Odstranjevalec čistega zraka (odsesovalni sistem)

AL-KO POWER UNIT 300 P - sofort verfügbar -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Ex-demonstration unit – as new Available at a special price Technical data 300-P: Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. air flow rate: 6,000 m³/h Rated air flow rate: 5,089 m³/h Vacuum: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Subject to prior sale. Nwedpfecdrzdox Ag Tec

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Nsdpfelc Dwnox Ag Tjwc Control cabinet: 950 x 700 x 1,300 mm Ex site

Stanje: novo, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Nwsdpfed Hmnfjx Ag Tjc Round tubes, square tubes, rectangular tubes, solid materials, profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Working process: Once the workpiece support and side stops are set, the burr-laden workpiece is lightly pressed against the brush, which rotates on its own axis. The workpiece itself does not need to be rotated, as this motion is performed by the brush. The type of workpiece material, burr thickness, as well as the desired edge rounding determine the contact pressure and duration, typically around 1–5 seconds. Technical Data: Material: Steel, stainless steel and non-ferrous metals (motor speeds 700–1,900 rpm, stepless) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 or 3 pieces Ø 300 (250) x 35 Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max. speed 82 dB(A) Scope of delivery: GRATMAXX rotary head deburring brush machine with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement Brushes not included in delivery! Accessories: F50201 Circular brush braided wire 0.38 mm F50202 Circular brush steel wire 0.2 mm F50203 Circular brush steel wire 0.38 mm F50204 Circular brush stainless braided wire 0.38 mm F50205 Circular brush abrasive nylon U180 F50206 Circular brush abrasive nylon U120 F50207 Circular brush stainless steel wire 0.20 mm Further technical details can be found in the attached PDF document.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Elektrostatični zračni filter Indusa elstar EL4001 NVAS R/O Na voljo so še 3 kosi. Sesalni priklop je spodaj desno, izpust zraka zgoraj levo. Nwjdpfofyiqbjx Ag Tec Zračni filtri so iz let 2010–2013 in so bili zelo malo uporabljeni, saj je podjetje leta 2014 prešlo na centralni odsesovalni sistem. Vsi filtri so generalno obnovljeni, očiščeni in dezinficirani, z novim notranjim delom. Naprave so vizualno in tehnično v zelo dobrem stanju. Pred dobavo vse naprave 24 ur delujejo na testnem mestu. Premišljena konstrukcija, visoka kakovost izdelave in prilagodljiva serija so razlog za uspeh elektrostatične serije filtrov elstar. Elektrostatični zračni filter očisti izpušni zrak strojev tam, kjer nastaja – izpušni zrak postane ponovno primeren za dihanje! Elstar elektrofilter je namenjen ločevanju oljne megle, emulzijske megle, oljnega dima, varilskega dima, hlapov, lebdečih delcev, dima z oksidi in aerosolov. Tako je primeren za skoraj vsako industrijsko področje uporabe.

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Nedpfx Aov Uq Tlsg Tswc Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Other options such as extended infeed/outfeed tables or stop systems available on request! (Technical data as per manufacturer, subject to change without notice!)

Stanje: dober (rabljeno), Leto izdelave: 1984, Special offer!!! Wood-fired boiler from Mawera, model FU300 R with 350 kW output. Combustion chamber, heat exchanger, pipework, boiler with auger feeder, rotary valve, ash removal with filter, fan, control system, complete documentation, etc. Nwedpfx Agsd Da Nno Toc Inspection possible at any time in Hungary. Already dismantled!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Nwedsdqzcxopfx Ag Tec Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: dober (rabljeno), Leto izdelave: 2011, Panelna žaga HOLZ-HER Tip: 1255 Stanje: rabljeno Leto izdelave: 2011 Nodpfx Ajx Hyr Hsg Tswc Dolžina reza: 6300 mm (maks.) Navpična višina reza: 2200 mm (maks.) Vodoravna višina reza: 2200 mm (maks.) Debelina obdelovanca: 60 mm (maks.) Višina predreza vodoravno: višina reza Višina predreza vodoravno: 2040 mm (maks.) Napetost: 400V 50 Hz Teža: 920 kg Oprema: - Navodila za uporabo - Naslednji UVV pregled: 05/2026

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. Nedpfxsw I Uxcs Ag Tjwc On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: rabljeno, Leto izdelave: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Grinding unit swivels via hand crank - The machine base, made of welded steel, guarantees high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation can be switched on or off as required - Sanding shoe with graphite coating for increased sanding belt service life - Height-adjustable sanding table to utilize the full width of the sanding belt - Auxiliary table for sanding radii, with integrated extraction openings - Spring-loaded belt tension automatically compensates for differences in belt length - Equipped with adjustable stops – ideally suited for veneer sanding - Veneer overhang can be easily sanded down - With chassis for mobility - Oscillation motor power: 0.11 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Nwedpfxjwkbcbo Ag Tec - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding area length: 800 mm - Sanding area width: 150 mm - Swiveling range of grinding unit: 0–45° - Working table length: 950 mm - Working table width: 450 mm - Working table height adjustment: 110 mm - Dimensions (L×W×H): 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim