Slikarstvo

Pony Luxury Coating M&K Pony 7000

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. Hsdpfx Ajwzmcbof Tsfb • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Leto izdelave: 2016, Stanje: delavnici obnovljeno (rabljeno), v prenovi, dobavni rok konec januarja 2026, garancija 12 mesecev - Najvišja temperatura 200°C; temperatura se lahko na zahtevo poveča na 250°C - Notranje mere Š 1000 x G 1000 x V 1500 mm - Zunanje mere Š 1765 x G 1425 x V 2300 mm - s kontrolerjem Jumo Dicon Touch - Vodila za vhod, za polnjenje peči - Grelna moč 36 kW - Lastna teža: 780 kg - Odvodna odprtina; odvodni ventilator in električna loputa se lahko naknadno vgradita na zahtevo. - Voziček za polnjenje na zahtevo (slika) - Dokumentacija, CE izjavo Hjdovk Navspfx Af Tsfb Namestitev in zagon z veseljem ponudimo tudi mi. Ogled v naši skladiščni hali po dogovoru. Peč, peči, sušilna peč, žgalna peč, toplotna peč, toplotna omara, industrijska peč, žarilna peč, segrevalna peč, temperirna peč, sušilna omara, komorna peč, peč za žganje, obtokovna sušilna omara, obtokovna peč.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Hfodpfxsd Iipxo Af Tjb SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard Hfodpfx Afjvrcqdj Teb >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Spray / Paint Booth !! This is a brand-new machine directly from production, we are the manufacturer. Photos are from previous customer installations !! Hjdpfxeia Taus Af Tefb Professional Spray/Paint Booth Reinox 300×235, ideal for medium-sized parts and serial production. Designed for use in environments with explosion risk (EX certified), it offers high extraction performance, efficient three-stage filtration, and reliable operation in continuous use. Technical specifications: - Extraction area: 3000 × 1900 mm - Overall dimensions: 3100 × 2350 × 1910 mm - Dimensions exclude fan and control panel! - Fan power: 3 kW (ATEX version) - Fan suction capacity: 16,000 m³/h (max. 1,100 Pa) - Lighting: 2 × 36 W, ATEX certified - Power supply: 400 V, 3-phase Frequency Converter: for smooth adjustment of fan performance via potentiometer on the control panel. Filtration: Three-stage system Certification & Documentation: CE, EX / ATEX, complete technical documentation Warranty: standard (12 months) !!! Machines available in various individual configurations and sizes upon request !!! Do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Spray/Painting Booth The professional spray/painting booth Reinox 300×185 is designed for partial painting and spraying in production environments where controlled filtration and safety measures in explosive atmospheres (ATEX) are required. With its high-performance extraction and three-stage filtration, a clean working environment is secured even under intensive operation. !! Always a brand new machine (photos are from customer installations). We are the manufacturer. !! Technical specifications: - Extraction area: 3,000 × 1,400 mm - Overall dimensions (excluding fan and control panel): 3,100 × 1,850 × 810 mm - Fan power: 3 kW (ATEX version) - Suction capacity: 16,000 m³/h (max. 1,100 Pa) - Power supply: 400 V / three-phase Hodpfx Aeia Ta Hof Tefb - Control: frequency inverter – stepless power regulation via potentiometer on control panel. - Filtration: three-stage filter Certification & documentation: CE, ATEX, complete technical documentation Warranty: standard Machines available to order in various custom configurations and sizes! Do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.000 mm, skupna širina: 3.500 mm, skupna višina: 2.950 mm, notranja višina: 2.650 mm, notranja dolžina: 4.900 mm, notranja širina: 3.400 mm, Oprema: kabina, Vehicle Spray Booth The vehicle spray booth is a fundamental piece of equipment for paint repair technology. It allows paintwork to be carried out under safe and comfortable conditions while minimizing negative impacts on both the surrounding area and the environment. Technical specifications: - External dimensions: 5000 (+ air supply unit 1350 × 2900 mm) × 3500 × 2950 mm - Drive-through gate: 3000 × 2600 mm (triple-winged) - Service door: 700 × 2000 mm - Structure: made from steel sheet - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Booth wall structure: - Thickness: 50 mm - Filling: EPS polystyrene - Colour: white Booth floor: - Booth mounted directly on floor / concrete slab Double ceiling: - Outer ceiling panel - Full-length plenum above the ceiling area for supply air Air exchange system: - Supply air system: - Jet turbine 4 kW – 2 units - Air capacity: 26,000 m³/h - Exhaust air system: - Jet turbine 5.5 kW – 1 unit - Air capacity: 18,000 m³/h Lighting: - 8 side lamps - Ceiling lighting: 24 LED fluorescent tubes Air heating system: - Single-stage oil burner Riello model 40 G20 - Burner control: manual Hfsdpfx Aoxnpczsf Tob - Heat-up time: 8–15 minutes Filtration system: - Double-layer filter structure - High-performance air purification system with up to 99% filter efficiency

