Single Stw 150 nakup rabljenega (19)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Single Temperiertechnik STW 1-6-30-M4 regulator temperature. Na voljo 4 kosi. Cena: 300 EUR na kos. V dobrem delovnem stanju. Oglejte si tudi naše druge oglase. Lsdpfx Aewf Anhegwsru

Stanje: dober (rabljeno), Leto izdelave: 1998, Auxiliary lifting device Brand: Single Type: STW 1-6-25-ZN Lrsdpfx Asfcy Drsgwsu Year approx. 1998

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" Lrjdpfx Agsfnvwqowsu *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: dober (rabljeno), Système de régulation de température d’eau Single TL 1-12-B10/20-TKN6 Lrjdoxl A Daspfx Agweu Domaines d’application : • Régulation de température dans le traitement des plastiques • Fabrication d’outils et de moules • Industrie chimique • Applications de test et de laboratoire Plage de température : jusqu’à 90 °C Volume externe max. : 61 l Puissance de chauffage : 12 / 18 / 24 kW Puissance de refroidissement : 35 kW (20 °C d’admission) / 100 kW (15 °C d’eau de refroidissement) Débit max. : 200 l/min Pression max. de refoulement : 3,8 bar Puissance moteur pompe : 3,0 kW Raccords fluide caloporteur : G 1¼" Raccords eau de refroidissement : tuyau 18 mm Dimensions (L × l × H) : 690 × 400 × 880 mm Poids env. : 75 kg Moyen caloporteur : eau Pour des données techniques détaillées et des instructions de traitement, nous recommandons vivement de consulter les fiches techniques d’origine ou de contacter directement le fabricant. Vous trouverez d’autres articles – neufs et d’occasion – dans notre boutique ! Frais de livraison internationale sur demande !

Leto izdelave: 2017, obratovalne ure: 19.979 h, Stanje: dober (rabljeno), The temperature control unit from the brand Single is offered for sale; Ledpfeuau Dtjx Agwjru Advanced 180°C temperature control unit Membrane keypad Medium: Water Unit on castors Heating capacity: 9 kW Cooling capacity: 35 kW and much more...

Stanje: dober (rabljeno), Temperature controllers, temperature sensors, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller - Manufacturer: single, temperature controller Digitemp Q - Model: TQD 3110 D Lredpfx Agjudqbioweu - Measuring range: 0 to 399 °C - Box dimensions: 220/130/H135 mm - Weight: 0.8 kg

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Ljdsg Ezaropfx Agworu Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 2017, Stanje: dober (rabljeno), Single Compact K-160-9-24, 160°C medium water, 11 kW Year of manufacture: 2017 Price: €4,950 Contact: Mr. Rainer Eckerle Lrsdpfx Ajrupr Degwju

Stanje: zelo dobro (rabljeno), Single STL 1-12-B10/20-TKN6 tempering technology Lrsdpfx Agoi A H Ipowou

Stanje: generalkompletno obnovljen (rabljeno), • Maschine hergestellt in Deutschland, Abrollständer von Massenzana. • Single Facer 2200 mm, Profil B, neue Friese-Riffelwalzen. • Drei brandneue Friese-Dampfleitungen. • Neue Kondensatventile. • Brücke Ledpfx Aekyt Iiogwjru • Zwei Abrollständer – Massenzana • Leimküche, zwei Tanks (2 + 3 Tonnen) • Längsschlitzer-Riller • Umroller, Rollenausstoßer • Robuster Querschneider • Dampfgenerator Zafa, Heizöl, 8-Tonnen-Tanks • Alle Lager, Riemen usw. wurden bedingungslos erneuert (alle Teile absolut neu).

Stanje: novo, moč: 250 kW (339,91 KM), Leto izdelave: 2025, Der Mehrzylinder-Hydraulik-Kegelbrecher ist eine fortschrittliche Art von Kegelbrecher, die für höhere Produktivität und bessere Brechleistung im Vergleich zu herkömmlichen Einzylinder-Kegelbrechern entwickelt wurde. Nachfolgend finden Sie wichtige Merkmale und Informationen zu Mehrzylinder-Hydraulik-Kegelbrechern: 1. Aufbau und Funktionsweise: - Mehrzylinder-Hydraulik-Kegelbrecher verfügen typischerweise über drei oder mehr Zylinder. - Die Brechkammer wird zwischen dem festen Außentrichter (Mantel) und dem beweglichen Innentrichter (Konkave) gebildet. - Die Zylinder steuern die Bewegung des Innentrichters und ermöglichen so einen hocheffizienten und gleichmäßigen Brechvorgang. 2. Hydrauliksystem: - Jeder Zylinder ist mit einem eigenen Hydrauliksystem ausgestattet, wodurch eine unabhängige Steuerung der Brechkammer möglich ist. - Das Hydrauliksystem dient zur Einstellung der Austragsöffnung, zur Fremdkörperfreigabe (Schutz vor Überlast) sowie als Überlastschutz. 3. Einstellbare Austragsöffnung: - Die Austragsöffnung kann einfach angepasst werden, um die Korn­größe des Endprodukts zu steuern. 4. Automatisierungs- und Steuerungssystem: - Mehrzylinder-Hydraulik-Kegelbrecher verfügen häufig über moderne Automatisierungs- und Steuerungssysteme. - Diese können speicherprogrammierbare Steuerungen (SPS/PLCs) und Bedienerschnittstellen (HMIs) für einen komfortablen Betrieb und Überwachung umfassen. 5. Anwendung: - Mehrzylinder-Hydraulik-Kegelbrecher eignen sich zum Brechen harter und mittelharter Materialien in Branchen wie Bergbau, Metallurgie, Baustoffindustrie und Straßenbau. - Besonders effektiv sind sie beim Zerkleinern von Materialien mit hoher Härte und abrasivem Index. 6. Vorteile: - Höhere Brechleistung und Durchsatz im Vergleich zu Einzylinder-Kegelbrechern. - Bessere Kornform des Endprodukts durch gleichmäßigen Brechvorgang. Lrodjq Nd Rbjpfx Agweu - Verbesserte Zuverlässigkeit und Wartungsfreundlichkeit. - Erhöhte Sicherheit durch die hydraulische Überlastsicherung. 7. Nachteile: - Möglicherweise höhere Anschaffungskosten als Einzylinder-Kegelbrecher. - Wartung und Reparatur sind unter Umständen aufwendiger. 8. Modelle und Spezifikationen: - Mehrzylinder-Hydraulik-Kegelbrecher sind in verschiedenen Modellen wie der HPT-Serie, der HP-Serie und weiteren mit unterschiedlichen technischen Spezifikationen verfügbar. 9. Hersteller: - Zahlreiche Hersteller produzieren Mehrzylinder-Hydraulik-Kegelbrecher. Namhafte Hersteller bieten dabei in der Regel zuverlässige und hochwertige Maschinen an. Bei der Auswahl eines Mehrzylinder-Hydraulik-Kegelbrechers sollten Sie Ihren spezifischen Bedarf prüfen, verschiedene Modelle hinsichtlich Ausstattung, Kapazität, Aufgabegröße und gewünschter Endkorngröße vergleichen und auf den Ruf sowie auf Erfahrungsberichte zum Hersteller und konkreten Modell achten.

