Zrak Kladivo nakup rabljenega (1.136)

Stanje: novo, Excavator class: 14.0 - 20.0 tons Weight: 1,357 kg Blow rate: 350 - 650 bpm Operating pressure: 150 - 170 kg/cm² Oil flow rate: 90 - 120 l/min Chisel diameter: 125 mm All models are supplied with chisel, hose kit, and toolbox. Dedpfx Agjlqakro Hjki

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, General Information Intended use: Construction Reference number: 2 Weights Empty weight: 750 kg Functional CE marking: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Optical condition: very good Dkedowurv Topfx Ag Hsi Further information Suitable for the following machines: 10 t - 17 t Delivery terms: EXW Transport dimensions (L x W x H): 1.2x0.8x0.6 m Operating pressure: 140-170 bar Required hydraulic flow: 120 l/min Impact frequency: 370-840 Last inspection: 2025-05-05 Country of manufacture: DE Additional information Please contact Mr. Ö. Inalkac for further details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Splošne informacije Namen uporabe: gradbeništvo Referenčna številka: 6 Dksdpfx Agjx Ezl Ss Hei Teža Lastna teža: 300 kg Funkcionalnost CE označba: da Vzdrževanje, zgodovina in stanje Število lastnikov: 1 Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Primerno za naslednje stroje: 4,5 t - 9 t Dobavni pogoji: EXW Transportne dimenzije (D x Š x V): 1,2x0,8x0,6 Delovni tlak: 100-150 bar Potreben hidravlični pretok: 80 l/min Frekvenca udarcev: 600-1400 Zadnji pregled: 2025-05-05 Država izdelave: DE Dodatne informacije Za več informacij se obrnite na Ö. Inalkac.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Splošne informacije Namen uporabe: Gradbeništvo Referenčna številka: 2 Teža Lastna teža: 450 kg Funkcionalnost CE oznaka: da Dksdpjrr Tg Nofx Ag Hji Vzdrževanje, zgodovina in stanje Število lastnikov: 1 Tehnično stanje: zelo dobro Videz: zelo dobro Dodatne informacije Primerno za naslednje stroje: 6,5 t - 13 t Dobavni pogoji: EXW Delovni tlak: 100-150 bar Zahtevan hidravlični pretok: 100 l/min Frekvenca udarcev: 550-1250 Zadnji pregled: 2024-03-01 Država izdelave: DE Dodatne informacije Za več informacij se obrnite na Ö. Inalkac.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, IE3 motor as standard Maximum air volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter surface Pre-separator as standard 71 dB(A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0.1 mg/m³ reliably maintained (wood dust) Models with pattern-tested rotary valve (FSA) Tested backdraft damper Integrated automatic extinguishing system 350+ P Djdpfjdqzhhox Ag Hski Suction nozzle: 355 mm Rated motor power: 15.0 kW / 3Ph Voltage: 400 V / 50Hz Max. air volume flow: 10,000 m³/h Rated air volume flow*: 7,127 m³/h Negative pressure at Vnenn.: 3,347 Pa Filter surface: 73 m² Chip collection volume (net / gross): 3 x 165 L / 3 x 241 L Sound pressure level: 72 dB(A) Dimensions (L/W/H) in mm: 3,112 x 1,058 x 2,361 Weight: 1,074 kg

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Dkjdshk S Sdepfx Ag Hsi Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing and saw chips (not suitable for dust) 180° rotatable extraction unit allows for suction from below or above Robust fan impeller made of metal Supplied with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 110 l Outer diameter extraction nozzle inlet: 203 mm Outer diameter extraction nozzle outlet: 1 x 100, 1 x 120 mm Dksdpfx Agohk S Shj Hji Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min¯¹ Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Airflow Nominal airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Dkodpfxjhk S Slo Ag Hoi Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Max. sound pressure level: 84 dB(A) Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Scope of delivery: Dkodpshk S Szsfx Ag Hei System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dkedpfjhk S Stjx Ag Hsi Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2025, AL-KO Clean Air Dust Extractor Demonstration unit (no operating hours - as new) Technical Data Power Unit 250 P: Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2,305 x 994 x 2,351 Dksdpfx Ajbuvbreg Hoi Weight: 758 kg Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Description: IE3 motor as standard Maximum airflow up to 8,500 m³/h at the fan Approx. 73 m² filter surface, residual dust content according to H3 Pre-separator as standard 71 dB(A) under full load (according to DIN EN ISO 11201) Already compliant with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested backdraft damper Integrated automatic extinguishing system Inlet diameter: 350 mm Rated motor power: 11 kW Voltage: 400 V / 50 Hz Maximum airflow: 8,500 m³/h Rated airflow: 6,927 m³/h Negative pressure at rated airflow: 2,765 Pa Filter surface area: 73 m² Chip collection volume (net/gross): 3 x 165 l / 3 x 241 l Sound pressure level: 71 dB(A) Dimensions (L x W x H): 3,112 x 1,058 x 2,351 mm Weight: 1,074 kg Djdpfocqy I Sjx Ag Heki Location: In stock at 54634 Bitburg

