Widoberg nakup rabljenega (63)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 75 mm, moč: 1,5 kW (2,04 KM), vhodni tok: 16 A, Centreless belt grinder for pipes, GRIT GX752H + GCX + GXW - incl. pipe feeder - incl. coolant tank for wet grinding Prsdpfjucq Dnsx Aafoc - incl. grinding area with flat belt - mobile, mounted on a wheeled base

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 150 mm, višina brušenja: 100 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, GREIF 7-station through-feed flat grinding machine, wet grinding, suitable for square tubes and flat materials, equipped with 7 belt grinding stations, each with 4 kW power. Each station features frequency control, and all stations can be swivelled by ±15° for cross-grinding. Maximum grinding width: 150 mm; maximum grinding height: 100 mm. Contact wheel diameter: 200 mm. Grinding belt dimensions: 150 x 2500 mm. Features pneumatic belt tensioning and belt oscillation. Machine is supplied including return conveyor and paper belt filtration unit with a 1,500-litre capacity. Since the contact wheels are directly driven, this machine can also be used for polishing or brushing operations. On request, the machine can be offered fully refurbished. Prsdpfx Astq Twvoafjc

Stanje: generalkompletno obnovljen (rabljeno), 1 refurbished table polishing machine / table polishing automatic, make HAU, model T1000 (maximum workpiece length 1000 mm), with 1 polishing station model PES/3 and a control cabinet. The table was disassembled, checked for damage (defective parts were replaced), cleaned and newly painted. The guide shafts were refitted with new bearings and a new gearbox was installed. + Prodpfx Ajw Avpteafsc 1 polishing station model PES/3, 11 kW (pneumatic lift, 100 mm oscillation AND motorized height adjustment). Maximum disc width 400 mm, maximum disc diameter 400 mm The station was completely disassembled, checked for damage (defective parts were replaced), cleaned and freshly painted. The polishing shaft was completely re-bedded, including the bush bearing. The oscillation unit was also completely re-sealed. New motor, pulley and drive belt installed. + 1 new control cabinet for operating the above-described system. Table speed and polishing disc speed adjustable via frequency inverter.

Stanje: generalkompletno obnovljen (rabljeno), 1 overhauled table polishing machine / table polishing automaton, manufacturer HAU, model T1500 (max. part length 1500 mm), with 1 polishing station model PES/3 and one control cabinet. The table was disassembled, inspected for damage (defective parts were replaced), cleaned and repainted. The guide shafts were newly mounted and a new gearbox installed. Prodpfx Asw Au A Eeafsc + 1 polishing station, model PES/3, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Disc width max. 400 mm, max. disc diameter 400 mm. The station was completely dismantled, inspected for damage (defective parts replaced), cleaned and repainted. The polishing shaft was completely relubricated, including slide bush bearing. The oscillation unit was also newly sealed. New motor, pulleys and drive belts installed. + 1 new control cabinet for operating the above-described system. Table speed and polishing wheel speed can be regulated via frequency inverter.

Stanje: novo, Leto izdelave: 2025, DM1100 Z – NEW DESIGN – only €29,800-- Deburring up to 1100mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine features a single wide-belt station, which can be used for deburring parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, as it can be operated with both standard abrasive belts and non-woven/Scotch belts. Prjdpfx Ajimdmtoafjc With the help of an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge rounding machine. We also offer a part return system for this machine.

Stanje: zelo dobro (rabljeno), Continuous rotary table HAU R60-1800, equipped with 60 workpiece spindles arranged on a pitch circle diameter of 1800 mm. Features 3 polishing units, each with 7.5 kW power, polishing shafts with 50 mm diameter, maximum polishing disc width: 2 x 400 mm + 1 x 280 mm, maximum polishing disc diameter: 420 mm. Motorized longitudinal and height adjustment – the machine is equipped with a complete dispensing system for liquid polishing compound. Further images available on request. Pjdjm Nbubepfx Aafsrc

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, BULA MP133 Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide range of workpieces. Features: - 8 workpiece holders mounted on a pitch circle of 600 mm - 3 processing stations, each with a drive power starting at 4 kW, equipped with BULA Quick Lock System for polishing wheels - Polishing shaft diameter: 30 mm for BULA QuickLock - Max. wheel width: 150 mm - Max. wheel diameter: 350 mm - Footprint approx. 1900 mm width, 2400 mm depth, 1700 mm height The machine has been completely overhauled: cleaned, sandblasted, primed, and repainted. The BULA MP136 is equipped with new motors, gearbox, and a new control cabinet. All drives are steplessly adjustable via frequency converter. Also renewed: bearings, belts, screws, hoods, etc. Pedewvq Ahopfx Aaforc The machine is available immediately. Further technical details and price on request. Subject to prior sale. Optionally, the system can be supplied with a liquid polishing compound system, including 3 high-pressure dosing guns WIDOBERG HDP-2, brackets, timer, and pressure tank. The picture is for illustration purposes only!

Stanje: novo, The ML75 tube grinding machine is the ideal choice for polishing round, oval, and elliptical tubes up to Ø76mm. Depending on the configuration, the machine is available from EUR 9,900. Podpfjd Hfg Eex Aaforc The ML75’s planetary belt system features a compact design for finishing bent tubes. The machine can be equipped with an automatic feeding system for straight tubes. This new grinding machine is the answer for processing bent tubes with radii too tight for the ML100, and with diameters too large for the ML50. Polishing bent tubes with tight radii: The ML75’s planetary belt system offers a compact design for reworking tubes with small radii with maximum flexibility. Unlike other conventional systems, the planetary belt system reduces the friction heat on the tube surface. Straight tubes: The ML75 was developed for the processing of bent tubes. With a feeding system, the ML75 can be quickly converted for polishing straight tubes. Technical Data – ML75: Working capacity (Ø mm): 10–76.2 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 25x860 Abrasive belt speed (m/s): 3–22 Feed rate (m/s): 1–5 Abrasive belt motor (kW): 2.2 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 3.94 Power consumption (A): 10 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 230

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Predpfjtmqi Dex Aafoc The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. Prjdped Ixadjfx Aafsc The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. Predpfod Ixbzsx Aafsc The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. Prjdpfxod Ev Upj Aafjc A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200 Pedped Evcwefx Aaferc