Okenski sistem
WEINIG Unicontrol 6 NC-Spindeln

Name: WEINIG Unicontrol 6 NC-Spindeln
Brand: WEINIG
Availability: InStock

Stanje

Rabljeno

Lokacija

Oberkochen Nemčija

Okenski sistem WEINIG Unicontrol 6 NC-Spindeln

Prikaži karto

Podatki o stroju

Opis stroja:: Okenski sistem

Proizvajalec:: WEINIG

Model:: Unicontrol 6 NC-Spindeln

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Oberkochen

Klic

Prodaja strojev

Ste že objavili oglas za svojo rabljeno napravo? Prodajte prek Machineseeker brez provizije.
Več o prodaji strojev

Podrobnosti ponudbe

ID ponudbe:: A18375846

Št. reference:: 1305-2774

Nazadnje posodobljeno:: dne 19.05.2025

Opis

Keyway Spindle 1 pc.
Number of Milling Units: 5 pcs.
Spindle Diameter: 50 mm
Control System: Weinig, PC-Nexus
#2774 Weinig Unicontrol 6 with NC Spindles
Machine is cleaned and fully inspected prior to delivery

Technical Data Summary
(Please enquire about any additional included accessories)

Pos. 1: Cross-Cut Saw
-----
> Number of Tools: 1 pc.
> Spindle Speed: 2,800 rpm
> Spindle Diameter: 40 mm
> Max. Tool Diameter: 400 mm
> Motor Power: 3 kW
> Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding
> Laser Guidance for cutting section detection

Pos. 2: Rounding Unit, Horizontal Lower
-----
> Position: horizontal, lower
> Motor Power: 1.5 kW
> Spindle Diameter: 20 mm
> Clamping Length: 25 mm
> Spindle Speed: 9,000 rpm
> Max. Cutting Circle: 130 mm
> Axial Adjustment mechanically linked with cross-cut saw
> Radial Adjustment pneumatically controlled, on/off

NC-Controlled Length Stop
-----
> Length: 3,500 mm
> Electronic length stop

Pos. 3: Tenoning and Keyway Spindle
-----
> Number of Tools: variable, stepless adjustment, NC controlled
> Tool Clamping Length: 320 mm
> Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled
> Spindle Speed: 3,500 rpm
> Max. Cutting Circle: 320 mm
> Spindle Diameter: 50 mm
> Max. Tool Diameter: 320 mm
> Motor Power: 11 kW

Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling)
-----
> Position: vertical, right
> Number of Tools: 1 pc.
> Tool Clamping Length: 120 mm
> Spindle Speed: 6,000 rpm
> Spindle Diameter: 50 mm
> Max. Cutting Circle: 232 mm
> Motor Power: 7.5 kW

Pos. 5: 2nd Profiling Spindle
-----
> Position: vertical, right
> Number of Tools: variable, stepless adjustment, NC controlled
> Tool Clamping Length: 320 mm
> Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled
> Spindle Speed: 6,000 rpm
> Spindle Diameter: 50 mm
> Max. Cutting Circle: 232 mm
> Motor Power: 11 kW

2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions

Sash Bar Guide consisting of:
Guide rail at the stop (climb milling section),
Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle.

Pos. 6: Profiling Milling Unit, Horizontal Upper
-----
> Clamping Length: 40 mm
> Spindle Diameter: 40 mm
> Motor Power: 3.0 kW
> Speed: 9,000 rpm
> Max. Cutting Circle: 130 mm
> Axial Adjustment: 30 mm, 8 positions
> Radial Adjustment: 125 mm, 8 positions

Pos. 7: 3rd Profiling Spindle (Fitting Spindle)
-----
> Position: vertical, right
> Tool Clamping Length: 160 mm
> Axial Adjustment: 115 mm, 8 positions
> Radial Adjustment: 110 mm, 8-position turret
Fjdpfxsvu Hghj Ah Dsgh
> Spindle Speed: 5,850 rpm
> Spindle Diameter: 40 mm
> Max. Cutting Circle: 210 mm
> Motor Power: 3.0 kW

Pos. 8: Profile Milling/Grooving Unit, Bottom
-----
> Motor Power: 3.0 kW
> Tool Clamping Length: 125 mm
> ...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Dokumenti

18375846-01.pdf

Ponudnik

Registriran od: 2002

109 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 7364 ... oglasi

+49 7361 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Oberkochen

470 km

Okenski sistem
WEINIGUnicontrol 6 NC Spindeln

Klic

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles The machine is cleaned and thoroughly inspected prior to delivery. Summary of technical specifications (Please inquire about any optionally included accessories) Position 1: Crosscut Saw ----- > Electronic crosscut saw, horizontally adjustable, stepless > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cutting position detection > NC length stop, mounted on slot table included Crosscut saw positioning integrated into control system. > Length: 3500 mm Position 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Spindle vertical stroke: variable, infinitely adjustable up to 254 mm via NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Position 3: 1st Profiling Spindle (Climb and Counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Fgjdpfx Ajvu Hfqsh Doh Position 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Spindle vertical stroke: variable, stepless up to 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail on the stop (area of climb spindle), Sash support rail from above in the area of the vertical right profile milling unit and profiling spindle. Position 5: Horizontal Profile Milling Unit, Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment travel: 30 mm, 8 positions via pneumatic turret > Radial adjustment travel: 125 mm, 8 positions via pneumatic turret Position 6: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment travel: 115 mm, 8 positions via pneumatic turret > Radial adjustment travel: 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebatting device for tear-free rebating > Double-part package > Return conveyor for single-person operation: lamella conveyor > Screen control > Angled sash device > Electronic angle display for angled sashes > Industrial PC, PC control/NEXUS > Weinig type production program > Supplied without machining tools No original photos available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 ...

Poglej podrobnosti

Oglašujte tukaj