Regulator temperature

Single Temperiertechnik STW 1-6-30-M4

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Buderus SB735 low-temperature boiler Year of manufacture: 2007 Output: 1200 kW Burner: Weishaupt oil or gas burner available on request Njdpfx Agjnr Ek Uoxewf

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg Nwedpfxevxzw Ne Agxsf - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. With a total of 62,235 operating hours, the machine is in used but operational condition.

Stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3,000 W Heat compensation -20°C: 3,000 W Test chamber internal dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Nodpfehh H Hiox Agxewf Fuse (customer side): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69 dB(A) Side cable ports: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Model: VTS 7018-5 For your safety as a buyer, please note the following information! The following work is carried out on all our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharge with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: Used Scope of delivery: (See photo) (Specifications subject to change or error!) Should you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), Leto izdelave: 1990, CNC Universal Milling Machine, Manufacturer: MAHO Model: MH 500 W Control: MAHO 432 Spindle Mount: ISO 40 Spindle Speeds: 20 - 4000 rpm Travels: X 500 mm / Y 380 mm / Z 350 mm Nwsdpfxsr Igv Re Agxef Table Load Capacity: 250 kg The machine is in good condition, coming from toolmaking. Machine dimensions: Width 1500 mm / Depth 2000 mm / Height 1800 mm / Weight: 2100 kg Machine documentation available. The machine is under power and can be demonstrated.

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Njdsddv Itspfx Agxswf Available in approx. 4 weeks!

Stanje: zelo dobro (rabljeno), Buderus G 605 nizkotemperaturni kotel, 1020 kW Nwedpewynuijfx Agxjf

Stanje: zelo dobro (rabljeno), Type: Weiss WT3-340/70 Very good condition Weiss temperature chamber with S!MCON / 32 controller, air-cooled (Refrigerant R-404A; can be converted to R452A upon request) Test chamber volume: approx. 335 liters Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Main fuse (on-site): 16 A slow-blow Nwjdpfx Asv Edd Segxof Sound pressure level approx. 58 dB(A) (measured at 1 m distance, 1 m height from front) Temperature testing data: Temperature range: -72 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature gradient (per IEC 60068-3-5): 1 to 4 K Temperature change rate (per IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerants: R-404A / R-23 Weight: 585 kg For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Recharge with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run with calibrated measuring devices. Condition: used / Sehr guter Zustand (very good condition)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Please refer to the images and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. Njdpjtudyqsfx Agxowf The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our website to view this and other available offers. The stated company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are reserved.

Stanje: kot nova (razstavni stroj),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Vbrizgalni stroj Engel Victory 330/60 TECH Nsdpfx Agjxwviasxswf Leto izdelave: 2007 Zapiralna enota: Zapiralna sila: 600 kN Dimenzije plošče (miza): 720 mm Višina orodja: 600 mm Hod odpiranja: 900 mm Hod izmetalnika: 115 mm Sila izmetalnika: 125 mm Vbrizgalna enota: Premer polža: 35 mm Vbrizgalni volumen: 154 cm³ Vbrizgalni tlak: 2400 bar Teža stroja: 5.300 kg