Takoj je na voljo enota za čiščenje zraka/odpraševalnik prahu.

AL-KO Power Unit 120 M

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Ffsdpfx Ascnw U Doflst Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: dober (rabljeno), Leto izdelave: 2019, Weinig Conturex Greenline Plus CNC Fensterfertigungsmaschine Beschreibung: Baujahr: 2019 Bearbeitungslänge des Werkstücks: 4500 mm Automatische Teilekontrolle am Einlauf Spannbackenverstellung in Verbindung mit Falzspannern Hauptmotor 30 kW indirekt angetrieben Unispindel für Schlitz-, Bohr- und Sonderbearbeitung Werkzeugwechsler mit 35 und 17 Positionen HSK 63F Werkzeugaufnahme Spezialsoftware zur Maschinen- und Betriebsdatenerfassung Ein-/Auslaufpufferlänge: 2000 / 2500 mm Optionales Werkzeugsatz/Plan verfügbar Fsdpfxsw N Nixo Aflsft Vollständige Beschreibung auf Anfrage (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer bei technischen Daten, Preisen und Informationen vorbehalten. Keine Garantie auf gedruckte Angaben! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise zzgl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 1997, Connected load: 380V, 5.2A, 2.0kW, saw blade diameter: 350 mm, tiltable to both sides 45°, height adjustment via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, roller conveyor on the right with stop, cutting length: 3,200 mm, roller conveyor on the left with stop, cutting length: 2,200 mm. Fedpfx Afewhn T Uslsft

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Fjdpfx Aenl Nqqefljft Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Extruder Alphatec Type AE-S 75.28 Screw diameter: 75 mm – 28 L/D Drive: 75 kW, AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW Fsdpfjiyya Ajx Afljft 3x temperature control zones for downstream equipment Control cabinet – new control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Large semi-automated Polar 137 XT-Autotrim Pace Cutting System with stack lift, jogger with counting scale, gripper transport system, turn gripper, and unloader, year 2010, approx. 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height with a loading lift, placed in the jogger by the operator, jogged, and then automatically transported by the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter, where it is rotated. After cutting, the Transomat automatically deposits the stacks onto a pallet, allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting or lowering. Jogger RAH-4 with air removal roller and discharge for rear-table feed Usable format up to 75 x 105 cm Discharge of jogged cutting stock is automatic to the rear into the STR stacking rack. The Autotrans gripper transport system then transfers the stacks to the rear table of the high-speed cutter. Ffodpsxd U Sasfx Aflet Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting layers. Gripper transport system POLAR Autoturn – gripper transport for rear-table loading and turn gripper Accepts the prepared cutting stack from the stacking rack or buffer table. Via air tables, which optimize the handling process with an air cushion, the cutting material is transported directly to the rear table of the cutter and positioned precisely there. During transport, the grippers hold the cutting stack securely in place, ensuring that even aligned stacks remain exactly squared. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function, i.e., automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear-table loading), also allowing formats with a diagonal of ...

Stanje: rabljeno, No. 04480 Graule ZS 135 N Crosscut and Mitre Circular Saw Used This machine type is designed for crosscutting as well as for horizontal and vertical mitre cuts; dual mitre cuts are also possible. - Precision ball-bushing guide of the tool carriage on hardened and ground steel shafts - Quick mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable fixed stops at 90° and 45° - Machine is adjustable for mitre cutting on two axes - Adjustable aluminium fence plates - Robust cast iron construction - Lower saw blade guard can be connected to an extraction system - 3 kW 400 V three-phase brake motor (special equipment) - Saw blade diameter: 350 mm, blade bore: 30/40 mm, max. cutting height: 135 mm, max. cutting length: 430 mm, blade tilted at 45°: cutting height 92 mm Includes: Ffsdew Htm Repfx Aflet - 350 mm diameter saw blade for aluminium - Machine stand suitable for ZS 135 N - Roller conveyor RLK 3000 x 350 mm, with length stop, scale, and fold-away material stop, roller diameter approx. 40 mm Transport dimensions of the machine approx.: 1300 x 700 x 1700 mm (LxWxH), roller conveyor approx. 3000 x 500 x 800 mm (LxWxH) Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sold as is Technical data, condition report, year of manufacture and scope of supply according to manufacturer’s brochure or previous owner, no guarantee. Subject to prior sale. For used machines, all warranties are excluded; the following applies: “purchased as seen.” Terms of payment: Prices plus legal VAT, payment prior to collection or shipping Delivery terms: ex stock

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Ffjdpfx Afowcyd Isljt Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Stanje: novo, Glazing Bead Nailing Machine "2 P Jumbo automatic E.C." - new - Your advantages: - Corner joints are completely closed - No open glazing bead joints Fsdpfxsvnh T Nj Afljft - No colour discrepancies when painting - Glazing bead frames are easily identifiable Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, top and front clamping unit Pressure adjustable separately. Insertion of parallel and stacked staples possible via electronic program control. Stapling device can be mounted on a suitable workbench, Operated via foot pedal. ----- Price for this configuration upon request! Plus statutory VAT and packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the option of a mobile workbench (see details under extra charges) Extra charges: ----- Mobile workbench height adjustable from 700 – 1000 mm, 2 removable support bars, each 1000 mm long, 2 swivelling and sliding support bars, each 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which with locking device. ----- Extra charge: €992.00 net Staples: Packages 15 mm staples (pack of 2,000): Price €21.00 12 mm staples (pack of 3,000): Price €31.00 10 mm staples (pack of 3,000): Price €31.00 Dimensions and weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Workbench 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no liability!)

Stanje: dober (rabljeno), OFFER 70105 Technical Specifications: - Hole diameters approx.: 44, 45, 48, 52, 2 x 55, 2 x 58, 61, 66 mm - 2 x 68, 2 x 80, 81, 85 mm - Oblong hole dimensions approx.: 12 x 42, 12 x 50, 18 x 55 mm - Punch holder: 58 mm - Punch height: 54 + 58 mm - Adapter ring for punch - Die height: 30 + 40 mm - Die outer diameter: 90 + 140 mm - Adapter ring for dies: 90 - 140 mm Fedpfxjg T S Axs Afljft - Weight approx.: 90 kg