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW *Dimensions: - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory Lodsg Ewwrspfx Agwsru - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Leto izdelave: 2017, Stanje: dober (rabljeno), Single Adv. WP5 180-12-220 water, 180°C 15 kW Zero production hours! Year of manufacture: 2023 Price: €8,500 Ledsrupt Nopfx Agwjru Contact person: Mr. Rainer Eckerle

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), Troslojni rotacijski bubanj sušara je industrijski sušač koji se koristi za smanjenje ili uklanjanje vlage iz materijala. Naziv potječe od tri rotirajuća bubnja kroz koja materijal prolazi, a svaki bubanj ima specifičnu ulogu u procesu sušenja. Ova vrsta sušare često se koristi u proizvodnji rasutih materijala, uključujući minerale, poljoprivredne proizvode i biomasu. Ključne značajke i komponente troslojne rotacijske bubanj sušare: 1. Troslojni dizajn: - Materijal za sušenje prolazi kroz tri rotirajuća bubnja ili cilindra, pa otuda naziv „troslojni”. Svaki bubanj ima posebnu funkciju u procesu sušenja. 2. Protok materijala: - Materijal ulazi najprije u unutarnji bubanj. Nakon početne faze sušenja prelazi u srednji, a zatim u vanjski bubanj, pri čemu se u svakom prolasku dodatno suši. 3. Izvor topline: - Toplina se najčešće osigurava pomoću sustava za izgaranje, kao što su plamenik ili peć, postavljenih na jednom kraju bubnja. Vrući plinovi nastali procesom izgaranja prolaze kroz rotirajuće bubnjeve i prenose toplinu na materijal. 4. Protok zraka: - Sušara je projektirana za optimalan protok zraka kroz bubnjeve, što omogućuje učinkovito sušenje. Kod troslojnog dizajna, materijal i vrući plinovi kreću se u suprotnim smjerovima (kontrakurentno), čime se povećava prijenos topline i učinkovitost sušenja. 5. Prekidači materijala (lifteri): - Lifteri su unutarnji elementi bubnjeva koji podižu i rasipavaju materijal tijekom rotacije. Ovakvo gibanje poboljšava prijenos topline i omogućuje ravnomjerno sušenje. 6. Vrijeme zadržavanja: - Troslojna konfiguracija omogućuje produljeno vrijeme zadržavanja materijala unutar sustava sušenja. Dulja izloženost toplini povećava učinkovitost sušenja, što ova rješenja čini pogodnim za materijale s visokim udjelom vlage. 7. Sekcija za hlađenje: - Nakon što materijal prođe kroz sva tri bubnja, na izlazu iz sušare može biti integrirana sekcija za hlađenje radi snižavanja temperature osušenog materijala prije istovara. 8. Područja primjene: - Troslojne rotacijske bubanj sušare koriste se u raznim industrijama: u poljoprivredi (sušenje žitarica i drugih kultura), u preradi minerala (sušenje ruda ili koncentrata), te u biomasi (sušenje drvne sječke i drugih organskih materijala). 9. Učinkovitost i potrošnja energije: - Sušare ovog tipa poznate su po visokoj učinkovitosti zbog produljenog vremena sušenja i efektivnog prijenosa topline. Ipak, troše više energije u usporedbi s jednostrukim ili dvostrukim rotacijskim sušarama. Lredpsq Nfuzsfx Agwju Prilikom odabira troslojne rotacijske bubanj sušare važno je uzeti u obzir vrstu materijala koji se suši, potrebni stupanj smanjenja vlage i ukupne zahtjeve procesa. Pravilno projektiranje i vođenje procesa ključno je za postizanje optimalnih rezultata sušenja.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Ledeg Ey T Eepfx Agworu Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits Ledsg Ey Ufjpfx Agweru - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Lredpfx Agog Ey Rfowou Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Lrsdpfx Agoftm Hrowsu Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy Lodpfx Asfnvvijgwjru - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*