90 110 140 175 220 350 rpm Spindle speeds W: 250 400 500 630 800 1000 1260 2000 rpm Lhodpfswp Hkhjx Ah Don Dimensions (L x W x H): 1810 x 900 x 1400 mm Weight: 800 kg Scope of delivery: – Original documentation – 3-jaw chuck – Digital readout – Coolant system – Multifix B tool holder – Machine feet

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 470 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D4D210301, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 50 mm, premer struženja nad ležiščem sani: 340 mm, višina središča: 170 mm, največja hitrost vretena: 3.000 obr/min, Machine was used for training purposes and has only approx. 460 spindle hours TECHNICAL DETAILS Centers distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Infinitely variable Speed ranges: 4 Speed settings: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Lhjdpfxsv Iqlzs Ah Den Longitudinal feeds: 0.045 - 0.787 mm/rev Cross feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Permissible Workpiece Weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS Ø200 3-jaw chuck (soft jaws, internal and external jaws stepped) - 5 x quick-change tool holders B25/120 - Tool set - Fixed centre MT 5 - Set of turning tools (3 x standard, 1 x parting tool)

Stanje: dober (rabljeno), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed: 15–3250 rpm 1 x SCHUNK wedge bar power chuck Ø160mm 1 x MULTIFIX toolholder size B with 4 inserts Machine lamp, chuck guard with electrical interlock Machine mounting feet 1 x live centre Lhodpfxouqkf No Ah Djn 1 x live centre with pressure gauge 1 x drill chuck with morse taper The machine is located with us in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine can be arranged by appointment.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, stružna dolžina: 650 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 20 obr/min, skupna masa: 800 kg, nosilec vretena: MK 3, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories available on request... Lodpfx Ahevnrzqo Dehn

Stanje: novo, Lead and feed screw lathe Manufacturer: ROMI Model: T240 x 1000 Condition: New machine Centre height: 220 mm Centre distance: 1,000 mm Lhjdpob Suakefx Ah Den Standard equipment includes: - 3-axis digital readout FAGOR Innova 30i-T - Coolant system - Bed stop for automatic shut-off - Quick-change toolpost base, size B - Operating manual

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 50 mm, višina središča: 170 mm, skupna dolžina: 1.650 mm, skupna širina: 1.060 mm, skupna višina: 1.635 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 755 kg, premer trikrake glave: 200 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Brand new machine immediately available from our Stuttgart stock. (Subject to prior sale) Whether for prototyping, maintenance, or—most importantly—training, EMCO’s conventional and cycle-controlled machines bridge the gap by offering maximum precision in a compact footprint and exceptional flexibility down to the last detail. From optional accessories to organizing installation, we provide comprehensive advisory support. EMCOMAT 17D Highlights: - Main spindle DIN 55029 - Tailstock (offset adjustable) - Single tool holder (clamping claw) - Belt drive for feed gearbox - Chuck guard with electrical limit switch - Optional equipment, such as coolant system, sliding chip guard doors, etc. Working Area: - Travel in X/Y/Z: 220 / - / 710 mm - Distance between centers: 700 mm - Center height: 170 mm Main Spindle: - Max. speed: 3,000 rpm - Spindle mount: Size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Internal taper: MT3 - Quill stroke: 120 mm - Quill internal taper: 50 mm Ledpfx Ajdq Rb Aeh Dohn The machine can be inspected in Stuttgart.

Stanje: dober (rabljeno), Leto izdelave: 2010, Conventional lathe, center height 254 mm, center distance 1000 mm, spindle bore Ø 80 mm, 12 speeds 30 - 2200 rpm, motor 5.5 kW, Camlock 6'', dimensions 230x115x165 cm, weight approx. 1750 kg; Equipment: 2-axis digital readout, coolant system, 3-jaw chuck Ø 250 mm, rotating live center, MULTIFIX C quick-change tool post with various holders, fixed and travelling steady rest, Lhedetv Iy Espfx Ah Den

Stanje: novo, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally deployable for production, training, and further education. This machine stands out with: forward-looking technology maximum precision durability operator-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORK AREA Center height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless Lodshw N Ntepfx Ah Dehn FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and swiveling, 1366 x 768 resolution - Change control screens via swipe gestures - All functions accessible via app manager - Control panels can be configured, placed, and scaled freely - Import drawings / sketches from PDF via USB interface, individually zoomable - Video-assisted machine maintenance - Context help menu (instead of WEILER VC plus display) - Coolant system 18 liters incl. coolant pump The machine is available for immediate delivery and can be inspected in our showroom in 71334 Waiblingen-Beinstein. For details on equipment, please contact us.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Lsdpfx Ahog R S Rcj Dshn Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual -Used, as seen-

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A Ljdpfov D Ip Nsx Ah Dshn - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Lhodpfjhy Tdysx Ah Dsn Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard - Quick-change tool post, size A - Simple bed stop - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Universal lead and feed screw lathe Make: WEILER Model: Commodor Year of manufacture: 1974 – overhauled Newly painted RAL 7035 light grey Machine No.: 0068 Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 56 mm With warranty Geometric acceptance with test protocol Accessories: - New FAGOR Innova 30i-T 3-axis digital readout Lodpfx Asmgaddeh Djhn - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -