Valjanju Navojev nakup rabljenega (410)

Stanje: dober (rabljeno), Thread cutting machine Hahn und Goebel HG 12E Kjdpfod Rkbrex Agksdw Spindle speed: 180-900 rpm 380V Machine No. 1917/16 Thread range: M4-M65

Stanje: dober (rabljeno), Drilling capacity: up to 10 mm Spindle mount: Drill chuck Speed range: Pulley diameters Motor side: Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Kodpfx Ajh Hrkiogkodw Motor speed: 800 rpm Stroke: 100 mm Throat: 300 mm Table: 400 x 400 mm Distance table – drill chuck max: 580 mm Distance table – drill chuck min: 130 mm Table: 400 x 400 mm Footprint: 750 x 480 mm Total connected load: 0.4 kW Accessories/Equipment: Drill chuck Condition: Good Weight: 170 kg Dimensions: 750 x 480 x 1,450 mm

Stanje: novo, Thread diameter: M6 - M36 mm Rotational speed: 156 rpm Radius: 1200 mm Angle adjustable from 0 - 90 degrees Machine weight approx. 0.4 t Kodpfx Aog N Nl Iegkjdw Space requirement approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - Machine head swivels from 0 to 90 degrees - Quick-change chuck with slip clutch for safe thread cutting without risk of breakage - Reversible rotation selectable directly on the machine head - Thread size, speed, pitch, and cutting depth adjustable via touchscreen on the swivel arm - Manual mode: Upon reaching the set cutting depth, the spindle stops automatically; forward and reverse rotation must be activated manually. - Automatic mode: Upon reaching the set cutting depth, the machine automatically changes from forward to reverse—ideal for tapping multiple blind holes Includes one thread tapping chuck GT12 each for M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Base frame: 900 x 600 x 875 mm

Stanje: zelo dobro (rabljeno), Thread cutting steel (28397) Manufacturer: Komet Type: FG II 60 degrees with tool holder type RB ST III Kdedpfemk E Ubsx Agkow unused, from stock liquidation

Stanje: dober (rabljeno), Leto izdelave: 2007, Premer obdelovanca 1400 mm Premer izvrtine 100–500 mm Krmiljenje Sinumerik 840D Kdodpfx Aowzmqrsgksw

Leto izdelave: 2023, Stanje: skoraj kot novo (rabljeno), Machine name: Chun Zu CPR Series thread rolling machine Thread diameter range: 2 - 42 mm Thread length range: 3 - 250 mm Shank length under head: 3 - 350 mm Maximum rolling force: 150,000 kgf Kdjdpfew Dn Epox Agkjw Frame &

Stanje: dober (rabljeno), Nosilec za rezanje navojev, glava za navoje, vpenjalna glava za rezanje navojev, rezkalno orodje, aparat za rezanje navojev, dvokraka glava za rezanje navojev -Proizvajalec: Bahmüller, nosilec za rezanje navojev s hitro zatezno vpenjalno glavo -Tip: 18.6012 - Bahmüller SK40x36 A 125 -Vpenjalna glava: Albrecht 1/8-5/8" / 3-16 mm -Dimenzija: Ø 63 x 350 mm -Teža: 4,4 kg Kdjdpfx Ajxdxb Esgkew

Leto izdelave: 1995, Stanje: dober (rabljeno), Hydraulic 2-roll thread rolling machine Seny, model D-44 EH, hydraulic drive, manual and automatic cycle, adjustable roller speed. Max. threading diameter: 40 mm, min. diameter: 3 mm, up to pitch 3.5 mm, max. knurling pitch: 1.75 mm, max. roller width: 80 mm, roller diameter min. 80 mm / max. 120 mm, spindle speed: 47–94 rpm, roller holder shaft diameter: 40 mm, center distance min. 80 mm / max. 165 mm, max. working stroke: 7 mm, feed rate from 0.5 to 6 mm/s, rolling time from 0.1 to 100 seconds, roller holder shaft tilt: ±5°, main motor power: 3 kW, total installed power: 4.68 kW, tank capacity: 150 L, approx. weight: 1100 kg, equipped with various rollers. Kdsdspwbvkopfx Agkew

Stanje: novo, Thread Diameter: M6 - M24 mm Speed: 200 rpm Radius: 1200 mm Adjustable Angle: 0 - 90 degrees Machine Weight: approx. 0.4 t Required Space: approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise threading with a freely positionable swing arm - Machine head swivels from 0 to 90 degrees - Quick-change chuck with slip clutch for safe threading with no risk of breakage - Forward/reverse operation selectable on the machine head Ksdpog N Nl Dofx Agkedw - Thread size, speed, pitch, and thread depth adjustable via touchscreen on the swing arm - Manual mode: once the preset thread depth is reached, the spindle stops automatically; forward and reverse must be manually activated - Automatic mode: after reaching the preset thread depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Includes one each of thread tapping chucks GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Stanje: zelo dobro (rabljeno), Thread cutting unit Efem No. 1 for internal threads mount MK 2 thread cutting head adjustable slip clutch thread range M3 - M10 mechanical condition very good Kedetqlq Ejpfx Agkodw cosmetically shows storage marks

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024JT05VL, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 16 mm, delovno območje: 2.000 mm, skupna masa: 19 kg, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 500 obr/min, globina grla: 2.000 mm, višina mize: 870 mm, širina mize: 800 mm, dolžina mize: 600 mm, Oprema: dokumentacija / priročnik, VOLUMEC JoyTap 3150 - Thread Cutting Unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for Joytap – assistive control for thread cutting 1. NEW ALUMINIUM STRUCTURE with an EXCLUSIVE Volumec profile for increased rigidity and precision compared to other models 2. Enhanced articulated arm mechanics for smoother movement and increased force 3. NEXT-GENERATION (G2) BRUSHLESS MOTOR providing unmatched performance and reliability 4. INTEGRATED CABLING, which does not restrict mobility 5. VASTC TOUCH PANEL, the most advanced device on the market for screwdriving and thread cutting applications, now with new features and programmable torque (Nm) 6. MULTIDIRECTIONAL HEAD with automatic locking, allows 0-90° workpiece alignment 7. QUICK-CHANGE COUPLING SPINDLE THREAD CUTTING: • AUTOMATIC THREAD CUTTING (settings for pitch, depth, speed, and torque (Nm) to protect the tools) • THREAD CUTTING with PROGRAMMABLE CHIP BREAKAGE • MANUAL THREAD CUTTING (preset speed and torque (Nm) for tool protection) • THREAD COUNTING function • PROGRAM MEMORY, password-protected • Easy PROGRAMMING via the INTEGRATED INTERFACE • PROGRAM MEMORY for recurring applications • CONSTANT SPEED AND TORQUE during thread cutting thanks to the rotary encoder WORK TABLE: Size: 800x600 mm Kodpfovr U Unox Agkedw Height: 870 mm 30 mm base made of milled steel with T-slots in the interior compartment

Stanje: zelo dobro (rabljeno), Območje rezanja: M1-M6 v jeklu M1-M8 v litini M1-M10 v lahki kovini in medenini Hitrosti vrtenja: 710-1120-1800 min⁻¹ Kdjdpfoxg Al Hox Agkow Moč motorja: 0,37 kW Vključno z 1 kosom navojnega vodilnega vretena Čista stroj, v zelo dobrem stanju.

Leto izdelave: 2022, Stanje: novo, Pneumatic Tapping Arm Model: R1950-08 Capacity: M2–M8 Speed (rpm): 700 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Kdodpfx Ajipmr Ijgkew Model: R1950-12 Capacity: M3–M12 Speed (rpm): 400 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-16 Capacity: M3–M16 Speed (rpm): 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 27 kg Collet Interface: TCS 2B Model: R1950-020 Capacity: M3–M20 Speed (rpm): 150 / 400 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-022 Capacity: M3–M22 Speed (rpm): 120 / 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-027 Capacity: M3–M27 Speed (rpm): 70 / 220 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic motor - 6 safety clutch adapters of your choice - Mounting column with flange - Radial extension arm (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Stanje: pripravljen za uporabo (rabljen), Stroj za navoj Ridgid 1224, rezalnik navojev, rabljeni stroj Splošne dimenzije: Ksdpfx Agjwwgvysksdw Dolžina: 1140 mm Širina: 720 mm Višina: 1110 mm Zmogljivosti: Rezanje navojev na cevi: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) z dodatkom za navijanje z zobniškim prenosom 161. Rezanje navojev na vijakih: 1⁄4″ – 2″ (6 – 52 mm). Lastnosti: Navijanje navojev na cevi 1⁄4″ – 2″ pri 36 obr/min in na cevi 2½″ – 4″ pri 12 obr/min. Model 1224 je primeren za navoj različnih vrst cevi, vključno s črnimi, pocinkanimi, s plastično prevleko, kot tudi nerjavne cevi, IMC cevi ter cevi in palice z debelo steno do 30 Rockwell C trdote. Indukcijski motor zagotavlja, da raven hrupa ostaja v zakonsko dovoljenih mejah. Posebni motor s zagonom na kondenzator/kondenzatorskim delovanjem omogoča poln obseg navijanja tudi pri padcu napetosti. Uporablja univerzalno glavo za navoje 1⁄4″ – 2″ in nastavljivo glavo 2½″ – 4″ za rezanje stožčastih ali ravnih NPT/NPSM ali BSPT/BSPP navojev. Stalno in pravilno mazanje nožev in obdelovancev preko mazanja skozi glavo. Tehnične specifikacije: Motor: 1,1 kW, enofazni, 50 Hz, indukcijski tip. Stikala: robustno rotacijsko stikalo za vzvratno vožnjo / izklop / naprej in vgražena stopalka. Hitrost vretena: 36/12 obr/min. Menjalnik: dvostopenjski prenos z razmerjem 3:1. Vpenjalna glava: kladivna izvedba z zamenljivimi vložki. Zadnja centrirna naprava: izvedba z ekscentričnim odmičnikom. Rezalnik za cevi: model 764, popolnoma samonastavljiv in samozcentrirajoč, z rezilom F-229 za cevi od 1⁄4″ do 4″. Razširjevalec (rahljalnik): model 744, z rezili, 1⁄4″ – 4″. Mazanje: skozi glavo za navoje. Črpalka: samozasenčna, zobniška, samodejno reverzirajoča, s konstantnim pretokom.

