Časnikarstvo zavora

TRUMPF TrumaBend V170

Leto izdelave: 1997, obratovalne ure: 47.122 h, stanje: pripravljen za uporabo (rabljen), Krmilna enota Model: DA-65 Blagovna znamka: DELEM Gedsx D Ec Ajpfx Agwsip Dodatna oprema Hidravlični vpenjalni sistem Ta 6-osni upogibni stroj TRUMPF Trumabend V170 je bil izdelan leta 1997. Ima upogibno silo 1700 kN in največjo dolžino upogiba 4060 mm. Razdalja med stojali je 3680 mm, vključuje pa tudi hidravlični vpenjalni sistem. Razmislite o možnosti nakupa tega upogibnega stroja TRUMPF Trumabend V170. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Upogibanje

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) Gisdpfsw Iq Ugjx Agwsp - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: rabljeno, Leto izdelave: 2000, CNC upogibni stroj Proizvajalec: Trumpf Tip: Truma Bend V170 Leto izdelave: 2000 CNC krmiljenje: Delem Tlačna sila: 170 t Delovna širina: 4 m Gisdpex Di Hxofx Agwjp Bombiranje Zadnji prislon 6 osi Hidravlično vpenjanje orodja Višina: 2,9 m brez orodij Št.: 25226

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Press force: 1700 kN, bending length: 4000 mm, stroke: 215 mm, installation height: 365 mm, clearance width: 3680 mm, throat depth: 410 mm, feed rate: 200 mm/s, bending speed: 1–10 mm/s, return speed: 135 mm/s, working height: 1050 mm, control unit: Delem. Includes spare parts and accessories. Documentation available. Gedjtqfqijpfx Agwjip

Stanje: novo, Leto izdelave: 2025, BIEGEMASTER Doppelbieger – Modell XBend 6.1,25 Nutzlänge: 6.400 mm Biegeleistung Stahl 400 N/mm²: 1,25 mm Edelstahl (V2A) 600 N/mm²: 1,00 mm Aluminium 190 N/mm²: 2,00 mm Falzleistung (geschlossener Falz): 0,5 mm Stahl Ständeranzahl: 4 Stück Angetriebene Biegegelenke oben: 4 Stück Angetriebene Biegegelenke unten: 4 Stück Inkl. Touchscreen-CNC-Steuerung mit automatischem Tiefenanschlag Inkl. elektrischer Schere BIEGEMASTER Doppelbiegeanlage – Modell XBend 6.1,25 Arbeitslänge: 6.400 mm Biegeleistung Stahl 400 N/mm²: 1,25 mm Edelstahl 600 N/mm²: 1,00 mm Aluminium 190 N/mm²: 2,00 mm Falzkapazität (geschlossener Falz): 0,5 mm Stahl Ständer + Spannarme: 4 Stk. Angetriebene Gelenke (oberer Biegebalken): 4 Stk. Angetriebene Gelenke (unterer Biegebalken): 4 Stk. Inkl. Touchscreen-Steuerung sowie automatischem Hinteranschlag Inkl. elektrischem Schneider English translation for use on platforms like Machineseeker: BIEGEMASTER Up- and Down-Bending Machine – Model XBend 6.1,25 Working length: 6,400 mm Bending capacity Steel 400 N/mm²: 1.25 mm Stainless steel 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Number of frames: 4 pcs. Driven bending joints, upper beam: 4 pcs. Driven bending joints, lower beam: 4 pcs. Incl. touchscreen CNC control with automatic back gauge Incl. electric shear Gisdovhc Dpopfx Agwjp This wording uses standard machine tool terminology suitable for professional listings in the machinery sector.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Pressing force: 170 t Bending length: 4080 mm Distance between uprights: 3680 mm Throat depth: 410 mm Installation height: 385 mm Stroke: 215 mm Approach speed: 200 mm/sec Working speed: 1-10 mm/sec Return speed: 135 mm/sec Table width: 200 mm Table height: 1050 mm Operating hours: 25,430 h Oil capacity: 350 l Total power requirement: 29 kVA Machine weight approx.: 16,450 kg Dimensions L-W-H: 4620 x 2210 x 2885 mm Machine is in well-maintained condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) – Inspected condition – Machine video – ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control – swiveling, front left * High-resolution graphic display * Clear, user-friendly menus in operator language * Large tooling and product library * Graphical 2D programming Gisdpfjxcp Rbsx Agwep * Automatic bending sequence calculation and collision detection * Emergency stop button at the front - CNC axis configuration: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axes + CNC crowning - X axis – adjustment speed: 500 mm/sec * Max. backgauge travel: 860 mm - R axis – adjustment speed: 300 mm/sec * Max. travel: 250 mm - Z axis – adjustment speed: 1000 mm/sec * Max. travel: 3260 mm - CNC electromechanical table crowning - CNC electro-pneumatic die shifting (I axis) - WILA / TRUMPF hydraulic upper tool clamping - WILA / TRUMPF hydraulic lower tool clamping - 2x heavy-duty, movable front support arms - 1x moveable two-hand/foot operation control - 1x moveable foot switch - Side safety devices (swiveling doors) - Rear safety devices (sliding doors) - Original operating manual

