Weiler Praktikus nakup rabljenega (200)

Leto izdelave: 1977, stanje: rabljeno, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Hnsdpsnkad Sjfx Ag Asu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Hnedpfx Agjvivmys Aou >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Hnodevtp Edspfx Ag Aou Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Hodpfxothd Shs Ag Aenu Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop Hnjdpfou Aftgex Ag Aeu >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1999, Premer obdelovanca nad strojno posteljo: 280 mm Premer obdelovanca nad podpornikom: 150 mm Dolžina obdelovanca: 500 mm Višina med čeljustmi nad strojno posteljo: 140 mm Razdalja med čeljustmi: 500 mm Širina strojne postelje: 205 mm Premer vretena: 40 mm Območje vrtljajev – brezstopenjsko: 30 – 4.000 vrt/min Premer 3-čeljustne glave: 140 mm Hitromenski nosilec MULTIFIX, tip A Moč pogona – motor vretena: 4,0 kW Stožčasta povezava v vodilu zadnjega podstavka: MK 3 Premer vodila: 40 mm Hod vodila: 85 mm Napetost: 400 V Skupna poraba moči: 7,5 kW Masa stroja: približno 800 kg Potrebna površina: približno 1,40 x 0,95 x 1,55 m Hsdpfx Aoz Abw Hjg Ajnu !!! Stanje skoraj novega stroja !!! Stroj je iz poklicne šole! Uporabljen samo kot demonstracijski stroj. - Tovarniška številka: 154 - 3-osna digitalna prikazovalna enota SIEMENS - 3-čeljustna glava z navojnim vpenjalom RHÖM - Hitromenski jekleni nosilec MULTIFIX - vrtljiva centrirna konica

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 165 mm, širina na sredini: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model stands out for its exceptionally user-friendly operation and an excellent ratio of footprint to center height and center distance. The Condor B is positioned between the Weiler Praktikant and Weiler Commodor models, making it a true all-rounder for any workshop. The machine has been partially overhauled in our workshop, ensuring that it is in excellent technical and optical condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers can be shifted with ease. You are welcome to inspect the machine on-site to verify its condition. Availability: upon request Centre Height: 165mm Centre Distance: 750mm Spindle Bore: Ø 40mm Tailstock Taper: MT3 Chuck Mount: Short Taper DIN55027 Size 5 with bayonet lock Quill Travel: 85mm Speeds: 22–2800 rpm Thread Types: Metric, Imperial, Module, Diametral Pitch Metric Thread Pitches: 0.18–28mm Spindle Brake: Switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stops, lead- and feed screw covers (optional), operating manual, and much more on request. Our service promise to you: - We are a certified master craftsman company specializing in mechanical engineering. - All machines are at least workshop tested. - All lubricants and, if necessary, worn components are replaced prior to sale. Hnsdjw N Np Sspfx Ag Aeu - On request, we can provide a partial or complete overhaul of the selected machine. - On request, we can repaint the selected machine in your desired color. - On request, you can order additional accessories such as tools directly from us. - On request, we can also install further accessories such as safety equipment. - We are happy to organize shipping and/or installation for you.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 140 B Lead and Feed Spindle Lathe, toolroom precision, with NEW K&C 3-axis digital readout! Technical Data: >> Year of manufacture: 1989 Machine no.: 89-140-1471 >> Centre height: 140 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Switchable spindle brake >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Equipment: >> NEW 3-axis digital readout by K&C, 12-month manufacturer's warranty with operator’s manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch >> Collet chuck NEW, collet range 3 to 25 mm in 1 mm steps NEW >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size A with 2 steel holders >> Face plate >> Bed stop >> Rear wall Hnodpfxsymdyms Ag Asu >> Machine feet >> Electronic spindle guard >> Operating manual For safety: Electronic spindle guard, lead and feed spindle covers, 2 emergency stops, spindle brake, electronic gear cover safety interlock About the machine: For sale is a Weiler Praktikant 140 B lead and feed spindle lathe in very good condition. This fine lathe comes from a training workshop. The slides all move smoothly and evenly. The Weiler runs quietly even at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take advantage of the opportunity to inspect and test the machine under power on site and see its condition for yourself.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ta stružnica Weiler Commodor prihaja iz tehnične šole, zato ima malo delovnih ur. Lahko uporabljena in ni bila močno obremenjena – čista, zanesljiva naprava z dolgo življenjsko dobo. Hnjdpfx Agow U Sx Ho Aou Dolžina struženja: 1.000 mm. Premer struženja nad ležiščem: 380 mm. Premer struženja nad prečnim suportom: 190 mm. Število vrtljajev vretena: 25 – 2.000 min⁻¹. Število stopenj hitrosti: 18. Premer vretenaste luknje: Ø 56,0 mm. Vretenov konus: MK DIN 228 / MK 4. Vretenova prirobnica: DIN 55027 / velikost 6. Pomik rezkalne glave: 150 mm. Širina ležišča: 310 mm. Podaljšano podajanje – vzdolžno: 0,022 – 0,8 mm/obrat. Podaljšano podajanje – prečno: 0,011 – 0,4 mm/obrat. Napetost: 380 V. Skupna potrebna moč: 7,5 kW.

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck system with 15 collets. Hedpfeuqb Emox Ag Aenu The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: rabljeno, Tour L + Z VOEST ALPINE - WEILER type DA 210 / 1 N° de machine 1-004/2552 Année de fabrication 1983 Distance entre pointes : 1000 mm Diamètre de tournage au-dessus du banc : 420 mm Hauteur de pointe au-dessus du banc : 210 mm Diamètre de tournage au-dessus du chariot transversal : 240 mm Hauteur de pointe au-dessus du chariot transversal : 120 mm Alésage de broche : 52 mm Vitesse de broche : 33 - 1500 tr/min, 12 vitesses Hedpfxjykca Hs Ag Ajnu Bride de mandrin : cône court DIN 55027 Taille 6, 4x M12 Cône de la contre-pointe : CM 4 Puissance moteur : 5,5 kW Alimentation : 380 Volts, 50 Hz - Vitesses de broche par boîte à 12 vitesses - Mandrin à 3 mors EMCO Ø 200 mm avec mors standards et mors inversés - Porte-outil à changement rapide Multifix taille B avec 3 porte-outils interchangeables - Avance automatique longitudinale et transversale - Installation de liquide de refroidissement - Frein de broche - Arrêt d'urgence - Lampe machine - Manuel d'utilisation Encombrement (L x l x H) : 2200 x 1200 x 1450 mm Poids : 1400 kg Très bon état

Stanje: rabljeno, Leto izdelave: 1996, Weiler vodilno- in vlečno-vretenska stružnica Tip/model: Condor AC Stanje: rabljeno Leto izdelave: 1996 Tehnični podatki: Višina konic: 165 mm Razdalja med konicama: 750 mm Premer vrtenja nad posteljo: 330 mm Premer vrtenja nad prečnikom: 180 mm Premer vretena: Ø 40 mm Brezstopenjsko število vrtljajev vretena: 22 - 2.800 min⁻¹ Glava vretena: DIN 55027 velikost 5 (kratki stožec) Pogonska moč: 5,5 kW Konjiček in pomiki: Stožec v konjičku: MK 3 Hod pinole: 110 mm Področje pomika: avtomatski vzdolžni in prečni pomiki: pribl. 0,016 - 0,50 mm/obrat Navojno področje: primerno za metrične in colske navoje: pribl. 0,20 - 28 mm Dimenzije (D/Š/V): pribl. 2000 mm x 860 mm x 1600 mm Teža pribl.: 1.100 kg Hnodpszfgupefx Ag Aju Oprema: - Hitroizmenljivi nosilec orodja sistem Multifix, 1 nastavek velikost A - Posteljska omejitev - Naprava za hlajenje - Zaščita za vpenjalno glavo z končnim stikalom - Naprava za vpenjalne tule z varnilom končnega stikala Stroški dostave po špediciji do roba pločnika glejte v košarici ali v individualni ponudbi pri povpraševalnih artiklih.

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Hedpfx Agow I A Uxe Aenu Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm Hodjvv Etvjpfx Ag Asnu >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1989, 1 rabljena rezkalna in vretenarska stroj Proizvajalec: Weiler Tip: Condor B Letnik izdelave: 1989 Serijska številka: 89-1314 Tehnični podatki: Razdalja med centri: 750 mm Hnodpfxoz Adv Eo Ag Aou Višina med centri: 165 mm Premer vretena: 40 mm Število vrtljajev: 22 – 2800 vrt/min Podporni nosilec: MK 3 Moč pogona: 1,6 / 3,2 kW Teža: 1040 kg Dimenzije: 1.850 x 880 x 1.290 mm oprema: Digitalni prikazovalnik za 3 osi Ročni sistem za vpenjanje Zaščita vretena

