Weinig Uniplan 23 nakup rabljenega (502)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
WEINIG
Mali oglas
San Giovanni Al Natisone
125 km
Weinig U22N štiristranski skobelni stroj z 8 vreteni, rebrasta miza, tesno postavljen pogon, s stran
WeinigU22N
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Štiri-stranski skobeljni stroj znamke Weinig model U22N, po obnovi.
Miza 22 cm z rebrasto delovno površino.
Lsdpfxex Syrks Adkehd
8 vreten v sestavi:
- spodnje: 4 kW
- desno: 5,5 kW
- levo: 5,5 kW
- desno: 7,5 kW
- zgornje: 7,5 kW
- spodnje: 5,5 kW
- zgornje: 7,5 kW
- univerzalno: 5,5 kW
Pogonski motor: 4 kW
Motor za dvig/spust: 0,85 kW
Skupna moč: 53,35 kW
Samodejno bočno podajanje.
Zelo vsestranski stroj, primeren tako za dolge kose (s stranskim podajalnikom) kot za kratke kose (bližji pogon in rebrasta miza).
Odlično ohranjen.
Premer vreten: 400 mm
Mali oglas
Oberkochen
470 km
štiristranska skobeljna
WEINIGProfimat 26 Super_Fenster
Pokliči
Stanje: rabljeno, Leto izdelave: 2001, Number of spindles: 5 units
Working width: 230 mm
Planing height: 120 mm
Length of jointer table: 2000 mm
Feed speed: 5–24 m/min
Four-side planer Weinig Profimat 26 S
Summary:
- 5 spindles (bottom, right, left, top, bottom)
- Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge
- Working width (with tool cutting circle 125 mm): 20–230 mm
- Working height (with tool cutting circle 125 mm): 8–120 mm
Detailed description:
1ST SPINDLE
- First lower horizontal spindle
- Motor with brake, 5.5 kW
- Diameter: 40 mm
- Speed: 6,000 rpm
- Tool cutting circle: 125–145 mm
Lhedeyuzczjpfx Adkjd
- Axial adjustment 5 mm
- Rebating device
- Hardened table insert in front of 1st lower spindle
2ND SPINDLE
- First right vertical spindle
- Motor with brake, 7.5 kW (shared with left vertical spindle)
- Diameter: 40 mm
- Speed: 6,000 rpm
- Tool cutting circle, 15 mm below table level: 100–200 mm
- Tool cutting circle, 40 mm below table level: 100–180 mm
- Max. tool diameter behind fence: 180 mm
- Max. profiling depth: 35 mm
- Axial adjustment 40 mm
- Right spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm
- Insertion segment: 125 mm
3RD SPINDLE
- First left vertical spindle
- Shared motor with 1st right vertical spindle
- Diameter: 40 mm
- Speed: 6,000 rpm
- Tool cutting circle, 15 mm below table level: 100–200 mm
- Tool cutting circle, 40 mm below table level: 100–180 mm
- Max. tool diameter behind fence: 180 mm
- Max. profiling depth: 35 mm
- Axial adjustment 40 mm
- Insertion segment: 125 mm
4TH SPINDLE
- First upper horizontal spindle
- Motor with brake, 7.5 kW
- Diameter: 40 mm
- Speed: 6,000 rpm
- Tool cutting circle: 112–200 mm
- Max. profiling depth: 35 mm
- Axial adjustment 40 mm
- Upper horizontal spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw diameter 200 mm
- Split pressure shoe in front of upper spindle, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded
- Pneumatic glazing bead discharge after upper spindle, height-adjustable
5TH SPINDLE
- Second lower horizontal spindle
- Motor with brake, 4.0 kW
- Diameter: 40 mm
- Speed: 6,000 rpm
- Tool cutting circle: 112–200 mm
- Max. profiling depth: 15 mm
All profiling spindles are dynamically balanced for high concentric running accuracy
Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge
FEED SYSTEM
- Mechanical feed, steplessly adjustable 5–24 m/min, with brake – 2.2 kW
- Infeed roller before 1st lower tool pneumatically controlled "up/down"
- Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning
- Feed roller adjustment in relation to left spindle, axial 35 mm
MACHINE ELECTRICS
- Operating voltage: 400 Volt (range 380–420 Volt), 50 Hz
- Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1
Further information on request.
