Widoberg nakup rabljenega (64)

Stanje: novo, - with lateral discharge opening - Total capacity 240 l - Dimensions approx. 1350 x 950 x 925 mm (h) Bwedpfjd Nnuisx Aa Sjh - Working container dimensions approx. 1235 x 480 x 460 mm (h) - Drive 1.5 kW - 380 V / 50 Hz - Max. speed 1500 rpm - PU-coated base approx. 15 mm - PU-coated side wall approx. 12 mm - Total weight approx. 400 kg - incl. metering pump - incl. control unit with speed regulation, 1000 – 1500 rpm - optionally with pneumatic soundproof cover - optionally with partition walls

Stanje: novo, Vibratory finishing machine with pneumatic separation section and soundproof cover - Total capacity approx. 720 l - Inner diameter of round trough approx. 1460 mm - Max. workpiece size 320 mm - PU coating: bottom 20 mm - PU coating: side wall 18 mm - Drive: 4 kW - Max. speed 1500 rpm - Total height approx. 1300 mm - Total weight 1270 kg Dosing pump - Precise dosing of compound and water - Capacity: 5 liters / 7 bar per hour Control cabinet - With speed control, 1000 - 1500 rpm - Main power switch and emergency stop button - Speed control via frequency converter - Timer - Control for dosing pump (starts and stops with the machine) - Speed display - Control for pneumatic soundproof cover - Control of the pneumatic separation flap Bwsdpfx Aasd Ai D Re Ssh

Stanje: dober (rabljeno), Attachment polishing machine HAU HR 4 for rotational parts up to a maximum diameter of 200 mm, featuring 2 processing units. The units are equipped with overhauled spray guns for liquid polishing compound. Maximum wheel diameter: 400 mm, maximum wheel width: 120 mm, shaft diameter: 35 mm. Machine similar to illustration. Bwodpezmbhefx Aa Sjh

Stanje: novo, Leto izdelave: 2012, linishing enota Bjdpfxobdnuas Aa Sswh

Stanje: novo, Vibratory Finishing System with Separation Section - Total volume approx. 420 l - Tub diameter approx. 1355 mm - Max. part size 240 mm Bwodpfjd Nnr Dox Aa Soh - PU lining, bottom 15 mm - PU lining, side wall 15 mm - Drive 1.1 kW - Max. rotational speed 1500 rpm - Total height approx. 1100 mm - Total weight 780 kg - Including dosing pump - Including control cabinet with variable speed control, 1000 - 1500 rpm

Stanje: novo, - with lateral discharge opening - total volume 380 l - dimensions approx. 1350 x 930 x 950 mm (H) - working tank dimensions approx. 1250 x 520 x 520 mm (H) Bwedsd Nnupopfx Aa Sjh - drive 1.5 kW – 380 V / 50 Hz - maximum speed 1500 rpm - PU-coated bottom approx. 16 mm - PU-coated side wall approx. 12 mm - total weight approx. 750 kg - incl. dosing pump - incl. control system with speed regulation, 1000 – 1500 rpm - optionally with pneumatic soundproof cover - optionally with partition walls

Stanje: novo, - with lateral discharge opening - Total volume: 53 l - Working volume: approx. 40 l - Dimensions: approx. 790 x 415 x 670 mm (H) - Working container dimensions: approx. 590 x 290 x 290 mm (H) - Drive: 0.55 kW - Max. speed: 1500 rpm Bodpfx Ajd I Dn Nsa Sjwh - PU-coated base: approx. 10 mm - PU-coated side wall: approx. 8 mm - Total weight: approx. 80 kg - incl. dosing pump - incl. control unit with speed regulation, 1000 – 1500 rpm

Stanje: novo, ESP Spray Cleaning Machines Bjdpfx Aast Rrkj Sswh The ESP series is designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable detergents. These machines feature very low operating costs and low consumption. The machine frame and body are made from high-grade, corrosion-resistant stainless steel. ESP machines are the optimal choice for removing oil, grease, and production residues from part surfaces, as well as for corrosion protection applications. The ESP range comes standard with a stainless steel pump, spray nozzles, heating elements, and a motorized basket construction. On request, these machines can also be equipped with a drying blower. Spray cleaning system for small to medium batch sizes, suitable for workshops, maintenance, or intermediate cleaning. Cleaning with hot water; spray cabin as top-loader. Depending on model: basket diameter 820–1250 mm, load capacity 80–300 kg, spray pressure 1.8–3.5 bar, heating 4.5–12 kW. Optional features: thermostat 0–90°C, timer, oil skimmer, filtration, loading and unloading trolley.