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), Tehnični podatki: - Kapaciteta: 500 žebljev/min - Moč: 7 kW - Premer žice: 1,0 – 4,2 mm Kedpfx Agjh Hp H Sjkedw - Dolžina žebljev: 30 – 150 mm - Leto izdelave: 1998

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 620050039, skupna masa: 2.550 kg, Rabljeni stroj za valjanje navojev PeeWee Tip P20SR, vzdrževan, malo delovnih ur (brez števca delovnih ur), popolnoma funkcionalen. Možnost ogleda in preizkusa pod napetostjo. Vključeno nakladanje z viličarjem. Priložena navodila za uporabo/električna shema. Vključno z 20 kompleti (40 kosov) valjev za navoje (nov komplet cca 1100 EUR). Kdsdpexalinsfx Agkjw

Stanje: dober (rabljeno), Max. drilling capacity ∅20 mm/ 600 N/mm² Total stroke 125 mm Working stroke, infinitely adjustable 125 mm Feed force at 6 bar 4130 N Max. transmissible torque 80 Nm Speed range at 50 Hz 360–5800 rpm Speed range at 60 Hz 432–6960 rpm Max. permissible speed 8000 rpm Feed rate 30–2400 mm/min Air consumption 0.45 l/cm stroke Runout accuracy 0.01 mm Tool holder – Standard ISO 30 / HSK 50 Kdedpfx Aevxryhogkow Inductive limit switch 24 V Mains voltage 230/460 V Motor speed at 50 Hz 2900/1450/970 rpm Motor speed at 60 Hz 3480/1740/1160 rpm Motor power at 50 Hz 1.5 kW / 1.1 kW Motor power at 60 Hz 1.8 kW / 1.3 kW Weight / Colour 73 kg / RAL 5012

Stanje: rabljeno, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Kdodpfx Agoh A S Htokjw Manufacturer: PEE-WEE Type: P 24 Q Serial No. LC2403099 Year of manufacture: 2004 Rolling force: max. 24 tons Tool diameter: max. 200 mm Rolling spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Holder length, tool length: max. 180 mm Workpiece diameter: max. 50 mm Rolling spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic motor power: approx. 3 kW Roll drive motor power: 5.5 kW Power supply: 400 Volts, 50 Hz - Swiveling rolling spindle for through-feed thread rolling - Rolling spindle speed adjustable in 4 stages via gear shift - Hydraulic system integrated in machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge rolling: Thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to its nominal diameter. The maximum thread length is equal to the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools consist of three sections: lead-in, calibrating area, and run-out. Groove rolls have no pitch and are swiveled by the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle equals the pitch angle in the workpiece.

Leto izdelave: 2023, Stanje: novo, Model: R950-08 Kjdoipmpzjpfx Agkjdw Capacity: M2-M8 Speed (rpm): 700 Air Consumption: 750 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 38x29) Weight: 18 kg Adapter Mount: TCS 1B Model: R950-12 Capacity: M3-M12 Speed (rpm): 400 Air Consumption: 750 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 38x29) Weight: 18 kg Adapter Mount: TCS 1B Model: R950-16 Capacity: M3-M16 Speed (rpm): 300 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 38x29) Weight: 25 kg Adapter Mount: TCS 2B Model: R950-020 Capacity: M3-M20 Speed (rpm): 150 / 400 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 58x40) Weight: 29 kg Adapter Mount: TCS 2B Model: R950-022 Capacity: M3-M22 Speed (rpm): 120 / 300 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 58x40) Weight: 29 kg Adapter Mount: TCS 2B Model: R950-027 Capacity: M3-M27 Speed (rpm): 70 / 220 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 58x40) Weight: 29 kg Adapter Mount: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic motor - 6 safety slip clutches of your choice - Guide column with mounting flange - Radial extension arm (for more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Stanje: rabljeno, Leto izdelave: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/lead Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Workpiece Loading Device Type MZ 600, Year of manufacture approx. 1991, #3591 Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Starts: 1 Minimum/maximum centre distance tool–workpiece: 0 - 70 mm Whirling head swiveling: +/-12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/lead Whirling head drive: approx. 1.5 kW Total drive approx.: 4.5 kW – 220 V/380 V / 50 Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Kdsdpfx Aet Hwzcjgkew Machine designed for the production of medical screws. Equipped with an automatic workpiece feeder via a Rübenach vibratory bowl with pneumatic swing gripper for insertion of blanks, as well as with counter-center (inserter) and ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and a cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, and the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display of motion sequence. Fault indicator, workpiece counter, oil mist extraction, coolant system, etc.

Stanje: rabljeno, Internal Thread Cutting Machine Hagen & Goebel Type HG 124 Machine No. 4112 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M15 Thread cutting capacity in brass: M3 to M17.5 Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 – 1000 rpm Motor power: 0.55 / 1.0 kW Electrical connection: 380 Volt, 50 Hz - 6 speed settings via belt change (3 belt steps + 2 motor speeds) - Thread pitch via lead cartridge Kedpehgnd Ajfx Agksdw - 2 lead cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via hand crank on round column - Spindle taper Ø 14.8 to 16 mm - Keyed drill chuck Ø 1 to 13 mm Required space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg In good condition

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 50 mm Thread length: 100 mm Thread pitch: mm Total power requirement: 1 kW Machine weight approx.: 1,500 kg Space requirements approx.: m MONNIER & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type: 256 Year of manufacture: approx. 1985 # 1349 _____ Max. workpiece diameter: 1.5 – 50 mm Max. workpiece length: 100 mm Axial milling length: 100 mm Module in steel: 1 Minimum worm starts: 1 Min./max. center distance tool-workpiece: 0 – 70 mm Milling slide swiveling: +/- 30° Cutter size (Ø x length): 70 x 16 mm Cutter speeds approx.: 1,000 rpm Feed range, steplessly adjustable: 0 – 6 m/min Spindle drive: approx. 0.6 kW Total drive: approx. 1 kW - 220 V/380 V / 50 Hz Weight: approx. 1,500 kg Accessories / special equipment: • Simple machine for manufacturing (medical) screws or worm gearing onto shaft-shaped workpieces • LANDIS & GYR program control PCA • Fold-out workpiece magazine, incomplete • Pneumatic tailstock slide, or steady rest support, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for generating thread pitches • Workpiece counter Condition: Good – ready for demonstration, under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We have approx. 100 further gear machines in stock and welcome your inquiry. Kdodpfx Ajt Hwn Njgksw

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Ksdeuz If Nspfx Agkedw Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication. Kdedpfx Ast Hw N Togkew

Stanje: rabljeno, Internal Thread Cutting Machine HAGEN & GOEBEL Type HG 10 Thread Cutting Machine, Vertical Tapping Machine Machine No. 4462 Year of manufacture approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M16 Thread cutting capacity in brass: M3 to M18 mm Throat depth: 250 mm Quill stroke: 80 mm Table size: 340 x 240 mm Spindle speed: 200-1000 rpm, 6 steps Motor power: 0.55 and 0.75 kW Power supply: 380 Volt, 50 Hz - 6 speed settings via 2 motor speeds and 3 belt stages - Thread pitch by means of guide cartridge - 2 guide cartridges included, with 1.0 mm and 1.25 mm thread pitch - Spindle mount with taper Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with rack-and-pinion and hand crank on the round column - Quick-change tapping chuck, size 1, Ø 19 mm Required space (L x W x H): 850 x 550 x 1800 mm Weight: 255 kg Good condition Ksdpoupbf Defx Agkjdw