Korito Vibrator

KAYAKOCVIB TVM 40 mit seitl. Entleerungsöffnung

Stanje: dober (rabljeno), Leto izdelave: 2013, Fanuc Robodrill α-D21SiA5 Machining Center TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Traverse Paths X-axis: 300 mm Traverse Paths Y-axis: 300 + 100 mm Traverse Paths Z-axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 stations Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Gedpfx Aoxflq Aofweua Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF SUPPLY Includes (not a complete list): - Fanuc Robodrill α-D21SiA5 Machining Center - 4th Axis Rotary Table - Coolant Pump and Chip Tray - Precise scope of delivery according to photo documentation No guarantee can be given regarding the correctness, completeness, or up-to-dateness of the information provided.

Stanje: dober (rabljeno), Unit: REWA chamber filter press, used Type: 470-15-25K-HP Design: side-bar guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Gusdjqakbrepfx Afwea Filter cloths: optionally available, tailored to the specific medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): Flange, tie rods stainless steel, PP or rubber-lined Material (non-product-contacting parts): Stainless steel Purchase or rental: Inspection of the equipment can be arranged by appointment at our facility. Other information: We supply this unit used, fully functional or refurbished and customized to your requirements. Are you interested in renting or purchasing this unit? Contact us, we are happy to assist you.

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6,000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool magazine capacity: 22 stations, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control unit: Heidenhain TNC 426. An on-site inspection is possible. Gujdpfx Afov Uqb Newsa

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: Gujdpfx Ajuxft Eofwoa - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. Gusdopugwispfx Afwea The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: rabljeno, Tenon cutter / Dowel saw LOSER model AA220 - USED - Capacity: 7500/1500 dowels per hour Gsdpfoqpdkcsx Afwoua - Dowel diameter capacity: 6–18 mm.

Stanje: rabljeno, Leto izdelave: 1996, Tehnične podrobnosti: Gedsvpt Eyspfx Afwoua Teža stroja pribl.: 1750 kg Motor žage: 2,2 kW Skupna potreba moči: 5 kW Hitrost rezanja: 17 - 90 m/min Premer reza: 320 mm Maks. območje reza: 320 x 320 mm Dolžina tračnega lista: 4.930 x 34 x 1,1 mm Dolžina podajanja: max. 9x 600 mm Potrebni prostor pribl.: 2,6 x 2,4 x 1,40 m Avtomatska tračna žaga, ravni rez, min. premer reza 10 mm, min. dolžina reza 6 mm, min. dolžina ostanka 15 mm (avtomatika 80 mm), maks. masa materiala 400 kg/m, rezervoar za hladilno tekočino 60 l, zmogljivost črpalke 16 l/min, napetost vpenjanja nastavljiva 20-60 bar, transporter ostružkov 2.400 x 950 mm, valjčna proga 2.200 x 950 mm, 5 kosov rezervnih tračnih listov 4.930 x 34 x 1,1 mm, navodila za uporabo

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm Gsdpsuha Umsfx Afweua - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Cell with Kuka KR 180 Grinding Robot Grinding cell Berger 2012 (External grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm Guedpfx Ajg Saqvjfwja 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 control system - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Gripper exchange cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture each detail as seen in the video.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Description to follow! Gsdsx A H Rxopfx Afwsua