Brusilnik s širokim pasom

NS Maquinas DM1100 Z ab € 29.800,--

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Kjdpfx Ajk Dpp Sjl Njdk Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: skoraj kot novo (rabljeno), Manesty D3B tablettenpers Seriennummer: 24D117 Kdjdjiy Nnyepfx Al Njk Manesty 16-Stationen-Tablettenpresse, bis zu 500 Tabletten pro Minute, maximaler Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Doosan Puma 300MC Osi C gnana orodja C-Axis 360° (0.001°) Leto 2007 Fanuc 21iTB z Manual Guide Vpenjalna glava 12 palcev (315mm) Samchully Kjdpfx Aloyrb Uro Njdk Prehod vretena 102mm Max. premer struženja 355mm Hodi osi: X-250mm Z-680mm Glava BMT 65 Konjiček Orodna sonda Izmetnik ostružkov, kad z črpalko za hlajenje Orodni nosilci Dokumentacija stroja Zelo dobro stanje

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: X-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm Pendulum machining right, fixed table X = 925 mm Pendulum machining left, 2-axis table X = 780 mm Kdodpoyqyfgjfx Al Njk Control: Heidenhain TNC 640 Tool magazine: 122 SK 40 Infinitely variable spindle speeds: 12,000 rpm Spindle torque: 120 Nm Drive power: 22 kW Fixed table dimensions: 920 x 540 mm Table load, fixed table: 2000 kg Max. workpiece size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load, rotary table: 500 kg B-axis swivel angle: -90°/+110° Workpiece size, rotary table: 600 x 500 x 400 mm Workpiece dimensions across both tables: 1500 x 500 x 400 mm Internal coolant supply: 70 bar Machine weight approx.: 10.5 t Space requirements approx.: 3.65 x 2.53 x 2.81 m Accessories: Removable handwheel HR 510 FS Rotoclear viewing window Automatic shut-off at end of program Workpiece measurement with Blum TC 52 probe Coolant gun at workplace The Spinner U5 1530 5-axis machining center with Heidenhain TNC 640 control is nearly new and in excellent condition. 122 SK 40 tool holders are included. A special Gressel vise for 5-axis machining on the rotary table is also included. The B and C axes feature a hydraulic brake for increased rigidity during static machining. All linear and rotary axes are equipped with direct measuring systems. "Advanced Function Set 1" Option 8: - Swiveling the machining plane through coordinate transformation - Cycles for cylindrical surface interpolation (cycles 27, 28, 29, and 39) - Mapping a contour programmed in the X-Y plane onto the cylindrical surface - Automatic feed rate calculation in mm/min for a rotary axis depending on the tool's distance from the rotary center (M116) - Three-axis interpolation for spatial circles in a swiveled machining plane "Active Chatter Control" Option 145: Increased material removal rate

Leto izdelave: 2006, stanje: generalkompletno obnovljen (rabljeno), HYDRAULISCHE PRESSE MECAMAQ PRESSKRAFT: 350 t HUB: 350 mm TISCHVERFAHRWEG LINKS-RECHTS: 600 mm TISCHVERFAHRWEG VORNE-HINTEN: 750 mm ANTRIEBSLEISTUNG: 15 kW Kodpfxofmqqls Al Nodk Abmessungen: Höhe: 2,9 m Breite: 1,9 m Länge: 1,3 m Gewicht: 5.700 kg

Stanje: rabljeno, Leto izdelave: 1984, x-travel 2500 mm y-travel 750 mm Kdsdpfetqqnwox Al Nek z-travel 1000 mm Table clamping surface 2550 x 800 mm Spindle taper SK 50 Control HEIDENHAIN, TNC 150 B Machine weight approx. 16 t

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Kdjdpfx Aled Ixads Njk Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 1999, stanje: rabljeno, Tractive force – max. 6.0 t Kodpfx Aljd Il A No Nodk Ram stroke – max. 1250 mm Space requirement approx. 1.20 x 1.20 x 3.25 m

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake Kdodpfx Ajcubatjl Nok - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BBT 30 (Big-Plus) - Spindle drive power: 12 kW - Spindle speed: 10,000 rpm LINEAR AXES - Travel X/Y/Z axes: 700/400/330 mm - Rapid traverse rate (X/Y/Z): 54 m/min - Feed rate (X/Y/Z): 1-30,000 mm/min TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 TABLE - Table size: 850 x 410 mm - Max. table load: 300 kg - Distance from table to spindle nose: 250–580 mm ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Footprint: 2,165 x 2,087 mm - Machine height: 2,345 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 3,207 h ACCESSORIES - CNC control: Fanuc 31i model B5 - 3-color status light ROTARY TABLE * Manufacturer: Häberle * Model: DTTiB * Travel 4th axis: 360° * Minimum resolution 4th axis: 0.001° * Travel 5th axis: -7/+100° * Minimum resolution 5th axis: 0.001° * Clamping type: Pneumatic - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant (TSC) - Chip conveyor: rear - Tool measuring probe: Renishaw - Workpiece measuring probe: Renishaw Kodpfx Alsx Tvizo Njdk - Electrical transformer - Machine vice - Tool holder