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Delem, upogibna sila (maks.): 170 t, število osi: 4, tip kronanja: CNC krmiljen, Oprema: CE označba, nožno daljinsko upravljanje, spodnje orodje, varnostna svetlobna zapora, zgornje orodje, Rabljena hidravlična CNC upogibalka Trumpf Trumabend V170 naprodaj Podkategorija: Upogibne stiskalnice Tlačna sila: 170 ton Proizvajalec: Trumpf Model: V170 Trumabend Godpfex R Ul Aex Agwjip Stanje: rabljena CNC krmiljenje Trumabend DA65 2D Stroj s 4 osmi, vključno z i-osjo CNC zadnji odmerek v dveh oseh (os R in X) s 4 prsti na zadnjem odmiku CNC krmiljenje zgornjega batna nosilca (Y1, Y2) CNC kompenzacija upogibanja mize Premik matrice (i-os) Nadzor preko podstavka Električno nožno stikalo Varnostne svetlobne zavese

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Giodpfst Hw Iiex Agwop Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, Pressa piegatrice idraulica Marca: TRUMPF Modello: TrumaBend V170 Anno: 1999 Dati tecnici Costruttore: TRUMPF Modello: TrumaBend V170 Anno di costruzione: 1999 Ore di esercizio: 45.074 h (letto da display) Forza di pressatura: 170 t Lunghezza utile: 4000 mm Corsa: 215 mm Dimensioni: L 4,6 x P 2,70 (senza supporti piegatura 2,20 m) x H 2,70 m (altezza trasporto 2,5 m) Peso: ca. 16,5 t Equipaggiamento • CNC Delem DA con controllo grafico 2D • Assi controllati: Y1, Y2, X, R, Z1, Z2 • Scorrimento pneumatico delle matrici Gjdpfx Asx E Tpisgwoip • Bloccaggio idraulico degli utensili superiore + inferiore (sistema Wila/Trumpf) • Bombatura CNC controllata • 2 supporti per piegatura mobili • Predisposizione per misura angolo ACB • Punzone superiore OW210/S 28°/R1, H 140mm, L = 4000mm, segmentato • Matrice inferiore EV002W8 30°/R1, H 100mm, L = 4000mm, segmentata Tutte le informazioni sono senza garanzia. Dimostrazione disponibile in qualsiasi momento presso il nostro showroom.

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 887043, Offer 24557 Technical Data: - Maximum working length: 4060 mm - Column gap: 3680 mm - Maximum pressing force: 1700 kN - Maximum distance, table / ram: 385 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: Gijdpfxou T Nkno Agwjp - Downward approach speed (idle), max.: 200 mm/sec - Return speed: 135 mm/sec - Pressing speed (downwards): 1 to 11 mm/sec - Total drive power: 30 kW - Space requirements approx.: W 5600 x H 3000 x D 2400 mm - Weight approx.: 18,000 kg Equipped with: - 6-axis CNC control, DELEM - Two-hand control panel with foot switch - Crowning device - CNC-controlled backgauge with height adjustment 5 to 860 mm - Hydraulic upper and lower tool clamping - Die table shifting, pneumatically assisted

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Pressure: 80.0 t Bending length: 2550 mm Frame width: 2130 mm Throat depth: 420 mm Approach speed: 100 mm/sec Working speed: 10.0 mm/sec Return speed: 80.0 mm/sec Gsdpfx Agoxabnyowoip Stroke: 200 mm Installation height: 470 mm Table width: 60.0 mm Table height: 910 mm Operating hours: approx. 37,102 h Total power requirement: 9.0 kW Machine weight: approx. 5,750 kg Dimensions (L x W x H): 3100 x 2180 x 2540 mm Good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - CNC OPERATEUR controller for 8 axes: X1+X2, Y1+Y2, R1+R2, Z1+Z2 - CNC-controlled backgauge adjustment (X axes) - CNC-controlled vertical adjustment of backgauge fingers (R axes) - CNC-controlled left-right adjustment of backgauge fingers (Z axes) - Mobile two-hand operation & foot pedal - AMADA-type upper die crowning - Various tooling included - CE marking - Side safety guards (hinged doors) - Rear safety guard (hinged door) - 2x emergency-stop buttons on front - Operating manual