Mali oglas
Juszczyn
530 km
Oblikovalni stroj
weinigProfimat 26S
Pokliči
Stanje: zelo dobro (rabljeno), Štiristranski skobeljni stroj Weinig Profimat 26S
Delovna širina 230 mm
Delovna višina 130 mm
Ledpfxjyvhkis Adkjhd
Število vreten 6
Razporeditev vreten:
Spodaj
Levo
Desno
Desno
Zgoraj
Spodaj
Hitrost pomika nastavljiva z variatorjem
CE certifikat
Tehnična dokumentacija

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Tauberbischofsheim
555 km
Prevozni sistem
WeinigUV SOLO
Pokliči
Stanje: rabljeno, Dolžina pribl. 4.000 mm
Ljdpfx Adsvn N Ihjkjhd
Delovna višina pribl. 900 mm
Teža pribl. 2.500 kg
Povratni transport / mehanizacija, primerna za Weinig Univar, za transport celotnih okenskih kril, plošč ali podobno velikih obdelovancev
Mali oglas
Tauberbischofsheim
555 km
Avtomatski stroj za zgibanje
WeinigUnivar 10
Pokliči
Stanje: rabljeno, Leto izdelave: 1997, Teža pribl. 4.000 kg
Lsdpfx Aelf H Sqsdkshd
Krmiljenje Sütron BT20
Število vreten: 4 kos
Avtomatski stroj za preoblikovanje WEINIG UNIVAR 10 iz UC-Matic linije za okna, brez funkcije.
- Stroj ni popoln
- Podrobnosti na zahtevo
- Slika podobna.
Mali oglas
Maulbronn
562 km
Avtomatsko okno
WEINIGUNICONTROL 06
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 87960, skupna višina: 2.700 mm, skupna širina: 2.500 mm, skupna dolžina: 9.000 mm, skupna masa: 5.000 kg, premer žaginega lista: 400 mm, vhodna napetost: 380 V, proizvajalec krmilnikov: WEINIG, WEINIG UNICONTROL 06 avtomatski stroj za okna
- Obratovalna napetost: 380 V
- Frekvenca: 50 Hz
- Stranski pritisk, delovna širina: 30 - 220 mm
- Obdelovalni profili, širina profila: 30 - 220 mm
- Višina profila: 30 - 100 mm
- Dolžina profila: 2600 mm
- Vključno s transportnim trakom
- Širina traku: 250 mm
- Prav tako vključuje razne rezkalne glave
Pozor: Izdelek je treba obvezno prevzeti med 01. in 10.06.2016 na dogovorjen datum.
Ljdpfxeyu Ir As Adkehd
FCA D-75433 Maulbronn – naloženo na tovornjak
Mali oglas
Spatenhof
94 km
Oblikovalni stroj
WeinigProfimat 26 Super
Pokliči
Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder
Working width: 20 - 230 mm (up to 260 mm)
Lhodpoyi Dw Djfx Adksd
Working height: 8 - 120 mm (up to 140 mm)
5 working spindles, 40 mm spindle diameter
Long infeed table (approx. 2000 mm)
Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW
Pneumatic pressure feed rollers
Continuous cardan feed: 5 - 24 m/min, stepless adjustment
Feed roller before jointer
Push-button control panel
Automatic lubricant pump
Mechanical digital readouts
CE-certified machine
Year of manufacture: 2001
Supplied without tooling
Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION
Machine is connected and ready for demonstration at the exhibition center
Available from stock in Lieboch
Mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 12 NC
Pokliči
Stanje: rabljeno, Leto izdelave: 2004, Slotting spindle 2 pcs.
Number of milling units: 7 pcs.
Spindle diameter: 50 mm
CNC control, Weinig PC-Nexus
Weinig Uncontrol 12
with radial and axial NC spindles as well as VARIO table
.....
Machine is already professionally dismantled and stored in 73447 Oberkochen
Technical Data Summary
(for any additionally included accessories, please inquire)
.....
Cross-cut saw
.....
> Cross-cut saw electronic, horizontally adjustable steplessly
> Number of tools: 1 pc.
> Spindle speed: 3000-6000 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3.7 kW
> Laser guide for cut recognition
> Axial adjustment range 150 mm NC axis, electronically stepless
> Radial adjustment range pneumatically adjustable in 8 positions e.g. for edge rounding from above
Rounding unit
.....
> Position: horizontal below
> Axial adjustment range together with cross-cut saw.
Electronic length stop
.....