Stanje: pripravljen za uporabo (rabljen), delovna širina 4 metre dvostopenjska filtracija: kartonski filter + podloga paint stop zgornji filter za kroženje zraka osvetlitev delovnega mesta Hedpfx Afow Rpxce Tsfb moč ventilatorskega motorja 4 kW italijanska proizvodnja Električna plošča v zaščitnem razredu IP55 Stropna osvetlitev v zaščitnem razredu IP65 Nujni gumb (STOP) Izpustni lijak Nova

Stanje: dober (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.620 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A20221005, We are selling a complete paint line from Venjakob, which we used for the application of clear coat on sheet metal panels. Hodpfjw E E Ausx Af Tjfb The sheets had dimensions of 1,500 mm in width and were 6,000 mm long. The individual sheet weight was up to 300 kg. The system is equipped with six independently programmable spray guns. A drying tunnel is connected to the line. The conveyor belt inside the booth has an integrated cleaning unit.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.600 mm, skupna dolžina: 11.200 mm, skupna širina: 5.100 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, notranja višina: 4.970 mm, notranja dolžina: 11.000 mm, temperatura: 80 °C, notranja širina: 5.000 mm, potreba po zraku: 52.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), moč: 45 kW (61,18 KM), gorivo: utekočinjeni naftni plin (LPG), vhodna frekvenca: 50 Hz, poraba energije: 45 kWh, debelina izolacije: 50 mm, nazivna moč: 250 kW (339,91 KM), najv. debelina jeklene pločevine: 2 mm, Oprema: osvetlitev, * Air Treatment Unit: The air treatment unit is a circulation system that supplies the cabin with filtered fresh air and extracts used air during the painting process. It heats the air to 60°C, mixes the exhausted air with 10% fresh air via an automatic multi-damper system, and reheats the air before recirculating it into the cabin. The air is heated by a burner and a heat exchanger, both made of high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air is filtered twice (by pre-filters and ceiling filters) before entering the cabin. The polluted air is also filtered twice (inlet and exhaust filters) before leaving the exhaust unit. Air treatment units are insulated like the sidewalls to minimize heat loss and are protected against possible vibration and noise by rubber seals on the covers. The exhaust air is regulated by a damper in the exhaust duct, contributing to the control of the cabin’s internal pressure. *OPERATING PRINCIPLES OF THE CABIN:* The processes in the cabin are controlled via a control panel, which manages the following steps: *PAINTING PROCESS:* During painting, 100% fresh air is drawn in from outside and passed through the front filters before reaching the plenum at ambient temperature. The air is then discharged via the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before being released. Hedpfx Aewzl Hxef Tjfb *FLASH-OFF PROCESS:* After painting, the cabin runs for another 15 minutes to expel residual solvents and thinners. Fresh air from outside circulates in the cabin during this phase. *DRYING PROCESS* In this phase, 80% of the air flowing through the cabin is heated to 60°C and delivered into the cabin via a plenum. Since 20% of the solvent is released during drying, the solvent is expelled with this air. Industrial paints are typically dried at 60°C; however, the cabin temperature can be adjusted via the control panel as needed. *COOLING PROCESS:* After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates into the cabin, and afterwards, the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of the machines and devices integrated into the cabin. The control panel is made of durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Switch Panels: • The control panel contains essential components such as contact breakers, fuses, indicator lights, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • The electrical wiring is designed to allow cabin relocation, if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.