Stanje: novo, SprayClean Spray Cleaning Machines SprayClean systems are front-loading machines equipped with a pneumatically operated front door. Everest SprayClean machines are designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable detergents. SprayClean models feature extensive thermal insulation on fluid tanks, steam extraction, pneumatic front doors, and a motorized basket system as standard. Optional rinsing and drying processes can be integrated into these models according to customer requirements. Multi-stage systems are controlled via a PLC (programmable logic controller) system. Optional accessories include oil skimmers, oil separator units, filtration units, dosing pumps, loading trolleys, cabin housing insulation, and more. Bwsdpsd Hbp Ejfx Aa Sjh Rotary Washing System as Front Loader: Cleaning by high-pressure hot water spray, available in various build sizes: basket diameters from 900 to 1800 mm, load capacities from 300 to 800 kg, loading heights from 500 to 900 mm. Depending on the model: washing, washing & rinsing, or washing, rinsing & drying processes are available in a single machine. Special requirements can be accommodated on request. We would be happy to provide you with a detailed quotation.

Stanje: novo,

Stanje: novo, Leto izdelave: 2023, Pipe Drilling / Angular Drilling Machine, Drilling Automation TDM100 2D AT – automatic, with two opposing drilling units - Minimum quantity lubrication system - Manual material clamping - Automatic feed and automatic tube rotation - Maximum tube length: 3,000 mm - Positioning accuracy: +/- 0.2 mm - Drilling unit power: 2 x 2.2 kW Bjdpfxslgzyte Aa Sowh - Manual material loading and unloading - Drill heads swivel ±50° - Manual 360-degree swivel mechanism - Motor speed: 295 – 2,950 rpm - Operation via touch panel - Up to 100 programmable positions - Drilling unit lighting - Integrated tool cabinet - Round tubes up to 114 mm - Square profiles up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drilling diameter up to Ø 50 mm

Stanje: novo, SprayClean Spray Cleaning Machines SprayClean systems are front-loading machines equipped with a pneumatically operated front door. Everest SprayClean machines are designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable detergents. SprayClean models feature extensive thermal insulation on fluid tanks, steam extraction, pneumatic front doors, and a motorized basket system as standard. Optional rinsing and drying processes can be integrated into these models according to customer requirements. Multi-stage systems are controlled via a PLC (programmable logic controller) system. Optional accessories include oil skimmers, oil separator units, filtration units, dosing pumps, loading trolleys, cabin housing insulation, and more. Rotary Washing System as Front Loader: Cleaning by high-pressure hot water spray, available in various build sizes: basket diameters from 900 to 1800 mm, load capacities from 300 to 800 kg, loading heights from 500 to 900 mm. Depending on the model: washing, washing & rinsing, or washing, rinsing & drying processes are available in a single machine. Special requirements can be accommodated on request. Bwodpfxj T D R De Aa Soh We would be happy to provide you with a detailed quotation.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Enostranski polirni stroj, tip 72711 (Metabo, IBS, IMM) - Skupaj je na voljo 5 enakih strojev - Moč motorja: 7,5 kW - 1500 vrt/min - Vključno z zaščitnim pokrovom za poliranje Bwodpfjx Iuvvox Aa Soh - Premer polirne gredi: 35 mm - Višina polirne gredi: približno 900 mm - Stroji so bili razstavljeni, očiščeni, premazani s temeljnim premazom, na novo prebarvani, opremljeni z novimi ležaji za gred in motor ter novimi klinastimi jermeni

Stanje: dober (rabljeno), Internal grinding machine for pots/hollowware up to Ø 400 mm x 600 mm. Bwodpfx Aobdfr Tja Seh Hydraulically movable grinding heads, alternating operation. Complete with vacuum base holder and vacuum pump, incl. hydraulic power unit and control cabinet.

Stanje: pripravljen za uporabo (rabljen), - Double-sided grinding and polishing stand - with x 1.5 kW Bwsdpfx Asdz Uzboa Soh - Speed 1420 rpm - Polishing shaft height 600 mm - Tapered polishing shaft

Stanje: dober (rabljeno), Rotary indexing table HAU RK 6-1200, equipped with 6 work spindles and 4 polishing units type PES, each with 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure vessel), including control cabinet. Price and further details on request. Bwjdpo R Ecgsfx Aa Ssh

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel Bedpfxjlgvkij Aa Sewh - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Bjdpfx Aaepugwie Sswh The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. Bsded Hintspfx Aa Sjwh The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: dober (rabljeno), Roller conveyor, frame and substructure made of stainless steel, conveying height 1170 mm, roller width 400 mm, conveyor length 3000 mm Bwjdouhd Scopfx Aa Soh - used, very good condition, immediately available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22-009, Rotational Spray Parts Washer YM-850 The YM-850 rotational spray parts washer is designed for efficient cleaning of industrial components using hot, high-pressure water and biodegradable detergents. This machine features extremely low operating costs and minimal consumption. The machine frame and housing are constructed from high-quality, corrosion-resistant stainless steel. This machine is the ideal choice for cleaning oil, grease, and production residues from the surfaces of workpieces, as well as for corrosion protection applications. The YM machine comes standard with a stainless steel pump, spray nozzles, heating elements, and a construction with a motorized basket. - Spray washing system for small to medium batch sizes - Ideal for workshops, maintenance, or intermediate cleaning - Cleaning with hot water - Spray cabin with top-loading design Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating element output: 7.5 kW Maximum load weight: 120 kg Connection: 220-380 Volt - 3 phase Timer: 0-30 min Thermostat: 0-60°C Bsdpfxstwmxys Aa Sswh Stainless steel body: 430 AISI Filter baskets: 2 units – 2-3 mm perforation Internal filter: 100µ