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, volumenski pretok: 486 m³/h, skupna širina: 610 mm, skupna dolžina: 625 mm, skupna višina: 1.030 mm, skupna masa: 92 kg, vhodna napetost: 230 V, okoljska temperatura (maks.): 50 °C, temperatura okolja (min.): 1 °C, vrsta hlajenja: zrak, tlak (maks.): 14 letvica, moč: 0,98 kW (1,33 KM), vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Ponujamo nov hladilni sušilnik stisnjenega zraka Friulair ACT 80, letnik 2022. Napetost: 230 V Frekvenca: 50 Hz Djdpjyf Earofx Ag Hoki Poraba moči: 0,98 kW Tok: 4,6 A Najv. delovni tlak: 14 bar Pretok zraka: 8.100 l/min / 486 m3/h Hladilno sredstvo: R407C Teža: 105 kg (bruto) Odvajalnik kondenzata: Bekomat Za dodatne informacije ali vprašanja nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 13 letvica, vrsta vhodnega toka: Klimatska naprava, volumenski pretok: 390 m³/h, skupna širina: 580 mm, skupna dolžina: 588 mm, skupna višina: 899 mm, pritisk: 13 letvica, skupna masa: 80 kg, rosišče pod tlakom: 3 °C, vhodna napetost: 230 V, okoljska temperatura (maks.): 45 °C, temperatura okolja (min.): 1 °C, tlak (maks.): 14 letvica, moč: 0,71 kW (0,97 KM), lastna masa: 80 kg, vhodna frekvenca: 50 Hz, nazivna moč: 0,71 kW (0,97 KM), vhodni tok: 3 A, zračni tlak: 13 letvica, For sale: 2 industrial refrigerated air dryers – available together or separately We are offering two used industrial refrigerated air dryers for compressed air applications. The machines can be purchased either as a set or individually. They are ideal for use in compressed air systems where reliable drying and condensate removal are required. 1. Airgroup AGD 450 – refrigerated air dryer (2021) General information Brand / model: Airgroup AGD 450 Year of manufacture: 2021 Serial number: 210008384 Code: AGD450AC9A085 Technical specifications Nominal flow rate: 450 m³/h Max. operating pressure (compressed air circuit): 14 bar Compressed air circuit capacity: 5.9 liters Air temperature range: 2 … 55 °C Cooling system Refrigerant: R407C Refrigerant quantity: 0.65 kg CO₂ equivalent: 1.15 t Refrigerant circuit volume: 0.6 liters PS HP / LP: 39.2 / 20.9 bar Refrigerant temperature range: −10 … 120 °C Electrical Connection: 1/230 V ±10% / 50 Hz Power: 0.71 kW Nominal current: 3.4 A Max. current (FLA): 8.9 A Fuse: 10 A Protection class: IP40 Other PED Directive: 2014/68/EU – Cat. I Fluid group: 2 Ambient temperature: 1 … 45 °C Diagram: WD003 V00 R00 2. ALUP ADQ 390 – refrigerated air dryer (2014) General information Brand / model: ALUP ADQ 390 Year of manufacture: 2014 Product number: 4102000802 Serial number: CAI692332 Technical specifications Nominal flow rate: approx. 390 m³/h Working pressure: 13 bar Max. pressure: 13 bar Temperatures Max. air inlet temperature: 55 °C Max. ambient temperature: 43 °C Electrical Connection: 230 V / 50 Hz Dkedjyhdhmepfx Ag Hsi Power: 1.64 kW Phase: single-phase Refrigerant Type: R404A Quantity: 1.35 kg Weight Total weight: approx. 80 kg Sales information Available as a set or individually Suitable for industrial compressed air installations Ideal for removing moisture and condensate from compressed air Interested or have questions? Please feel free to contact us for more information, a quotation, or to arrange a viewing.

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), MŁOT KUŹNICZY HUTA ZYGMUNT MPM 6300B Dkodpfx Ajivqanog Hoi

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C Dkodpfx Asvz Hq Tjg Hsi - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 Dedpfx Ajvz Hq Hjg Hski The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar Dsdpfxovz Hqys Ag Heki - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. Dksdpfx Agevz Hqtj Hsi These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg Djdpfx Agevz Hqmo Hoki - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ Dedpfx Agsvz Hqgs Hski - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm Dkedsvz Hhxjpfx Ag Hji - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Leto izdelave: 2025, stanje: novo, The hammer mill HM 300 is ideally suited for crushing soft, medium-hard, and brittle materials such as catalysts, electronic scrap, gypsum, epoxy resin, and many more. Max. feed size Dkjdpef Ulynefx Ag Hji

Leto izdelave: 2025, stanje: novo, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Djdog Ay Dhepfx Ag Hoki

Stanje: rabljeno, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank - Capacity: 11.5 ltr - Permissible operating overpressure: 17 bar - Dimensions: 270/250/H480 mm - Weight: 8 kg Dkedpfxod Atx Es Ag Hoi