Sušilnik stisnjenega zraka 6000 l/min

ALMIG ALM 400

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: TR0054_ALMRD400, New ALMIG ALM-RD400 REFRIGERATION AIR DRYER (available immediately!) Including pre- and after-filters Model: ALM-RD 400 Delivery rate: 6.25 m³/min* Reliable and energy-efficient air-cooled refrigeration dryer ALM-RD 400 Compact footprint Low operating costs Two integrated filters (pre-filter and micro filter) Energy-efficient refrigerant R134a State-of-the-art heat exchanger for maximum energy savings Max. working pressure: 16 bar Max. inlet temperature: 60°C Min./max. ambient temperature: 5/50°C Voltage/Frequency: 230V/50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 555 x 505 x 874 mm Weight: 86 kg * Maximum compressed air flow, 35°C inlet temperature, 7 bar, 25°C ambient temperature, pressure dew point 3°C Water in compressed air can cause severe damage to air tools, expensive machinery (such as CNC machines), or similar applications. Therefore, we recommend one of our affordable ALM-RD series compressed air dryers. Bwsdog Tvngepfx Afnoi Attractive leasing options for new machines available through our partner bank. Visit our retail store. We always have a large selection of new and used compressors in stock!

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: Bwodpfx Ashigmbjfnsi High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This degreasing system operates under vacuum (pressure swing process) using modified alcohol or hydrocarbon. (New system) 12 months warranty Immediately available from St. Gallen Bwedpfx Afeqy H H Denji Featuring vacuum pressure swing process Plant process: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Technical Data: - Ultrasonic: 2 × 1000 W – 25 kHz - Double fine filter - Chamber door made of armored glass - 2-tank system, filling volume 400L - Dual distillation, residual distillation - Automatic oil discharge - 3-stage water separation - Electropolished chamber for fine cleaning - Screw vacuum pump (latest generation) - Loading trolley - 2 washing baskets, mesh width 7mm and 12mm - 12" touch panel - Prepared for automatic loading Maximum basket size (480 x 320 x 200 h mm) Maximum loading weight 100 kg Plant dimensions 2400 x 2400 x 3300 h mm Plant weight (basic configuration) 2500 kg Color scheme RAL 9003 (white) RAL 7021 (black)

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. Bwedpfjiiv Ikjx Afnoi • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Bedsuthz Tspfx Afnjwi Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Max. sheet thickness, aluminium: 10 mm Operating hours: NC The machine has been regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure regulation - APC capacitive height control and process regulation - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensor technology - Automatic outer sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT colour screen - Electrical equipment: voltage 400 V / 50 Hz - Paint finish: standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000, including lens monitoring sensor technology - PCS Process Control System

Stanje: novo, Table length: 1200 mm Bedpjpk Iv Uefx Afnewi Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 to 890 mm Underside reinforced with ribbing. Including floor bearing Optional accessories available! Surface flatness: 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 7.900 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, proizvajalec krmilnikov: Siemens, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Trumpf, laserske ure: 7.850 h, laserska moč: 3.200 W, prebojni premer: 76 mm, Oprema: centralizirani mazalni sistem, hitroizmenjevalna naprava, hladilna enota, menjalnik šob, nožno daljinsko upravljanje, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, TruFlow 3200 Laser, including LensLine with optimized standby Nozzle change device Multitool drive "Multishear" function "Multibend" function "Tapping" function Bedjx N Hyvspfx Afnswi Fast "Marking" / "Ribbing" function "Engraving" function "Rolling" and "Deburring" function "Softpunch" function Active Die Stripline Repositioning with pneumatic cylinders Damped installation Chip conveyor with container Ball worktable with brush inserts Blow-off device Sheetmaster (3000 x 1500) Automatic sheet separation system with lateral air blow Additional positioning guides for format (2500 x 1250) Additional positioning guides for format (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double carriages with toothed belt drive (3000 x 1500) Loading and unloading unit Good parts conveyor on punching side Good parts conveyor on laser side Storage interface No. 21 RTC tool cassettes incl. die holder plate