Stanje: delavnici obnovljeno (rabljeno), Rotary Table Polishing Machine, manufacturer Bula, model MP81 for sale. Continuously rotating machine for polishing, brushing, grinding, and deburring a wide range of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, equipped with the Bula Quick Lock system for polishing discs. Polishing shaft diameter 25 mm. The machine has been completely overhauled: machine frame sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency inverters. Bwedslccvmjpfx Aa Soh Subject to prior sale. Optionally, the system can be supplied with a liquid polishing paste system, consisting of 1 WIDOBERG HDP-2 high-pressure dosing gun, bracket, timer, etc., and pressure tank.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 150 mm, višina brušenja: 100 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, GREIF 7-station through-feed flat grinding machine, wet grinding, suitable for square tubes and flat materials, equipped with 7 belt grinding stations, each with 4 kW power. Each station features frequency control, and all stations can be swivelled by ±15° for cross-grinding. Maximum grinding width: 150 mm; maximum grinding height: 100 mm. Contact wheel diameter: 200 mm. Grinding belt dimensions: 150 x 2500 mm. Features pneumatic belt tensioning and belt oscillation. Machine is supplied including return conveyor and paper belt filtration unit with a 1,500-litre capacity. Since the contact wheels are directly driven, this machine can also be used for polishing or brushing operations. Bwodpfjtq Twvex Aa Ssh On request, the machine can be offered fully refurbished.

Stanje: novo, The ML100 tube grinding machine is the ideal choice for surface grinding and polishing of round, oval, and elliptical tubes—including both straight and bent tube profiles. Depending on configuration, the machine is available from EUR 9,900. The ML100’s planetary belt system enables belt grinding without tube rotation, delivering outstanding surface results. The infeed system feeds straight tubes safely into the grinding station, ensuring consistent and productive surface finish quality. Minimal vibration on long tubes: With the ML planetary belt system, the tube itself does not rotate. Instead, the abrasive belts orbit around the tube while it remains stationary and moves straight through the machine. Polishing of straight or bent tubes: The ML100 is engineered for finishing straight tubes (automatically) or bent tubes (manually). Quick adjustment: The automatic infeed can be easily detached via hinges, allowing for processing of bent tubes. Reduced heat generation: Bsded Hfnbopfx Aa Sjwh Unlike conventional systems, the planetary belt system significantly reduces frictional heat on the tube’s surface. Oval tubes: The ML100 safely processes the surfaces of oval or elliptical tubes. Maximum abrasive belt adaptability to holes or gaps in the tube. Technical data – ML100: Working capacity (Ø mm): 10 – 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Current consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: novo, The FC120 ZK grinding machine has been designed to ensure simple operation when grinding or polishing square tubes and flat profiles. This machine processes workpieces up to 120 mm wide using three possible combinations of abrasive belt and brush heads. The FC120 ZK combines an abrasive belt head (Z) with a brush head (K). Abrasive Belt Head: Post-processing of the surface during the grinding process of square tubes and flat profiles – removes major defects and burrs. Brush Head: Final finishing after grinding – gives the surface a soft and uniform grain finish. The FC120 ZK ensures high and consistent processing quality of stainless steel square tubes and flat profiles – tube by tube. Bwedpfod Ix I Asx Aa Sjh Abrasive Belt Change: Abrasive belt changes can be performed within seconds, without tools. NS Máquinas can supply various conveyor belt solutions to enable grinding of smaller parts as well. Technical Details - FC120 ZK Working capacity (Ø mm): 120x120 Number of belt stations (Z): 1–2 Number of brush stations (K): 0–1 Abrasive belt dimensions (mm): 120x1850 Brush belt dimensions (mm): 120xØ200 Abrasive belt speed (m/s): 20 Brush belt speed (m/s): 15 Feed speed (m/s): 12 Abrasive belt motor per head (kW): 3 Brush motor per head (kW): 2.2 Feed motor (kW): 0.25 Total power (kW): 5.5 (ZK) Power consumption (A): 12 (ZK) Dust extraction port per head (Ø mm): 80 Dimensions (mm): 1450x800x1800 (ZK) Weight (kg): 500 (ZK)