> Length: 4500 mm
1. Tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment range: 580 mm NC axis, stepless
> Spindle speed: 2,800-4,000 rpm
> Tool diameter: 380-400 mm
> Outfeed counter, full clamping length countered
2. Tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment range: 580 mm NC axis, stepless
> Spindle speed: 2,800-4,000 rpm
> Tool diameter: 380-400 mm
> Outfeed counter, full clamping length countered
Transfer conveyor
.....
For transferring parts to the longitudinal processing, including
Double part separation before entry into longitudinal processing.
1. Profiling spindle (climb and conventional milling)
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment range 350 mm NC axis, stepless
> Radial adjustment range 80 mm NC axis, stepless
> Spindle speed: 6000 rpm
> Tool diameter min.: 140 mm
> Tool diameter max.: 232 mm
Lhodpfxjyrtzkj Adkod
2. Profiling spindle
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment range 350 mm NC axis, stepless
> Radial adjustment range 80 mm NC axis, stepless
> Spindle speed: 6000 rpm
> Tool diameter min.: 140 mm
> Tool diameter max.: 232 mm
3. Profile milling unit (grooving device from above)
.....
> Position: horizontal above
> Motor power: 3.0 kW
> Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Axial adjustment range 30 mm NC axis, stepless
> Radial adjustment range 125 mm NC axis, stepless
Mali oglas
Provincia autonoma di Bolzano - Alto Adige
283 km
Oblikovanje in rezkanje
WEINIGHydromat 1000
Pokliči
Stanje: rabljeno, No. 3176
WEINIG Hydromat 1000 Planing and Moulding Machine
Used, year of manufacture 2007
6 Spindles: bottom-right-left-top-top-bottom
Electronic feed: 6 - 60 m/min
Working width: 80 - 150 mm
Working height: 23 - 65 mm
Finished lamella width: 4 - 15 mm
Max. number of lamellae: 16 pcs
Lamella lengths: 400 - 4000 mm
1st spindle horizontal bottom:
Brake motor 11 kW, 6000 rpm
Spindle diameter 45 mm
Tool circle 125 - 180 mm
2nd spindle vertical right:
Brake motor 7.5 kW, 6000 rpm
Diameter 45 mm
Tool circle 112 - 250 mm
Max. profile depth 35 mm
Axial adjustment 80 mm
3rd spindle vertical left:
7.5 kW, 6000 rpm
Diameter 45 mm
Tool circle 112 - 250 mm
Max. profile depth 35 mm
Axial adjustment 80 mm
Pressure shoe in front of spindle, swiveling, pneumatic roller pressure
4th spindle horizontal top:
15 kW, 6000 rpm, diameter 45 mm
Tool circle 112 - 250 mm
Max. profile depth 35 mm
Axial adjustment 45 mm
Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic
5th spindle horizontal top as saw spindle:
Brake motor 37 kW, 5000 rpm
Diameter 45 mm
Axial adjustment reduced to 25 mm
Tool circle 112 - 250 mm
Max. cutting depth 35 mm
Axial adjustment 45 mm
Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic
6th spindle horizontal bottom as saw spindle:
Brake motor 30 kW, 5000 rpm
Axial adjustment reduced to 25 mm
Diameter 45 mm
Tool circle 112 - 250 mm
Max. cutting depth 35 mm
Axial adjustment 45 mm
All profiling spindles with high-performance bearings
Electronic feed 7.5 kW
Adjustment travel of feed rollers opposite left spindle, axial 35 mm
Shortened roller distance opposite right spindles
Running meter counter, electric, with 2 counters
Short infeed table (1.2 m) with 2 driven rollers above the table
1 driven, toothed roller in table, lateral pressure roller
Automatic Waxilit/lubricant pump
Machine with 4-roller outfeed, oscillating shafts extended to 200 mm
2 driven, toothed rollers in outfeed table
2 driven, toothed rollers in machine table
Lhsdpfxju Agh Ss Adkjd
Pressure beam ahead of and discharge after upper spindle with mechanical digital display
DigiSet (digital double display) for left and top spindles
Electric height adjustment of upper spindles and feed
Machine already dismantled and stored
Sale on behalf of customer, ex location near South Tyrol, without transport and installation
Subject to errors in description and price
Transport and loading by us available as an option
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
The sale is made in "as is" condition
Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: "sold as inspected"
Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery
Terms of payment: prices plus statutory VAT, payment before collection or dispatch
Delivery terms: ex site
Mali oglas
Rattelsdorf
527 km
Oblikovanje in rezkanje
WEINIGHydromat 25, hartverchromte Tischplatten
Pokliči
Stanje: zelo dobro (rabljeno), delovna širina: 250 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 250 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 30.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: hidravlični, vrsta vhodnega toka: trifazni, število vreten: 9, vhodna frekvenca: 50 Hz, Weinig Hydromat 25
9 spindles,
Working width: 250 mm,
Working height: 140 mm,
Spindle diameter: 50 mm,
Feed: 30 kW / 6 - 100 m/min,
Spindle arrangement:
1-Bottom (11 kW) – with hydraulic clamping
2-Right (9 kW)
3-Left (11 kW)
4-Right (9 kW)
Lodsq Au Tlspfx Adkjhd
5-Top (15 kW) – with hydraulic clamping
6-Bottom (7.5 kW) – with hydraulic clamping
7-Top (7.5 kW) – with hydraulic clamping and straight jointer
8-Top (11 kW) – with hydraulic clamping and straight jointer
9-Bottom (11 kW) – with hydraulic clamping and straight jointer
11 powered rollers in the table
Mali oglas
Nemčija
650 km
CNC obdelovalni center za okna in vrata
WEINIGConturex 2 C 114
Pokliči
Stanje: rabljeno, Leto izdelave: 2009, Max. workpiece length: 4,500 mm
Milling spindle: 1 unit
Lhjdpowunwysfx Adksd
Main motor: 20 kW
Control: Siemens
Model: Weinig Conturex 2 C 114
-----
Working width: 40–260 mm
Working height: 25–110 mm
2 x PowerGrip clamp tables, 2 x 2,280 mm
-----
Workpiece length: 200–4,500 mm
Processing of workpieces exceeding 2,700 mm in length is carried out using a repositioning cycle.
Main spindle 1:
-----
Motor with brake: 20 kW
HSK 63F
Speed electronically adjustable: 2,000–18,000 rpm
Max. tool length from HSK 63F reference surface: 290 mm
With C-axis
Tool magazine:
-----
Number of positions: 30
Slot spacing: 100 mm
Fixed multi-spindle drilling head
-----
For horizontal and vertical drilling and milling operations without tool change
-----
Price ex-location
Prices for
Dismantling and loading onto customer’s truck
Transport within Germany and abroad
as well as reassembly
commissioning
and, if required, new profiles available on request!
Including used tools (drawings available on request!):
-----
Wood: IV 68, 78, 88 in- and outward opening, with fitted weather bar
Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78
Lift-and-slide doors IV 68 and 78
Front doors IV 68 and 78
Pivot windows
Corner joints: mortise/tenon & dowel
Technical data as per manufacturer – no guarantee!
Detailed technical description available on request!
Mali oglas
Katowice
548 km
Proizvodna linija za okna in vrata
WeinigConturex
Pokliči
Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006.
Machine number: 105554
Machine type: Conturex
Year of construction: 2006
Wiring diagram number: FP 3013
Supply voltage: 3×400 V
Supply frequency: 50 Hz
Control voltage: 230 V
Control frequency: 50 Hz
Auxiliary voltage: 24 V
Auxiliary frequency: 0 Hz
Main fuse: 139 A
Lodpfx Adjyu Sn Ujkohd
Current capacity: 160 A
Power: 61 kW
If you have any questions or require further information, please send us a message or contact us by phone.
CNC machining centre for the processing of wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). 2 four-axis working heads for simultaneous machining (20kW each). Automatic loading and unloading tables. Optionally, a comprehensive tooling package is available (tool holders, angle aggregates, profiling heads).
The machine is currently in continuous operation.
The machine was purchased in 2024 after a complete overhaul.
Since then it has been running for 15 months on a single shift.
Technical data:
Working ranges:
Minimum width: 25 mm
Maximum width: 260 mm
Minimum height: 10 mm
Maximum height: 150 mm
Minimum length: 180 mm
Maximum length: 4500 mm
The maximum working length can be achieved by multiple re-clamping of the element.
Milling spindle no. 1:
Number of axes: 4
Motor power S1: 20 kW
Motor speed range: 0–18,000 rpm
Rotation directions: Right / Left
C-axis: Yes
Feed rates:
- Z-axis: 60 m/min
- Y-axis: 120 m/min
- C-axis: 450°/s
Hand tool changer for milling spindle no. 1:
- Type: disc
- Capacity: 18 tools
- Tool holder spacing: 100 mm
- Maximum single tool weight: 10 kg
- Maximum total tool weight: 130 kg
- Tool holder type: HSK F 63
Milling spindle no. 2:
Motor power S1: 20 kW
Motor speed range: 0–18,000 rpm
Rotation directions: Right / Left
C-axis: Yes
Feed rates:
- Z-axis: 60 m/min
- Y-axis: 120 m/min
- C-axis: 450°/s
Hand tool changer for milling spindle no. 2:
- Type: disc
- Capacity: 18 tools
- Tool holder spacing: 100 mm
- Maximum single tool weight: 10 kg
- Maximum total tool weight: 130 kg
- Tool holder type: HSK F 63
External tool magazine:
- Type: linear
- Capacity: 120 tools
- Tool holder spacing: 80 mm
- Tool holder type: HSK F 63
Loading table: automatic cross-feed
Unloading table: automatic cross-feed
CNC control:
PLC control: Siemens S7
Mobile control panel.
Controller:
- Operating system: Microsoft Windows
- Modem for data transfer and diagnostics
- Touchscreen
Siemens Sinumerik 840 D
Number of axes: 4
Machine is fully operational and currently in continuous production.
At extra cost, the following equipment packages are available: 8 angle aggregates, 3 standard toolholder packages, 17 new spindle packages for heads.
Mali oglas
Bergatreute
441 km
Večrezna žaga
Weinig / RaimannProfirip 310 BV
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2020, še vedno zelo dobro ohranjena večlistna žaga z 1 premičnim žaginim listom; motor 22 kW
Ledpfx Adoxyirtjkshd
Mali oglas
Wijchen
922 km
Štiri-stranske skobeljnice Weinig Unimat 500 leto 2006
WeinigUnimat 500
Pokliči
Stanje: rabljeno, Leto izdelave: 2006, skupna širina: 4.600 mm, skupna višina: 1.830 mm, Dimensions (L x W x H): 217 x 460 x 183 cm
Price: On request
- Year of manufacture: 2006
- Documentation available: No
- CE marking present: Yes
- CE certificate available: No
- Serial number: 107402
- Number of spindles [pcs]: 4
- Spindle 1:
- Spindle diameter [mm]: 40
- Spindle 2:
- Spindle diameter [mm]: 40
- Spindle 3:
- Spindle diameter [mm]: 40
- Spindle 4:
- Spindle diameter [mm]: 40
Lhedpfxownig No Adked
- Infeed table length [mm]: 1780
- Feed motor [kW]: 5.2
- Feed drive: Cardan drive
- Extraction nozzle diameter [mm]: 140
- Voltage [V]: 400
- Shipping dimensions: 2170mm x 4600mm x 1830mm (l x w x h)
- Shipping units [pcs]: 1
Financial information
VAT: The stated price is net, plus VAT
VAT/margin scheme: VAT deductible for businesses
Delivery and trade-in possible at any time for all types of industrial equipment
Yorick Diebels
Mali oglas
Juszczyn
530 km
Oblikovalni stroj
WeinigProfimat 26 Fortec + EM11
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Štiri-stranski skobeljni stroj Weinig Profimat 26 Fortec + EM11
Delovna širina: 230 mm
Delovna višina: 130 mm
Število vreten: 5
Razporeditev vreten:
Spodaj 5,5 kW
Levo
Desno 11 kW
Zgoraj 7,5 kW
Lsdjyn Et Repfx Adkjhd
Spodaj 5,5 kW
Podajalnik materiala Weinig EM 11
Pnevmatski pritisni valji, razdeljeni v 3 sekcije
Hitrost podajanja nastavljiva s frekvenčnim pretvornikom: 5-24 m/min
CE certifikat
Tehnična dokumentacija
Mali oglas
Juszczyn
530 km
Formier
WeinigProfiamt 22N
Pokliči
Stanje: zelo dobro (rabljeno), Four-Sided Planer Weinig Profimat 22N
Working width: 230 mm
Working height: 120 mm
Number of spindles: 5
1. Bottom spindle: 4 kW
2. Right spindle
3. Left spindle: 5.5 kW
4. Top spindle: 5.5 kW
Ledpfx Aev If I Dsdkohd
5. Universal spindle: 4 kW
Pneumatic material pressure rollers
Feed speed adjustable via variator: 6–22 m/min
Feed motor: 2.2 kW
Automatic worktable lubrication
Air cushion in the worktable
Infeed table length: 1970 mm
Mali oglas
Nizozemska
969 km
Štiri-stranska skobeljnica Weinig Unimat Gold
WeinigUnimat Gold
Pokliči
Stanje: rabljeno, Rabljeni stroj
Letnik izdelave: 2004
5000 delovnih ur
Širina skobljanja: 230 mm
Višina skobljanja: 120 mm
Število vreten: 6
Vreteni spodaj: 2
Vreteno desno: 1