Stanje: novo, Leto izdelave: 2026, The skyCUBE M / P / SL laser processing center – the new benchmark in laser material processing! (* Prices depending on configuration; this is a brand-new laser machine manufactured by us) Laser options tailored to your requirements: CO2 laser 150W / 250W / 400W or fiber laser 1500 – 6000W Bwsdpfxjbnphve Afnoi PFEIFER laser processing center skyCUBE Working areas: Mclass = X 1250 x Y 650 x Z 100 mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm skyCUBE laser processing center – the new multifunctional laser engraving and cutting machine – laser processing made easy, high-precision, with fast and high-quality laser engraving and cutting. Our latest and best all-rounder impresses even the most experienced operator with its innovative design. This CO2 laser / fiber laser demonstrates outstanding performance in all industrial applications, serving as both a CO2 or fiber laser engraver and as a CO2 or fiber laser cutter. With an optional laser power of up to 1500W (1.5kW), the CO2 laser device / fiber laser system is extremely flexible for deployment in your production processes. skyCUBE laser systems comply fully with class 1 requirements according to DIN EN 60825-1, ensuring the highest safety standards. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving a wide range of materials, such as various metals, acrylic glass, solid wood and wood-based materials, composite woods, paper, cardboard, various plastics and foams, textiles, and much more. The outstanding build quality of the laser machine, 100% manufactured in Plauen, Germany, ensures laser users – from metalworking to laser source – high working precision with consistently high quality. Cutting speeds of up to 8000 mm/s and engraving speeds of up to 4000 mm/s produce clean, sharp cut edges and precise laser engravings thanks to superior laser technology. The ergonomic design with an extendable work table facilitates easy loading of the system. A drawer at the bottom of the machine is provided for collecting cut materials. User-friendly and intuitive – the supplied skyCUBE PC software (ready for Windows®). A simple, practical interface, adapted to Windows standards, enables efficient operation. High system stability, professional machine monitoring and control, and compatibility with common file formats characterize the software. Data output occurs via layers – individually for each layer, including the definition of sequences and processing types. Parameters such as laser power and processing speed are saved automatically for each layer and can be accessed and reproduced at any time via a material database. With a computer connected via LAN / USB interface, laser projects are transferred to the skyCUBE M laser processing center, where they can be executed repeatedly without the need to keep the PC powered on. A modern touch control panel provides access to all system information and functions.

Stanje: novo, Table length 1590 mm Table width 1490 mm Table height 840 - 890 mm Machine weight approx. 0.4 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15. Surface is untreated. Side walls 165 mm Height adjustable from approx. 880 - 980 mm Bottom side ribbed for reinforcement. Including floor bearings Accessories optional!! Bwedpfjh Dqb Djx Afnoi Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Spray Cleaning System Type SM11 Heavy-duty two-tank parts cleaning unit (washing + rinsing) with basket drive via gear motor, constructed from stainless steel 1.4301. - Three-sided stainless steel nozzle systems including flat and spot-nozzles made of stainless steel - Full system insulation - Automatic steam extraction fan - Side channel blower with air knife for parts drying - Oil skimmer for bath maintenance in the washing tank - Automatic fresh water refill for both tanks - Timer for washing cycle setting Bwsdpjq T H Sijfx Afnji - Electronic lid monitoring - Coarse filter (removable basket) per tank on the return line - Washing pumps made of stainless steel (Manufacturer: Ebara) - Level sensors / dry run protection - Drain connection with ball valve Control system: Siemens Logo - Basket diameter: 1,100 mm - Usable height: 700 mm - Max. load weight: 250 kg - Spray pressure: 3 bar - Tank volume tank 1: 260 liters, tank 2: 140 liters - Heating: electronically adjustable (room temp. – 75°C) - Connected load (electrical): approx. 20 kW - System dimensions (WxDxH): 1,800 x 2,000 x 2,350(h) mm (with lid open)