Sistem za ekstrakcijo

Höcker Polytechnik Vacumobil VT 200-L

Leto izdelave: 2013, stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg. Tedpfx Anexw N Uvoped

Stanje: novo, Leto izdelave: 2023, Spoštovani stranke! Za hitro in zanesljivo obravnavo vaše zahteve vas prosimo, da nas kontaktirate predvsem po e-pošti. Na ta način lahko vaše vprašanje takoj usmerimo k ustrezni kontaktni osebi, zberemo vse informacije in dokumente ter obdelamo vašo zahtevo čim prej. Veselimo se vaše obvestila in vam z veseljem pomagamo! Vedno na zalogi, na voljo v levi in desni izvedbi z motorično napravo za čiščenje. Riedex DM-200 Moč motorja: 4,0 kW Tjdpsku Aibjfx Anpod Pripravljeno za priključitev. Pakirano na paleti! Pripravljeno za pošiljanje. Na voljo tudi z JET-napravo za čiščenje. Možnih je več različnih izvedb ..... - z rotacijsko pregrado (po želji s podvozjem) - z briketirno stiskalnico itd.

Stanje: rabljeno, Leto izdelave: 2003, Površina filtra: 50 m² Priključek za odsesavanje: 300 mm Dimenzije: 1650 x 1580 x 3550 mm Teža: približno 500 kg Podkonstrukcija z izpustnim vijakom: Motor: 1,5 kW Briquetirna stiskalnica Schuko C 800 - 2 Priključna moč: 3 kW Pretok: približno 35–55 kg/h, odvisno od materiala, z napravo za gašenje Teža: približno 1200 kg. Todpfx Aozb N T Usnpjd Lokacija skladišča: Nattheim.

Leto izdelave: 2025, stanje: novo, Description: - Screening deck system consisting of 1 deck for screening waste wood or wood chips - Input material: 0–200 mm - Throughput: approx. 80 m³/h (depending on material) Tsdpfxeg I Uqfs Anpjd - Material separation into 2 fractions: 0–25 mm and oversize - To be mounted on customer’s own impact walls or substructure Technical Data: - Screening deck 1: Length = 5,200 mm; Width = 1,215 mm - External dimensions: Length = 5,500 mm; Width = 1,850 mm - Screening area: 6.3 m²; Number of shafts: 40 - Drive: 2 x 7.5 kW gear motors - Screen body: Polyurethane (star screen) D 166 / 12 fingers - Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) - Bearing lubrication routed externally, optional central lubrication available at extra cost

Stanje: novo, Typ V-380 Anzahl der Räder (Stk.): 3 Raddurchmesser: 120 mm Radbreite: 60 mm Vorschubgeschwindigkeit: 3,5 / 5 / 7 / 10 / 12,5 / 16 / 25 / 32 m/min Motorleistung: 750 W / 550 W Maschinenrahmen: Aluminiumguss Vorschubrichtung: Vorwärts / Rückwärts Tedpfx Ajdg Ucujnpjd

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. Tedpfx Anjl Rix Eepsd • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Todpfx Asr Iyvbonped Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: - single brick, offset 50% - double brick, offset 50% - triple brick, offset 50% - single brick, offset 25% - double brick, offset 25% - triple brick, offset 25%

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The ASCO® SD COMPACT trommel screen features a rugged, foldable design and is configured as a semi-mobile plant. This trommel screen is used for screening coarse materials such as soil, gravel, wood chips, various waste materials, and bundles of shavings, making it ideal for the recycling industry. The trommel screen can be upgraded with a feed hopper and extension. This results in a system with a hopper conveyor belt that allows operation in both directions, is quickly interchangeable, and has a fully electric control system. In conjunction with the extension, additional screening area is provided as well as the option for a third fraction. It is also worth noting the ability to change drums, both on the main trommel and the extension. There are 7 different drum types available for the main trommel and 4 different drum types for the extension. Technical Specifications: - Drum length: 2.1 m - Usable drum length: 1.7 m - Outer drum diameter: 1.3 m - Usable screening area: 7 m² - Bucket width: 2.3 m - System throughput: 20 - 50 t/h - Mesh size: Ø6 - Ø100 mm - Hopper opening: 2.24 x 0.85 m - Speed (adjustable): 5 - 20 rpm - Drive power: 400V / 5.5 kW (optional 7.5 kW) - Feed height: 2.55 m - Weight: 1500 kg Tsdpfor Akndsx Anpsd - Length: 3.34 m - Width: 2.36 m - Height: 1.95 or 2.92 m (with support) Options: - Vibratory motors for hopper emptying - Drum rotation in both directions - Six different drum variants - Cleaning brush - Quick-change drum system - Two-wheel drive - Operating hours counter

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 57.202 h, proizvajalec krmilnikov: TRUMPF, hod: 365 mm, število osi: 8, skupna masa: 18.000 kg, skupna višina: 3.100 mm, stiskalna sila: 173 t, Ta 8-osna upogljalna stiskalnica TRUMPF TrumaBend V170 je bila izdelana leta 2003. Ima stiskalno silo 1700 kN, hod 365 mm in maksimalno dolžino upogiba 4080 mm. Razdalja med stebri je 3680 mm. Če iščete visokokakovostne možnosti upogibanja, razmislite o nakupu TRUMPF TrumaBend V170, ki ga ponujamo v prodajo. Za dodatne podrobnosti o tej napravi nas kontaktirajte. Prednosti naprave Tehnične prednosti naprave • Razdalja med stebri: 3680 mm • Razdalja med prečnim nosilcem in mizo: 535 mm Dodatne informacije Tedpfx Aex D Ilysnpod Naprava je še pod napetostjo. Tehnične specifikacije Dolžina upogiba: 4080 mm Dimenzije Globina naprave: 5000 mm

Stanje: rabljeno, skupna dolžina: 2.680 mm, skupna širina: 1.200 mm, skupna višina: 2.200 mm, Leto izdelave: 2001 Barva: Siva Lastna teža: 950 kg Cena: Na zahtevo Miza za obdelavo z vrtalnikom Hofmann TFS 1200 Serijska številka 127-01204 Leto izdelave 2001 7,8 kW, 16 A, 400 V Nastavljiv nagib za 45 stopinj. Aigner, priročnik Naprava za podajanje - Leto izdelave: 2001 - Serijska številka: 127-01204 - Moč glavnega motorja [kW]: 7,8 - Premer vretena [mm]: 40 - Dolžina mize [mm]: 2680 - Širina mize [mm]: 450 - Vreteno z nagibom: Avtomatsko - Min. nagib [°]: 0 - Max. nagib [°]: 45 - Naprava za podajanje: Da - Znamka: Masterwood - Tip: Euromeo - Število koles [kos]: 4 - Število hitrosti: 2 - Vodilo: Da - Znamka: Aigner - Min. hitrost vretena [rpm]: 3000 - Regulacija hitrosti vretena: Stopničasta - Dimenzije za transport: 2680 mm x 1200 mm x 2200 mm (d x š x v) - Teža za transport [kg]: 950 kg - Paketi za transport [kos]: 1 Finančne informacije Tjdpfx Aswl I E Esnpjd DDV: Navedena cena je brez DDV DDV/Davčna obravnava: Podjetniki lahko odbijejo DDV Dostava in prevzem starega stroja je možen kadarkoli za vse stroje iz industrijske ponudbe. Yorick Diebels