CNC obdelovalni center za okna in vrata

SCM Accord 40 FX mit Werkzeugen

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin Rsdjwvqklopfx Acyjw • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic glazing bead saw by Schüco is available. Saw blade diameter: 400mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Rodewu Ez Nepfx Acysw

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Rodpfx Acstzld Ujyow

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, which includes: - Single-lane elevator - Three-lane elevator - 24-head weigher with 1L hopper - 32-head weigher with 1L hopper - KEN Hygiene System EWD 50 (Weigher auxiliary equipment washing station) - Platform with stairs Redpfx Aopxm Ugecyjw - Distribution tools – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set was only used for equipment testing, with approx. 100 operating hours. The line was dismantled by authorized Cabinplant and Multivac service teams.

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Redpfx Aeilg Hdjcyew Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: Rsdpfovu Hgbjx Acysw - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 Povsem avtomatski stoječi, Območje reza 5.300 x 2.200 mm (širina reza x višina reza), Premer žaginega lista: 300 mm, Rodjx Rr D Aspfx Acysw Krmiljenje za vertikalne in horizontalne reze, z ALU preklopnimi prisloni in ALU vmesno podporo, z napravo za predrezovanje SUPER-CUT Motor 3 kW - 400 V Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. Rsdpfxeu R Szaj Acysw - New demonstration machine -

Stanje: novo, Leto izdelave: 2026, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. Redpfemb U Tujx Acysw • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 712520122, FRUMECAR ECA 3000 vollmobile Betonmischanlage Zustand: NEU Leistung: 120 m³/h Mischer: Sicoma MAO Mischergröße: 3 m³ Zementsilos: 2x 55 t Garantie: 1 Jahr ab Inbetriebnahme Rsdpehd Na Uofx Acyew Weitere Maschinen und Mischanlagen finden Sie auf unserer Website. Weitere Informationen Verwendungszweck: Bauwesen Verwendbares Material: Beton Allgemeiner Zustand: sehr gut Technischer Zustand: sehr gut Optischer Zustand: sehr gut