Stanje: rabljeno, Leto izdelave: 1981, številka stroja/vozila: 283, Št. naročila: 26208 Tehnični podatki: - Največja višina med konicami: 120 mm - Razdalja med konicami: 450 mm - Največji premer obdelovanca nad ležiščem: 250 mm - Premer vretena: 23 mm - Vreteno z navojem po standardu DIN 55027 - Stožčasta opora za nastavek vretena: MK 2 - 20 hitrosti vretena: 60 – 3000 vrt/min - Poti podajanja: - vzdolžna: 0,03 – 3,0 mm - prečna: 0,015 – 0,150 mm Hnsdpfx Agozyl H He Asu - Navojni korak: 0,25 – 5 mm - Pogon: 400 V / 1,1 / 1,5 kW - Potrebna površina: pribl. Š 1200 x V 1250 x G 650 mm - Teža: pribl. 700 kg - Vključuje: - 3-čeljustno vpenjalno glavo - Hitro nastavljiv držalo za orodje - Vrteče konice za označevanje - Ločeno omarico za orodje z različno opremo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Weiler Primus VC Hnodey I U Dyepfx Ag Asu Lathe Primus VC with Heidenhain Digital Display, Year of Manufacture 2004, in Excellent Original Condition This machine comes from the prototype workshop of a renowned German mechanical engineering company. CE-compliant!! Technical data: Year of manufacture: 2004 Weiler Primus VC Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Possible thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: engageable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (LxHxW) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE Declaration of Conformity About the machine: The Weiler Primus VC is the smallest model in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and an impressive 4 kW drive output (40% duty cycle). This compact machine with big capabilities is ideal wherever maximum precision is needed in tight spaces, such as in optics, electrical, and automotive workshops, laboratories, and even Formula 1. For sale is a Weiler Primus VC lathe with Heidenhain digital display, year of manufacture 2004. This lathe is in excellent original condition and was only lightly used in the prototype construction area of its previous company. The control is very easy to use. The guides are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler Primus VC under power at our premises. You can find more lathes from well-known manufacturers on our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Fiksna luneta za stružnico WEILER E40 in E50 v zelo dobrem stanju. Cena lunete E40: 2.500 € Hsdpetx Avkjfx Ag Asnu Cena lunete E50: 2.850 € Obseg vpenjanja: 10 - 150 mm.

Stanje: dober (rabljeno), Leto izdelave: 1997, Največja razdalja med konicama 950 mm Največja višina med konicama 200 mm Hjdpezxqvkefx Ag Aenu Premer obročnega gibanja nad strojno mizo 410 mm Premer obročnega gibanja nad podporo 200 mm Širina strojne mize 330 mm Celoten območje vrtljajev 1 – 3000 vrt/min Dokumentacija je na voljo (glejte slike).

Stanje: rabljeno, Leto izdelave: 2000, Višina konic 400 mm Razdalja med konicama 3.000 mm Hedey Ty Ihopfx Ag Asnu Maks. premer vrtenja nad ležiščem 810 mm Maks. premer vrtenja nad prečnim suportom 510 mm Maks. premer vrtenja v zarezi 850 mm Krmiljenje WEILER Maks. masa obdelovanca 3.800 kg Premer vretena v prednjem ležaju 150 mm Premer vretenine 106 mm Premer planske plošče 630 mm Orodni sistem Parat Konus pinole konjička MK 6 Premer pinole 115 mm Območje vrtljajev vretena 1 - 1.800 min⁻¹ Ciklično krmiljen stružni stroj WEILER E80 x 3000, opremljen s plansko ploščo premera 630 mm, 400 mm triodnimi čeljustmi SCHUNK ROTA-S plus, držalom za izvrtalne palice, orodnim sistemom PARAT in transportnim trakom za odrezke. V obsegu dobave je vključen obsežen paket orodja. Video stroja iz tovarniške lokacije vam z veseljem pošljemo na zahtevo. Stroj je v dobrem stanju. Za dodatne tehnične podatke glejte ponudbo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Oznake: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1992, Lathe WEILER Precision Center Lathe in Ergonomic Design The Weiler Ergodor is the first German lathe designed with an ergonomic concept. It provides a more humane workplace and helps prevent health issues. The key feature: the operator can use this lathe both standing and sitting. Technical Data Distance between centers: 470 mm Turning length: 430 mm Center height: 145 mm Hnodsvgqu Hopfx Ag Aou Swing diameter over cross slide: 160 mm Swing diameter over bed: 300 mm Spindle head, short taper flange Bayonet mount DIN 55022 Size 5 or Camlock mount D 1-ASA-4 Spindle bore: 36 mm DIN 55022 Size 5 spindle internal taper Spindle speeds Speeds: 30 – 3550 rpm S Speeds: 15 – 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Cross slide travel: 150 mm Top slide travel: 100 mm Feeds and thread pitches on the gearbox selectable in 30 steps Section 2 1.5/3 kW 38 Gearbox reduction: 3 20 Longitudinal feeds: 150 mm via change gears, 100 mm via toothed belt Face feeds = 1/2 longitudinal feed rates Metric threads: 0.2 – 12 mm Module threads: 0.1 – 4 Dimensions: 1450 x 640 x 1500 mm Net weight: 1000 kg Acceptance as per toolmaker's accuracy to DIN 8605 20 Built according to occupational safety regulations, official test no. A. EM 11 1545/80. Dimensions (French: Encombrement): 1450 x 640 x 1500 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A Hsdev D Ip Nepfx Ag Ajnu - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 Hedpfx Aevrckqsg Ajnu >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Weiler Primus Odlično stanje! Hnjdpfeyy Ngtjx Ag Aeu Z dodatno opremo

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm Hnjdpswrm Dtjfx Ag Aju >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.