Vreteno levo: 1
Vreteni zgoraj: 2
Razporeditev vreten: spodaj-desno-levo-zgoraj-zgoraj-spodaj
Moč motorjev v kW: 11-7,5-7,5-11-11-11
Maks. hitrost vreten: 6800 obr/min
Premer vretena: 40 mm
Maks. podajalna hitrost: 30 m/min
Podajanje brezstopenjsko
Podajanje: 4 kW
Glavni motor: 11 kW
Predskobljalni rezkar
Kromirana površina delovne mize
Lhsdpeywpufofx Adksd
Dolžina vstopne mize: 2000 mm
Poganjani namizni valji
Ročna črpalka za mazanje
Zgornji pritisk pnevmatski
Pogonski valji podajalnika: kardan
Skupna priključna moč: 80 kW
Dimenzije: 4100 x 2050 x 1900 mm
Mali oglas
Nemčija
653 km
WEINIG / DIMTER Weinig Unicontrol 10-5
WEINIG / DIMTERWeinig Unicontrol 10-5
Pokliči
Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information.
• Capacity
• Working width: 40–220 mm
• Working height (longitudinal processing): 40–100 mm
• Working height (cross processing): 40–100 mm (grain height 80 mm)
• Workpiece length (longitudinal): min. 220 mm + 2 x tenon length
• Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter
• Feed unit (cross processing)
• Motor power: 0.3 kW
• Feed speed: 3–25 m/min
Lhedpfox S Sk Eox Adksd
• Workpiece clamping: 2 hold-down clamps
• Length stop: with scale and magnifier for measurement of sash or frame external dimensions
• Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm
• Double workpiece package: single or double part feed system, with cross separation and retention system
• 1st workpiece (lying against stop) wood width: 55–90 mm
• 2nd workpiece wood width: 130 mm
• Feed unit (longitudinal processing)
• Motor power: 2.2 kW
• Feed speed: 4–18 m/min (continuously adjustable via frequency inverter)
• Feed roller spacing: 100/120 mm
• Feed roller width: 30/50 mm
• Feed roller diameter: 95 mm
• Processing units
• Cross-cut saw
• Motor power: 3 kW
• Spindle diameter: 40 mm
• Spindle speed: 2800 rpm
• Tool stroke: max. 400 mm
• Axial adjustment: pneumatic against four-position turret
• 1st spindle with tenon and slot
• Motor power: 11 kW
• Spindle diameter: 50 mm
• Spindle speed: 3250 rpm
• Tool stroke: max. 320 mm
• Tool clamping length: 320 mm
• Axial adjustment range: 240 mm
• Number of tool positions: 4 x 80 mm
• Axial adjustment: hydraulic
• 1st profiling spindle
• Motor power: 11 kW
• Spindle diameter: 50 mm
• Spindle speed: 6000 rpm
• Tool diameter: max. 232 mm
• Tool reference circle: 130–140 mm
• Tool clamping length: 320 mm
• Axial/radial adjustment range: 240/80 mm
• Number of tool positions: 4 x 80 mm
• Axial adjustment: hydraulic
• 2nd profiling spindle
• Motor power: 11 kW
• Spindle diameter: 50 mm
• Spindle speed: 6000 rpm
• Tool diameter: max. 232 mm
• Tool reference circle: 130–140 mm
• Tool clamping length: 320 mm
• Axial/radial adjustment range: 240/80 mm
• Number of tool positions: 4 x 80 mm
• Axial adjustment: hydraulic
• Mechanical spindle brakes
• For profiling spindle(s)
• For cross-cut saw and profiling/cutting units
• Profile milling unit (horizontal, top; in front of last profiling spindle)
• Radially switched: 2 positions
• Axially switched: 2 positions
• Motor power: 3 kW
• Spindle diameter: 40 mm
• Spindle speed: 5850 rpm
• Tool stroke: 130 mm
• Tool clamping length: 40 mm
• Axial adjustment range: 52 mm
• Radial adjustment range: 125 mm
• Profile milling unit (vertical, right; at end of machine)
• Radially indexed: 2 positions
• Axially indexed: 2 positions
• Motor power: 3 kW
• Spindle diameter: 40 mm
• Spindle speed: 5850 rpm
• Tool stroke: 210 mm
• Tool clamping length: 160 mm
Mali oglas
Nemčija
653 km
WEINIG / DIMTER Unimat 500
WEINIG / DIMTERUnimat 500
Pokliči
Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Ta WEINIG Unimat 500 je bila izdelana leta 2005. Robustni lesnoobdelovalni stroj z delovnim območjem 230 x 120 mm in petimi vreteni omogoča učinkovito obdelavo z nastavljivo podajalno hitrostjo od 4 do 30 m/min. Moč vretena znaša 4 kW za vstopni in izstopni vreteno ter 7,5 kW za desno/levo in zgornje vreteno. Izkoristite priložnost za nakup tega WEINIG Unimat 500 lesnoobdelovalnega stroja. Za dodatne informacije o stroju nas kontaktirajte.
Dodatna oprema
• Približno 70 rezilnih glav Z4
• Več sto novih polizdelkov rezil z nazobčanim hrbtom
Lsdpjyaihpjfx Adkshd
Prednosti stroja
Kvalitativne prednosti stroja
• Vodilo za utore in hidravlične matice
Tehnične prednosti stroja
• Delovno območje (širina x višina): 230 x 120 mm
• Število vreten: 5
• Spremenljiva hitrost podajanja: 4–30 m/min
• Moč vretena: spodaj (vstop): 4 kW / desno / levo: po 7,5 kW / zgoraj: 7,5 kW / spodaj (izstop): 4 kW
Mali oglas
Nemčija
653 km
WEINIG / DIMTER Opticut S90
WEINIG / DIMTEROpticut S90
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details.
• Saw Blade
• Diameter: 500 mm
• Bore: 30 mm
Lhsdpfx Adoylmmmekod
• Adjustable saw blade speed: 40-100% via frequency converter
• Workpiece Capacity
• Infeed length (min/max): 400-6,300 mm
• Width (min/max): 20-300 mm
• Thickness (min/max): 10-120 mm
• Maximum cutting height: 120 mm
• Minimum cross-section: 20 x 10 mm
• Maximum cross-section 1: 215 x 120 mm
• Maximum cross-section 2: 300 x 40 mm
• Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length
• Table tilt: 10°
• Movement and Accuracy
• Positioning speed (return stroke): max approx. 180 m/min
• Positioning speed (forward stroke): max approx. 60 m/min
• Positioning accuracy: +/- 0.1 mm
• Motors and Power
• Pusher motor power: 5.1 kW
• Saw motor power: 7.5 kW
• Total electrical power: approx. 15 kW
• Control and Interface
• Control unit: OptiCom Pro with 18.5" touchscreen
• Display resolution: 1366 x 768 pixels
• Degree of protection (front): IP65
• Interface: USB port and Ethernet network connection
• Data format: CSV (ASCII) for import/export
• Operating Resources and Environment
• Voltage: 400 V / 50 Hz
• Operating pressure: 6-8 bar (min.)
• Air consumption: approx. 250 NL/min
• Extraction nozzle: Diameter 125 mm
• Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h
• Noise level (idle): ≤ 85 dBA
Mali oglas
Nattheim
457 km
Obrat za proizvodnjo oken
WeinigUnicontrol 10
Pokliči
Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim
Lhsdpfxjvwdmwj Adkjd
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Oberkochen
470 km
Avtomatski stroj za zgibanje
WEINIGUnivar 6 CNC Spindeln
Pokliči
Stanje: rabljeno, Number of spindles: 3 pcs.
Number of tool sets: 8 pcs.
Spindle diameter: 50 mm
Dimensions (L/W/H): 4250 x 1850 x 2300 mm
! MACHINE FUNCTION TESTED AND READY FOR DEMONSTRATION !
!!! Detailed technical description from the manufacturer, additional machine images
and machine videos – if available – can be found at the end of this technical description as an attachment !!!
# 6988 Weinig Univar 6 CNC Spindles Overhauled
.....
Technical Data Summary
(For additional included accessories, please inquire)
...
...
1. Profiling Spindle (Climb-cut spindle with automatic plunge)
...
> Climb-cut for tear-free rebating
> Position: vertical right
> Number of tools: 1
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tool clamping length: 120 mm
> Motor: 11.0 kW
2. Profiling Spindle
...
> Position: vertical right
> Number of tools: variable, CNC-controlled
> Spindle stroke vertical: variable, CNC-controlled
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tool clamping length: 320 mm
Ledpfxoymf Eks Adkehd
> Motor: 11 kW
3. Profiling Spindle (Fitting milling unit)
...
Position: vertical right
Spindle diameter: 40 mm
Tool clamping height: 160 mm
Motor: 3 kW
Adjustment: radial and axial indexed to 8 positions via pneumatic turret
Additional features
...
> Online-capable
> PC-Nexus screen control
> Rebate carriage for milling sash frame widths under 500 mm. Automatic pneumatic clamping
Extraction port diameter:
Profiling spindle 1: 140 mm
Profiling spindle 2: 140 mm
Fitting spindle: 120 mm
If the technical specifications of this machine do not meet your requirements,
please contact us. Our experienced team will gladly assist you with potential modifications
or help you find a machine that matches your needs!
Technical specifications according to the manufacturer – without guarantee!
All prices plus statutory VAT.
Subject to changes and errors in the technical details and information.
Mali oglas
Rattelsdorf
527 km
Stroj za brušenje nožev
WeinigRondamat 980
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Weinig Rondamat 980
Year of manufacture: 2010
Technical data:
Max. tool width: 330 mm
With PowerLock: 322 mm
Tool diameter: 100 - 300 mm
With PowerLock (optional): 100 - 250 mm
Ledpfx Aewvvylsdkjhd
Grinding wheel diameter: 125 - 200 mm
Spindle speed, frequency-controlled: 1,500 - 4,600 rpm
Grinding spindle drive: 1.5 kW
Mali oglas
Kežmarok
525 km
Sistem za optimizacijo prečnega rezanja
WEINIG DimterOpticut 200 Elite
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2005, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2005.
Moč motorja: 7,5 kW
Samodejna vstopna miza: 5,10 m (pretočni sistem)
Samodejna izstopna miza
Lhodpfx Aextxg Hedksd
6 izmetalcev na levi izstopni mizi.
Optimizacija z avtomatsko zaznavo napak in avtomatskim programiranjem rezalnih shem.
Na voljo takoj.
CE oprema. Dokumentacija vključena.
Mali oglas
Wijchen
922 km
Štiri strani skobelni stroji Weinig Variomat 2009
WeinigVariomat
Pokliči
Stanje: rabljeno, Leto izdelave: 2009, Four-sided Moulder
Weinig Variomat
Year of manufacture: 2009
Serial number: 113680
400 V, 32 kW, 64 amps.
Min.–max. working width: 20–230 mm
Min.–max. working height: 8–120 mm
Maximum tool diameter of vertical spindle: 232 mm
Maximum horizontal tool spindle diameter (except 1st): 200 mm
Infeed table length: 1950 mm
Feed speed: 6–12 m/min
Spindle diameter: 40 mm
Spindle speed: 6000 rpm
Ljdpfx Adswnhh Ejkshd
1st bottom spindle: 5.5 kW
2nd and 3rd spindles, left and right: 7.5 kW each
4th top spindle: 11 kW
5th bottom spindle: 5.5 kW
Please note: The 5th spindle is not functional.
Dimensions: 4000x1400xH1350 mm, weight: 2500 kg.
- Special features:
Description: Problem with the 5th spindle
- Year of manufacture: 2009
- Documentation available: No
- CE marking: Yes
- CE certificate: No
- Serial number: 113680
Financial information
VAT: The indicated price is plus VAT
VAT/differential taxation: VAT deductible for businesses
Delivery and trade-in possible at any time for all industrial equipment.
Yorick Diebels
Olajšamo vam iskanje: "weinig uniplan 23"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Weinig Uniplan 23 (502)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Idx 23
- Plan
- Planer Thicknesser U
- Strani Planer
- Unimat 23 E
- Weinig Hydromat 23
- Weinig Powermat 2400
- Weinig Powermat 400
- Weinig Powermat 500

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec






















































































































































































































































